On 12/15/2020 03:43 PM, andy pugh wrote:
The first time I tried it, I got what I expected, then I
tried again and now it gives the wrong behaviour every
time. So at least I have a system to try debugging on.
BTW, using a PC and Axis 2.7.14 (still with the MESA) it exhibits the same
issue.
Whi
To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Spindle + MDI (Was: I wonder...)
>
> On Tue, 15 Dec 2020 at 21:43, andy pugh wrote:
> >
> > I don't think that I have seen this with Touchy
>
> OK, you can't see this in Touchy as the MDI inte
On Tue, 15 Dec 2020 at 21:43, andy pugh wrote:
>
> I don't think that I have seen this with Touchy
OK, you can't see this in Touchy as the MDI interface needs you to
press M3 to get an S to fill out.
But Gmoccapy is the same.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and
On Tue, 15 Dec 2020 at 19:04, John Dammeyer wrote:
> Enter instead G01 X1.0 F4 M3 S1000 and spindle doesn't stop but accelerates
> up to 1000 RPM.
The first time I tried it, I got what I expected, then I tried again
and now it gives the wrong behaviour every time.
So at least I have a system to
looks like although the AXIS Spindle ON should also set the M3 it doesn't?
John
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: December-15-20 8:14 AM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] Spindle + MDI (Was: I wonde
On Fri, 11 Dec 2020 at 23:53, John Dammeyer wrote:
> It’s the little things tha trip me up. Like setting the spindle to 1000 RPM.
> Doing some cutting and > then sending an MDI command like G01 X0.0 S500. And
> the spindle stopped. Seems once
> issued from the MDI it doesn't know that there