On 5/3/20 4:32 AM, Nicklas Karlsson wrote:
On Sat, 2 May 2020 at 16:29, N wrote:
Did not check check then moving but expect a lot less accuracy then at move,
Bear in mind that when the tool position matters the tool is often
stationary in the important direction.
Then it will be more than
> On Sat, 2 May 2020 at 16:29, N wrote:
>
> > Did not check check then moving but expect a lot less accuracy then at move,
>
> Bear in mind that when the tool position matters the tool is often
> stationary in the important direction.
Then it will be more than good enough for drilling, I do
On Sat, 2 May 2020 at 16:29, N wrote:
> Did not check check then moving but expect a lot less accuracy then at move,
Bear in mind that when the tool position matters the tool is often
stationary in the important direction.
> Anyone here have any experience what accuracy is required then
Finally got things running well today.
According to scale then moving to point at standstill accuracy is around a few
micrometers for table and a few times more in "Z" direction. This corresponds
to a few encoder pulses for table and a few times more for "Z" direction. Did
not check check then