On Tuesday 20 October 2020 06:41:53 andy pugh wrote:
> On Tue, 20 Oct 2020 at 10:30, Gene Heskett wrote:
> > I forget, whatever puts a std bob on its p2, and a 7i76D on its p3.
> > dmesg doesn't show the 5i25 bit file in use.
>
> Does dmesg tell you anything? Are you getting the pinout listing?
On Tue, 20 Oct 2020 at 10:30, Gene Heskett wrote:
> I forget, whatever puts a std bob on its p2, and a 7i76D on its p3.
> dmesg doesn't show the 5i25 bit file in use.
Does dmesg tell you anything? Are you getting the pinout listing?
--
atp
"A motorcycle is a bicycle with a pandemonium
On Tuesday 20 October 2020 03:36:34 andy pugh wrote:
> On Tue, 20 Oct 2020 at 04:15, Gene Heskett
wrote:
> > I am currently setup to use a 2nd pwmgen in a 5i25, which should
> > come out on the bob plugged onto p2 at pin 5 dir as dir, and pin 6
> > for the pwm.
>
> Only if your firmware has
On Tue, 20 Oct 2020 at 04:15, Gene Heskett wrote:
> I am currently setup to use a 2nd pwmgen in a 5i25, which should come
> out on the bob plugged onto p2 at pin 5 dir as dir, and pin 6 for the
> pwm.
Only if your firmware has that pwmgen. Which firmware is the 5i25 flashed with?
The dmesg
Greetings all;
I am currently setup to use a 2nd pwmgen in a 5i25, which should come
out on the bob plugged onto p2 at pin 5 dir as dir, and pin 6 for the
pwm.
I am not going to use the dir because these h-bridges need both a fwd and
a reverse drive to cause the top half of the h-bridge to
