1. On the "lightning mouse" Go to /etc/X11/XF86Config and check the pointer
section
If you set the mouse to Glidepoint or to some special setting, change it to
PS/2 protocol on /dev/psaux
Second, back off on the screen settings. I am not sure why there is an
interaction here, but it happens a
This is odd.
I have placed a .htaccess file in a cgi-bin and when I call a perl
script from that directory it does not bring up the password
authentication box it just executes the script.
Any thoughts?
Dunc
-- \\- Duncan Hall - SysAdmin Viator - Sydney AU +61 2 93616137 -\\ --
I just attempted to setup samba with the following results:
(comp.protocols.samba probably would've been a better place to post this
question but our news server is currently down and probably won't be up
for quite a while)
At one point, 'nbtstat -a ' under NT was finding my linux box
but, after
A quick question, does anyone have experience configuring software RAID v0.9 on Linux?
If so, would you please reply to me because I still got some problem to set it up
correctly.
Many thanks.
Ken
___
Get your hongkong.co
Dear all,
Someone posted a solution to samba not remounting drives when they get lost
before, and that was to get the source and install and compile that. So...
I went and downloaded the src file samba-2.0.5a-3mdk.src.rpm and ran
rpm --recompile samba-2.0.5a-3mdk.src.rpm
It put the files in /va
Mindaugas Riauba wrote:
>
> While trying to compile new kernel I'm getting such message. Kernel config
> attached.
> System is fresh Mandrake 6.1 install with updated kernel, kernel-headers,
> kernel-source
> to version 2.2.13-22mdk.
> Computer - SCSI system with IDE CDROM and 2 CPUs.
>
>
I just installed Mandrake 6.1 on my laptop (Compaq Prosignia 150).
Everything installed cleanly, but I can't get the sound to work.
I get an error message when I try the "aumix" program:
# aumix
aumix: error opening /dev/mixer: Success
I get a similar error when I click on the mixer icon:
I'm doing well using the HP1200/1600 filter on a new HP1120C printer.
Haven't tried 11x7, but 8.5x11 works well in color and b/w.
Alain Ayerra wrote:
>
> Im looking for a new inject printer for my computer,but i don know what
> brand/model work best under Linux.
>
> I want to buy a printer tha
use vipw or vi /etc/passwd
- Original Message -
From: metronumic <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, November 07, 1999 2:31 PM
Subject: [expert] [i have no [EMAIL PROTECTED]]$
>
> Hello
>
> I have a little bit of a problem.
> I added 2 users, and i put their n
http://www.picante.com/~gtaylor/pht/printer_list.cgi
Quoting Alain Ayerra <[EMAIL PROTECTED]>:
> Im looking for a new inject printer for my
computer,but i don know what
> brand/model work best under Linux.
>
> I want to buy a printer that is suppoterd with black
and color printing.
>
>
> Bes
Tima Vaisburd wrote:
> Larry Sword <[EMAIL PROTECTED]> wrote:
>
> > > On my machine ( stock Mandrake 6.1 ) kfm could not open tar archive
> > > (or tar.gz) in the form of usual file/directory subtree ( a nice and useful
> > > feature, I think ). Instead, it shows many fake folders, which he could
Twice recently my mandrake 6.1 system locked up
completely, responding to keyboard nor mouse nor telnet, to
the extent that it had to be reset. The message log for the
first of these gives an error for a kernel paging request
followed by sundry details; the second crash was not
logged. Any suggest
Tima Vaisburd wrote:
> Larry Sword <[EMAIL PROTECTED]> wrote:
>
> > > On my machine ( stock Mandrake 6.1 ) kfm could not open tar archive
> > > (or tar.gz) in the form of usual file/directory subtree ( a nice and useful
> > > feature, I think ). Instead, it shows many fake folders, which he could
Im looking for a new inject printer for my computer,but i don know what
brand/model work best under Linux.
I want to buy a printer that is suppoterd with black and color printing.
Best regards:
Alain.
I am attempting to install the latest snapshot of the cooker release and
both the graphical and text based installs are not working, I am
attemting to fix them but I can not figure out how to edit the contents
of the stage2.img file
dose anyone want to let me know how? or poke someone to get the
Tadghe Djin wrote:
>
> On Sat, 06 Nov 1999, you wrote:
> > What are the outputs of
> > ifconfig
> > route
> >
> > on two of the boxes connected via the hub?
> >
> > -sen
>
> ifconfig's output
>
> [root@victory scsi]# ifconfig
> eth0 Link encap:Ethernet HWaddr 00:C0:F0:28:D9:EE
>
After installing Helios, I seem to be unable to compile GTK programs. I
didn't have this problem with Venus, nor with SuSE 6.2, which I ran for
a few days between the two Mandrake versions. I have installed just about
every development file off the CD (I had planned to include the output of
"rpm
Bill&Virginia Hodges wrote:
>
> My printer ceased to function when I upgraded my pentium box from
> Mandrake 6.0 to 6.1.
> It is a postscript printer connected to my only parallel port
> at port 0x378 (IRQ 7).
> Upon issueing "lpr xxx.ps" the printer starts as if it is going to print
>
> but not
On Sun, 07 Nov 1999, you wrote:
It works! Yea!
I'm a bit curious as to why I have to explicitly add a route for each node.
(I'm not complaining mind you! :-) Just curious why pointing it to ".0" (whole
network) doesn't work... anywho, thank you!!
I found a fix for the Adaptec 1542 Errors
Larry Sword <[EMAIL PROTECTED]> wrote:
> > On my machine ( stock Mandrake 6.1 ) kfm could not open tar archive
> > (or tar.gz) in the form of usual file/directory subtree ( a nice and useful
> > feature, I think ). Instead, it shows many fake folders, which he couldn't
> > open then.
> Yes the s
Hello
I have a little bit of a problem.
I added 2 users, and i put their name and all that jazz in,
and yet i cant get their usernames. It wont accept them.
Any ideas?
-Alex
Hi,
I configurated a teles PCI ISDN internal adpter and I'm trying to use
it with kppp.
My problem is that when I try to connect to my provider it's return
BUSY line.
With analog modem I'have to use X3 to don't see NO DIALTONE error, it's
seem the same thing.
What command I have to use ?
th
If your getting to the stage2 point that means your networking is up and running.
What you should check is the path to your redhat i386 directory on the server. The
install is very picky about how it finds that stage2 file. I had to mess with the path
a bit... I think I included a trailing "/" an
Tima Vaisburd wrote:
> Hi!
>
> On my machine ( stock Mandrake 6.1 ) kfm could not open tar archive
> (or tar.gz) in the form of usual file/directory subtree ( a nice and useful
> feature, I think ). Instead, it shows many fake folders, which he couldn't
> open then.
>
> Does anybody experience su
I saw this mentioned on the mailing list archives a while ago, but I
didn't see any solutions.
I am trying to do a fresh install of 6.1 on a laptop that doesn't have
a cdrom drive. I have tried ftp install with a remote server, ftp
install to my own (local) server, hard disk install with the ent
:>The problem is that I don't have mail, new or otherwise. The message is
:>not useful if it is always present.
Well, you will have to speak with pine-developers, I am afraid. Maybe
there is something about it in the pine-documentation, it has never
bothered me becouse I always have some e-mails
Tadghe Djin writes:
> On Sat, 06 Nov 1999, you wrote:
> > What are the outputs of
> > ifconfig
> > route
> >
> > on two of the boxes connected via the hub?
> >
> > -sen
>
>
> ifconfig's output
>
>
> [root@victory scsi]# ifconfig
> eth0 Link encap:Ethernet HWaddr 00:C0:
> "YOU HAVE MAIL" != "YOU HAVE NEW MAIL"
>
> I do not see the problem.
The problem is that I don't have mail, new or otherwise. The message is
not useful if it is always present.
--
Harry Henry Gebel ICQ# 43675297
W
Ramon Gandia wrote:
>
> On Sat, 06 Nov 1999, Stephen P. Molnar, Ph.D. wrote:
> > After an abortive two weeks trying to implement v6.1 I have reverted (with
> > sighs of relief) to v6.0, I'm facing two boot messages at the present time
> > that I don't understand. or know what to do about.
> >
O
:>Any suggestions?
1) re-install the printer (remove old /var/spool/lpd/* dirs).
2) compile the "lp" in kernel, or load the module from /etc/rc.d/rc.local
hope this helps
Denis
---
Denis Havlik ||| http://www.ap.univie.ac.at/use
:> Pine leaves a "pseudo-message" in the mail spool which causes bash to
:>always state "You have mail." when logging on. Apparently this is to
:>support something called marking messages as Answeared when a reply is
:>postponed and to support pop and imap servers. I can suppress Pine's
:>leaving
:>Is there an easy way?
save your /etc directory. Saving some of the "/var/" stuff is good too
(like /var/spool/* for instance), . I do not have
to tell yo to save the /home/*, I suppose.
Re-install. User-data are kept in /etc/ passwd,shadow, group -> take an
editor and add merge "old" nad "ne
Hi!
On my machine ( stock Mandrake 6.1 ) kfm could not open tar archive
(or tar.gz) in the form of usual file/directory subtree ( a nice and useful
feature, I think ). Instead, it shows many fake folders, which he couldn't
open then.
Does anybody experience such behavior?
Tima.
Hi!
I had a problem compiling asmodem-0.6.
asmodem #include's , and my gcc seems to be confused by
'__u32' indentifier which is present in that file.
The name '__u32' is used in the lot of places in /usr/include/linux directory
where the type name is required ( unsigned 32-bit integer ? ),
but
My printer ceased to function when I upgraded my pentium box from
Mandrake 6.0 to 6.1.
It is a postscript printer connected to my only parallel port
at port 0x378 (IRQ 7).
Upon issueing "lpr xxx.ps" the printer starts as if it is going to print
but nothing is printed. It is not queued in the spo
35 matches
Mail list logo
