Yishin Li wrote:
I see. One more question: Pico-Systems' Universal PWM Controller also has
a FPGA on it. How does its firmware/source-code get distributed?
It is on an SST serial EEPROM on the board. I have a circuit that
allows these to be read
by the FPGA (newer Xilinx FPGAs know
Date: Wed, 23 May 2012 15:41:01 +0800
From: Yishin Li y...@araisrobo.com
Subject: Re: [Emc-users] Intel DN2800MT - possible new LinuxCNC star?
Our repositories are at github. Please refer to this wiki page to access it:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ArtekBranch
The BeagleBone
On Thu, May 24, 2012 at 5:52 AM, Ralph Stirling
ralph.stirl...@wallawalla.edu wrote:
Our repositories are at github. Please refer to this wiki page to access
it:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ArtekBranch
The BeagleBone related modifications are at beagle branch.
I will
On 24 May 2012 00:23, Yishin Li y...@araisrobo.com wrote:
Releasing HDL of the FPGA design is another issue. IMHO, it doesn't help
too much for the development by releasing the HDL source code. AFAIK, the
hostmot2 logic is only maintained by mesa; there is no community for
developing it yet.
On Thu, May 24, 2012 at 7:37 AM, andy pugh bodge...@gmail.com wrote:
On 24 May 2012 00:23, Yishin Li y...@araisrobo.com wrote:
Releasing HDL of the FPGA design is another issue. IMHO, it doesn't help
too much for the development by releasing the HDL source code. AFAIK, the
hostmot2 logic