> From: Gene Heskett [mailto:ghesk...@shentel.net]
> On Monday 13 September 2021 18:11:44 John Dammeyer wrote:
>
> > Hi Gene,
> > I was able to use your pyvcp information along with the web documents
> > to get my own slider working. In the CAN message screen grab you can
> > see id=218, dlc=4,
On Monday 13 September 2021 18:11:44 John Dammeyer wrote:
> Hi Gene,
> I was able to use your pyvcp information along with the web documents
> to get my own slider working. In the CAN message screen grab you can
> see id=218, dlc=4, and the first two bytes representing 0x0032 in
> Little Endian
Hi Gene,
I was able to use your pyvcp information along with the web documents to get my
own slider working.
In the CAN message screen grab you can see id=218, dlc=4, and the first two
bytes representing 0x0032 in Little Endian format. That value in decimal is 50.
Scale screen grab shows the
ns.com]
> Sent: September-10-21 10:11 AM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Serial Port access
>
> Hi Andy,
>
> The output below shows CANopen PDO message #2 (0x300) to ID 0x18, 1 byte,
> alternating between 0x01 and 0x00 being issued once
>
On Saturday 11 September 2021 13:33:30 John Dammeyer wrote:
> Hi Gene,
> On Vancouver Island so other end of the country and about 4 days by
> road if one is not driving 24/7.
>
> Thanks for the code fragment. Very helpful.
>
> I do have two buttons
>
> # Tag buttons
> net
gt; Subject: Re: [Emc-users] Serial Port access
>
> On Saturday 11 September 2021 05:02:47 John Dammeyer wrote:
>
> > I'm still waiting for mine to arrive. Latest is that it arrived at
> > Canada Post in Toronto. I'm going to guess it's going via surface
> > from the
On Saturday 11 September 2021 05:02:47 John Dammeyer wrote:
> Hi Gene,
> Hi Gene,
>
> > I don't know much about the CAN bus, but this does sound like a
> > howto to do a relay.
>
> I'm working on the input side of things next.
>
> > But I went a different path as I am using a peristaltic pump
e method I would have used had it been available 2 years
> ago, so thank you John. I believe you have added to linuxcnc's
> capabilities.
>
> > > -Original Message-
> > > From: John Dammeyer [mailto:jo...@autoartisans.com]
> > > Sent: September-10
2 years
ago, so thank you John. I believe you have added to linuxcnc's
capabilities.
> > -Original Message-
> > From: John Dammeyer [mailto:jo...@autoartisans.com]
> > Sent: September-10-21 10:11 AM
> > To: 'Enhanced Machine Controller (EMC)'
> > Subject: Re: [E
mmeyer [mailto:jo...@autoartisans.com]
> Sent: September-10-21 10:11 AM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Serial Port access
>
> Hi Andy,
>
> The output below shows CANopen PDO message #2 (0x300) to ID 0x18, 1 byte,
> alternating between 0x01 an
Hi Andy,
The output below shows CANopen PDO message #2 (0x300) to ID 0x18, 1 byte,
alternating between 0x01 and 0x00 being issued once per second.
pi@raspberrypi:~/projects/python $ python TestSerial.py
Sent CAN message with relay value = t318101
Sent CAN message with relay value = t318100
> From: andy pugh [mailto:bodge...@gmail.com]
>
> On Thu, 9 Sept 2021 at 05:31, John Dammeyer wrote:
>
> > I've been reading
> > http://linuxcnc.org/docs/2.4/html/hal_comp.html
>
> For this application I think that a Pyhon userspace component using
> Pyserial is probably the easier approach.
>
On Thu, 9 Sept 2021 at 05:31, John Dammeyer wrote:
> I've been reading
> http://linuxcnc.org/docs/2.4/html/hal_comp.html
For this application I think that a Pyhon userspace component using
Pyserial is probably the easier approach.
http://linuxcnc.org/docs/2.8/html/hal/halmodule.html
--
atp
BTW, there's also this:
https://forum.linuxcnc.org/forum/18-computer/22562-arduino-based-usb-pendant-for-linuxcnc
> -Original Message-
> From: John Dammeyer [mailto:jo...@autoartisans.com]
> Sent: September-08-21 8:28 PM
> To: Enhanced Machine Controller (EMC)
> Subj
I'm starting the next phase of a small project. I just about have the power
draw bar ready to mount.It's controlled by a small processor with two
buttons for load and release which runs the air valves which move the pneumatic
cylinder and spin butterfly impact wrench.
To load/release
On Tuesday 04 June 2019 09:37:15 am Mark Wendt wrote:
> On Tue, Jun 4, 2019 at 9:24 AM Gene Heskett
wrote:
> > ===
> > # restore sound at every terminal start since starting x shuts it
> > off. # I think in starting tde, but tde denies it. But if I even
> > want a # console bell
On Tue, Jun 4, 2019 at 9:24 AM Gene Heskett wrote:
>
> ===
> # restore sound at every terminal start since starting x shuts it off.
> # I think in starting tde, but tde denies it. But if I even want a
> # console bell for sound:
> /usr/sbin/alsactl restore 2>1 >/dev/null
> # now,
On Tuesday 04 June 2019 03:28:40 am andy pugh wrote:
> On Tue, 4 Jun 2019 at 03:41, Gene Heskett wrote:
> > screen?
> >
> > Not in this case although it cam mimic the screens the coco can do
> > if you want it to.
>
> I am not sure I understand the answer.
Meaning it can export the coco's
On Tue, 4 Jun 2019 at 03:41, Gene Heskett wrote:
> screen?
>
> Not in this case although it cam mimic the screens the coco can do if you
> want it to.
I am not sure I understand the answer.
Serial comms is a pretty fundamental thing. You should see a whole load of
ports in /dev
And screen
I see you used "lspci" and the port was not there.
Try booting the OS that sees the port then go to /dev/serial/by-id
and have a look.Ports there are names for their hardware locations
While booted up on that system try lspci.
On Mon, Jun 3, 2019 at 6:58 PM Gene Heskett wrote:
>
> On
On Monday 03 June 2019 07:34:36 pm Gregg Eshelman via Emc-users wrote:
> A search for
> de9 to db25 rs232 adapter
>
> Turns up many of them for cheap. A computer shop that's been around
> long enough ought to have one or more laying around, might even give
> it to you to avoid throwing it away.
>
On Monday 03 June 2019 05:58:24 pm Chris Albertson wrote:
> Here is a good serial port guide for Linux. Section 16 is
> "troubleshooting".
> THeir first step is to do what I suggested, check BIOS setting before
> booting.
> After that, they suggest scanning PCI bus
>
As in lspci? No serial
On Monday 03 June 2019 03:38:40 pm Andy Pugh wrote:
> > On 3 Jun 2019, at 18:41, Gene Heskett wrote:
> >
> > s there any other way I can make the db9 port on this mobo work?
>
> screen?
Not in this case although it cam mimic the screens the coco can do if you
want it to. Basically its an
A search for
de9 to db25 rs232 adapter
Turns up many of them for cheap. A computer shop that's been around long enough
ought to have one or more laying around, might even give it to you to avoid
throwing it away.
Irritating that companies for whom cables are their specialty are using the
Here is a good serial port guide for Linux. Section 16 is
"troubleshooting".
THeir first step is to do what I suggested, check BIOS setting before
booting.
After that, they suggest scanning PCI bus
This is the best documentation of serial ports I've seen
www.tldp.org/HOWTO/Serial-HOWTO.html
> On 3 Jun 2019, at 18:41, Gene Heskett wrote:
>
> s there any other way I can make the db9 port on this mobo work?
screen?
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Monday 03 June 2019 01:34:49 pm Chris Albertson wrote:
> The best way to test serial ports under Linux (or any other OS) is to
> make a loopback device.This is a fancy name for a short length of
> wire that short the Rx and Tx pins. You should then be able to
> read back every byte
The best way to test serial ports under Linux (or any other OS) is to make
a loopback device.This is a fancy name for a short length of wire that
short the Rx and Tx pins. You should then be able to read back every
byte you send. It loopback fails then you know the promlem is at your end
On Monday 03 June 2019 01:02:23 pm Greg Bernard wrote:
> Have you thouht of using a USB to serial adapter?
> https://www.amazon.com/TRENDnet-Converter-Installation-Universal-TU-S9
>/dp/B0007T27H8
>
Yes and no Greg. They are all db9's and this sniffer is db25. I have the
fdti cables, but not a
Have you thouht of using a USB to serial adapter?
https://www.amazon.com/TRENDnet-Converter-Installation-Universal-TU-S9/dp/B0007T27H8
On Mon, Jun 3, 2019 at 11:43 AM Gene Heskett wrote:
> Greetings all;
>
> One of the things I occasionally do is run a couple programs to talkto a
> trs-80
Greetings all;
One of the things I occasionally do is run a couple programs to talkto a
trs-80 computer running in the basement, which has 3 serial ports on it,
and the one that works with drivewire is the bitbanger, running at about
155 kilobaud. drivewire is written in java and apparently
Hello,
Serial is slow, but it fast enough for on/off spindle, water pump; read
from emergent stop button, limit switch etc.
So can linuxcnc combinate lpt (and other ones) with com port?
--
Trần Ngọc Quân.
--
HPCC
On 10 June 2014 01:48, Trần Ngọc Quân vnwild...@gmail.com wrote:
So can linuxcnc combinate lpt (and other ones) with com port?
You can certainly use the serial port status lines as extra IO for such uses:
http://www.linuxcnc.org/docs/html/man/man9/serport.9.html
--
atp
If you can't fix it,
On 06/09/2014 05:48 PM, Trần Ngọc Quân wrote:
Hello,
Serial is slow, but it fast enough for on/off spindle, water pump; read
from emergent stop button, limit switch etc.
So can linuxcnc combinate lpt (and other ones) with com port?
I would suggest using Modbus. Serial R232 to RS484/422
On 6/9/2014 7:10 PM, Kirk Wallace wrote:
On 06/09/2014 05:48 PM, Trần Ngọc Quân wrote:
Hello,
Serial is slow, but it fast enough for on/off spindle, water pump; read
from emergent stop button, limit switch etc.
So can linuxcnc combinate lpt (and other ones) with com port?
I would suggest
35 matches
Mail list logo