Thanks again, sir :)
Phil T.
The Feral Engineer
Check out my LinuxCNC tutorials, machine builds and other antics at
www.youtube.com/c/theferalengineer
On Fri, Mar 5, 2021, 10:38 PM Gene Heskett wrote:
> On Friday 05 March 2021 21:17:12 Feral Engineer wrote:
>
> > Thanks Gene
> >
> > My emco
On Friday 05 March 2021 21:17:12 Feral Engineer wrote:
> Thanks Gene
>
> My emco is running a pi 4 as well. Model b, 4gb. What kind of latency
> figures are you getting on your servo thread? I find mine to be a bit
> finicky unless I keep wifi off
About 12 u-s. Worst I ever recorded was 200 u-s
Thanks Gene
My emco is running a pi 4 as well. Model b, 4gb. What kind of latency
figures are you getting on your servo thread? I find mine to be a bit
finicky unless I keep wifi off
Phil T.
The Feral Engineer
Check out my LinuxCNC tutorials, machine builds and other antics at
On Friday 05 March 2021 18:35:19 andy pugh wrote:
> On Fri, 5 Mar 2021 at 23:31, Feral Engineer
wrote:
> > Can someone send me a copypasta of their spindle hal stuff? Pid,
> > ff0,1,2 encoder feedback, all that?
>
> I don't actually run PID on my lathe spindle. I have some moderately
> complex
Lenze 8200 vector from an emco pc turn 55
Phil T.
The Feral Engineer
Check out my LinuxCNC tutorials, machine builds and other antics at
www.youtube.com/c/theferalengineer
On Fri, Mar 5, 2021, 7:34 PM andy pugh wrote:
> On Sat, 6 Mar 2021 at 00:07, Feral Engineer
> wrote:
> > I've got 2
On Sat, 6 Mar 2021 at 00:07, Feral Engineer wrote:
> I've got 2 speed pulleys on mine 2000 and 4000rpm. Just want to try and
> fine tune the rpm and see if there's a way to soften the acc/dec without
> messing with the vfd (don't have the removable programming panel).
Which VFD is it? In some
I've got 2 speed pulleys on mine 2000 and 4000rpm. Just want to try and
fine tune the rpm and see if there's a way to soften the acc/dec without
messing with the vfd (don't have the removable programming panel). Plus, i
like to tinker with stuff to learn more about it.
Phil T.
The Feral Engineer
On Fri, 5 Mar 2021 at 23:31, Feral Engineer wrote:
>
> Can someone send me a copypasta of their spindle hal stuff? Pid, ff0,1,2
> encoder feedback, all that?
I don't actually run PID on my lathe spindle. I have some moderately
complex gear selection stuff going on, but otherwise I just trust the
Can someone send me a copypasta of their spindle hal stuff? Pid, ff0,1,2
encoder feedback, all that? Gonna tackle the one on my machine but I've
never done it before, so a starting point would be helpful.
TIA
Phil T.
The Feral Engineer
Check out my LinuxCNC tutorials, machine builds and other
