On 06/02/2014 03:49 AM, John Thornton wrote:
Let us know what you think about it... might save me from trying it.
I got the Starrett blade. While putting it on the saw, I noticed the
power cord was in really bad shape, so I pulled the saw out to get to
the wiring inside and found four unused
Let us know what you think about it... might save me from trying it.
JT
On 6/1/2014 3:23 PM, Kirk Wallace wrote:
On 06/01/2014 11:39 AM, John Alexander Stewart wrote:
Hate to say this, but I had 3 Starrett blades that would NOT stay on my
cutoff bandsaw. Real frustrating having a bandsaw that
opps
http://www.bandsawbladesdirect.com
JT
On 5/31/2014 11:55 AM, Kirk Wallace wrote:
I haven't bought bandsaw blades for many years so I don't have a known
good source. Does anyone have a favorite source for 93 x .032 x 3/4
steel cutting blades?
I think this is the other place I wanted to try a Starrett blade or two
http://www.bandsawbladesking.com
JT
On 5/31/2014 11:55 AM, Kirk Wallace wrote:
I haven't bought bandsaw blades for many years so I don't have a known
good source. Does anyone have a favorite source for 93 x .032 x 3/4
On Sat, 2014-05-31 at 13:02 -0400, Pete Matos wrote:
Lennox blades are hard to beat. I run them in my horizontal vertical 12
inch saw and it cuts beautiful and lasts awhile unless I screw up and get
it stuck in some tube or something. I get them from my local welding
supply house. they cost
On 05/31/2014 09:55 AM, Kirk Wallace wrote:
I haven't bought bandsaw blades for many years so I don't have a known
good source. Does anyone have a favorite source for 93 x .032 x 3/4
steel cutting blades?
Thanks for the replies Pete, Dave, and John. I'm going to give this
blade a try:
Hate to say this, but I had 3 Starrett blades that would NOT stay on my
cutoff bandsaw. Real frustrating having a bandsaw that took longer to keep
putting blades back on than it did to cut material.
Changed blade for a top of the line blade from importer busybeetools.com,
and it's been perfect
On 06/01/2014 11:39 AM, John Alexander Stewart wrote:
Hate to say this, but I had 3 Starrett blades that would NOT stay on my
cutoff bandsaw. Real frustrating having a bandsaw that took longer to keep
putting blades back on than it did to cut material.
Oops, I guess I'll find out if the blade
On 6/1/2014 12:39 PM, John Alexander Stewart wrote:
Hate to say this, but I had 3 Starrett blades that would NOT stay on my
cutoff bandsaw. Real frustrating having a bandsaw that took longer to keep
putting blades back on than it did to cut material.
Changed blade for a top of the line blade
I haven't bought bandsaw blades for many years so I don't have a known
good source. Does anyone have a favorite source for 93 x .032 x 3/4
steel cutting blades?
--
Kirk Wallace
--
Time is money. Stop wasting it! Get
Lennox blades are hard to beat. I run them in my horizontal vertical 12
inch saw and it cuts beautiful and lasts awhile unless I screw up and get
it stuck in some tube or something. I get them from my local welding
supply house. they cost about $20.00 each. Variable pitch blades are nice
too.
11 matches
Mail list logo