You can't get rotary motion within a canned cycle.
The documentation alludes to this:
Rotational axis words are allowed in canned cycles, but it is better
to omit them. If rotational axis words are used, the numbers must
be the same as the current position numbers so that the
Gentlemen,
I can see many cases of ABC motion in a canned cycle being very useful ie.
a cylindrical part in a rotary table. A canned cycle could easily drill
multiple holes in a cylindrical part with multiple holes in the periphery of
the part.
I can only imagine a few ABC configurations where
On Mon, 2010-11-01 at 14:22 -0500, Stuart Stevenson wrote:
Gentlemen,
I can see many cases of ABC motion in a canned cycle being very useful ie.
a cylindrical part in a rotary table. A canned cycle could easily drill
multiple holes in a cylindrical part with multiple holes in the periphery
Hi,
The emc on documentation
http://linuxcnc.org/docs/html/gcode_main.html#sub:G81:-Drilling-Cycle
shows
G81 X- Y- Z- A- B- C- R- L-
which to me indicates that it should work given C axis values. Is this
correct?
The example from
http://linuxcnc.org/docs/2.3/html/gcode_mill_canned.html