I not understand if there is this possibility .. in my test I receive only
a list of error (debug level 1) .
If someone have use with succes mb2hal in slave conf ... can suggest my the
right way to do this?
Regards
Giorgio
-
I would guess Linuxcnc always is the master.
> I not understand if there is this possibility .. in my test I receive
> only a list of error (debug level 1) .
> If someone have use with succes mb2hal in slave conf ... can suggest my the
> right way to do this?
>
> Regards
> Giorgio
>
il.com
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] modbus2hal is possible to setting as SLAVE?
>
> I would guess Linuxcnc always is the master.
>
> > I not understand if there is this possibility .. in my test I receive
> > only a list of error (deb
now I try .
>
> If have positive response I post the comp on LcncForum and here.
>
> Tanks A lot.
> Giorgio
>
> > Date: Wed, 27 Apr 2016 22:47:56 +0200
> > From: nicklas.karlsso...@gmail.com
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Em
27 Apr 2016 22:47:56 +0200
>>> From: nicklas.karlsso...@gmail.com
>>> To: emc-users@lists.sourceforge.net
>>> Subject: Re: [Emc-users] modbus2hal is possible to setting as SLAVE?
>>>
>>> I would guess Linuxcnc always is the master.
>>>
>>>> I not unde
very fast in the
answers .
Actually I play with ethercat but I would to have another available bus
> From: linuxcncro...@gmail.com
> To: emc-users@lists.sourceforge.net
> Date: Thu, 28 Apr 2016 10:09:50 -0400
> Subject: Re: [Emc-users] modbus2hal is possible to setting as SLA
; From: nicklas.karlsso...@gmail.com
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] modbus2hal is possible to setting as SLAVE?
>
> If linuxcnc tell servo which path it should follow or if servo ask should not
> matter. It might work, the important part is linuxcnc provid
ther available bus
>
>> From: linuxcncro...@gmail.com
>> To: emc-users@lists.sourceforge.net
>> Date: Thu, 28 Apr 2016 10:09:50 -0400
>> Subject: Re: [Emc-users] modbus2hal is possible to setting as SLAVE?
>>
>> I'm not aware of what the end goal for your M
Giorgio
> From: linuxcncro...@gmail.com
> To: emc-users@lists.sourceforge.net
> Date: Fri, 29 Apr 2016 10:01:51 -0400
> Subject: Re: [Emc-users] modbus2hal is possible to setting as SLAVE?
>
> True, but in practice between a fast Modbus TCP slave and Classicladder
> running as maste
me other electrical device not ethercat Is better to have an other
> bus option isn't right?
>
> Regards
> Giorgio
>
>> From: linuxcncro...@gmail.com
>> To: emc-users@lists.sourceforge.net
>> Date: Fri, 29 Apr 2016 10:01:51 -0400
>> Subject: Re: [Em
10 matches
Mail list logo