Hi
3 years ago I did talk to Michigan Institute. There was PhD student from
Thailand that work on 3d metal printer etc.
School can produce papers talk etc but I can not to see part made in
Michigan Institute.
I think that m I. Use cure software for plastic printing and try to write
program to
On Tuesday 30 July 2019 05:19:33 Nicklas Karlsson wrote:
> Know a little bit about welding. Have seen manufacturer of welding
> equipment claiming adding some welding on new parts used for digging
> might be good since weld is harder and wear slower.
>
> I am however certain welding is a lot more
Know a little bit about welding. Have seen manufacturer of welding equipment
claiming adding some welding on new parts used for digging might be good since
weld is harder and wear slower.
I am however certain welding is a lot more expensive material than buying a
solid block and are in doubt
On Monday 29 July 2019 22:18:21 TJoseph Powderly wrote:
> Aram
>
> additive machining using MIG is very interesting
> I've seen laser welding used to repair expensive blisks for turbines.
>
> I dont know about welding though,
> but I see many people trying to achieve this.
>
> these maybe of use:
Aram
additive machining using MIG is very interesting
I've seen laser welding used to repair expensive blisks for turbines.
I dont know about welding though,
but I see many people trying to achieve this.
these maybe of use:
Design And Development Of A Low-Cost 3D Metal Printer
https://youtu.be/JJsCT81T4N8
On Sun, Jul 28, 2019 at 7:04 PM a k wrote:
> https://youtu.be/3TBTOxNLo2E
>
> On Sun, Jul 28, 2019 at 6:53 PM a k wrote:
>
>> https://youtu.be/YiT_CgO1-1w
>>
>> On Sun, Jul 28, 2019 at 6:50 PM a k wrote:
>>
>>> here are some info about what my project.
>>>
https://youtu.be/3TBTOxNLo2E
On Sun, Jul 28, 2019 at 6:53 PM a k wrote:
> https://youtu.be/YiT_CgO1-1w
>
> On Sun, Jul 28, 2019 at 6:50 PM a k wrote:
>
>> here are some info about what my project.
>> combination of lcnc and welding need to see some problems .that i have
>>
https://youtu.be/YiT_CgO1-1w
On Sun, Jul 28, 2019 at 6:50 PM a k wrote:
> here are some info about what my project.
> combination of lcnc and welding need to see some problems .that i have
> https://www.youtube.com/watch?v=3TBTOxNLo2E
>
> On Sun, Jul 28, 2019 at 12:01 PM Gene Heskett
>
On Sunday 28 July 2019 12:01:11 Jon Elson wrote:
> On 07/27/2019 10:09 PM, a k wrote:
> > Hi
> > I am interesting if linuxcnc can host different groups , like
> > linuxcnc for application?
> >
> > Right now it is linuxcnc for lathe and mill.
> > Cutting process not under the any questions ,so
On 07/27/2019 10:09 PM, a k wrote:
Hi
I am interesting if linuxcnc can host different groups , like linuxcnc for
application?
Right now it is linuxcnc for lathe and mill.
Cutting process not under the any questions ,so only linuxcnc ...
What about if lcnc does something more complex than
> On 28 Jul 2019, at 05:09, a k wrote:
>
> Right now it is linuxcnc for lathe and mill.
> Cutting process not under the any questions ,so only linuxcnc ...
Yes. LinuxCNC by default runs “milltask” but you could choose others. There
has been a bit of discussion on the forum about the idea
Hi
I am interesting if linuxcnc can host different groups , like linuxcnc for
application?
Right now it is linuxcnc for lathe and mill.
Cutting process not under the any questions ,so only linuxcnc ...
What about if lcnc does something more complex than simple metal etc
cutting?
Here a lot to
12 matches
Mail list logo