On Tue, 10 Aug 2010 00:42:58 -0400, you wrote:
The following G Code does a great Left Hand thread but
I have to lower the AXIS Spindle Override slider before
spindle-at-speed will come on and start threading.
The Spindle gear selected is 230 RPM max, but the
spindle-rpm-cmd goes past that and
On 10 August 2010 05:42, Don Stanley dstanley1...@gmail.com wrote:
The Spindle gear selected is 230 RPM max, but the
spindle-rpm-cmd goes past that and is continually
trying to run the spindle faster and faster.
What is your HAL setup for spindle speed control?
If you are running closed-loop
Thanks Steve Andy;
It was a NEWBE ATTACK.
Everything is brighter at sunrise.
Apparently I had tested a G96 S400 earlier in the day and
never did a G97. The Spindle was going for 400 FPS on a 1 shaft.
EMC remembers, even when I didn't want it to.
Thanks again
Don
PS. Andy I havn't
Hi All;
The following G Code does a great Left Hand thread but
I have to lower the AXIS Spindle Override slider before
spindle-at-speed will come on and start threading.
The Spindle gear selected is 230 RPM max, but the
spindle-rpm-cmd goes past that and is continually
trying to run the spindle
