Jack
In this case Google is your friend. There are literally thousands of
ideas from guys who have done their own thing. Two things I recommend
that you don't do without.
1: You must fit a THC of sorts. Especially if you are going to cut
thinner materials.
2: You must fit a water bed for your
2013/9/6 Marius Liebenberg mar...@mastercut.co.za
Jack
In this case Google is your friend. There are literally thousands of
ideas from guys who have done their own thing. Two things I recommend
that you don't do without.
1: You must fit a THC of sorts. Especially if you are going to cut
On Thu, 9/5/13, Jack Coats j...@coats.org wrote:
Subject: [Emc-users] Plasma Table
To: Enhanced Machine Controller (EMC) Emc-users@lists.sourceforge.net
Date: Thursday, September 5, 2013, 8:47 PM
Has anyone done a DIY plasma table,
or have suggestions I could find
out about a DIY version
Yes, I built my own plasma table.
http://s47.photobucket.com/user/johnplctech/library/Plasma%20Cutter?sort=3page=1
In these videos I didn't have a THC
http://www.youtube.com/watch?v=e70jdiDm7yc
http://www.youtube.com/watch?v=knf3cPrZPrk
http://www.youtube.com/watch?v=3o84BzF90JM
John
I take it that you used the Mesa THCAD with your current THC comp?
On 2013/09/06 12:55 PM, John Thornton wrote:
Yes, I built my own plasma table.
http://s47.photobucket.com/user/johnplctech/library/Plasma%20Cutter?sort=3page=1
In these videos I didn't have a THC
Correct my current setup is Mesa 5i25, 7i76, THCAD and Gecko 203v's with
Nema 23 triple stack steppers.
JT
On 9/6/2013 9:34 AM, Marius Liebenberg wrote:
John
I take it that you used the Mesa THCAD with your current THC comp?
On 2013/09/06 12:55 PM, John Thornton wrote:
Yes, I built my own
Has anyone done a DIY plasma table, or have suggestions I could find
out about a DIY version?
I am a rookie and just learning, wanting to find out if it could be
practical for a hobby setup.
TIA, Jack
--
Learn the
Hello!
Since I posted lots of questions on this list about the plasma table I
was building, I thought that I should share something:
http://www.youtube.com/watch?v=OK0hldTjnX0
I took that video with my phone.
I was not able to get the servos work correctly, so I ended up with
stepper motors,
Viesturs;
On 2013-02-19, at 2:35 PM, Viesturs Lācis wrote:
Since I posted lots of questions on this list about the plasma table I
was building, I thought that I should share something:
http://www.youtube.com/watch?v=OK0hldTjnX0
Interesting! Thanks for posting the video.
(have no
