Here's the situation. I have a laptop running LM7.2 here at the office.
It's one of 3 linux machines here. I have a SCSI Zip drive attached to one
of my NT4 boxes. I would like to be able to mount his drive from my laptop
but can't figure out how. The drive is shared out, but only my login name
ha
Hi,
In my case for compiling kde apps I needed to define the environment
variables KDEDIR and QTDIR. I'm not sure since in this moment I'm
not in a mdk box but I think the first one should be defined as /usr
and the second as /usr/lib/qt2
Cheers
--
Jaime D. Perea Duarte. ([EMAIL PROTECTED],
If you can see it in Gnomba, just right-click on the drive and mount it.
First though, you should setup a mount point in /mnt. I.e. /mnt/zip. After
you have mounted it you should be able to read the contents.
NeoFax
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Hi all..
anyone know what is right permission for default 'user' using sendmail when sending
mail?
i try to using pine
$pine root
and send by pressing ctl+x
error at bottom line is
---
[Mail not sent: .0.0 Can't create transcript file
./xff1KAMc
Hi all,
I have a little problem I really need help with..
When I was using RH6.2 it was really easy to set up ppp to dial on boot..
now that I have mdk7.2 I am havin no luck at all, I can dial in using kppp
and gnoppp and they work fine. but not on boot,,
I tried the ppp0 settings in linuxconf
Hello
Please excuse the following stupid question, but can anyone tell me what
Menudrake is really for ? I assumed it was for adding and editing menu items.
Try as I may ,I cannot get it to change anything. Installed a program the
other day (ripperX), and it would not save any changes
Is there a trick to make printing work from Xemacs/emacs with cups?
When I do ps-print-buffer in Xemacs, the postscript commands print out
with the staircase effect.
HP 932C printer on Mandrake 7.2. The test page is ok and printing a
.dvi file with dvips also works properly.
Thanks,
Steve
hey, i had the same problem, but it was on my desktop,
i solved it when i increased my swap file 2X my existing ram.
dunno why??? too many disk swaps perhaps... might work with you too.
---lem
you can install "courier-imap" it has secure counterparts of IMAP and POP
SIMAP and SPOP3
---lem
frankie,
On Tuesday 20 February 2001 4:04 am, Franki wrote:
> Have you ever used Portsentry? how do you restart that? (does it start
> from boot? if not, do I have to add somethign to rc.d to get it up and
> running? and also, if I use a port scanner to test it,, it will ban my IP
> won't it?
Thanks, I'll do that for all 10 of my Mandrake CDs. 7.2(4), 7.2-update(1),
6.5(3?), 6.x Utilities(2).
And I'll check that RPM link(s).
some things that might help:
put in a cd that has rpms. I'm assuming that the RPMS are in a directory
named RPMS. substitute the correct directory in the
Ok, this is my first time with scsi and linux. I have 7.2 and now 8.0
installed on my
machine which dual boots with 98. Mandrake 8.0 beta sets up the cdrw (Sony)
after installation. The cdrw is found perfectly. Installation was great for
8.0 (mostly)
but cdrecord --scanbus doesn't show it. My driv
On Sunday 18 February 2001 10:13 pm, you wrote:
> 1) - In theory, at least, the gui login panel should allow one to choose
> the window manager, and it does provide tabs for gnome,
> enlightenment,etc., etc. However, when I choose one of these, I always
> get KDE, no matter which I have chosen.
If you are in N.E. and want some cheap Linux books, two places to look.
Building 19 (20 stores) has computer books for 50c (yes, the 400+ page Linux
ones, some w/CD)
Ocean State Job Lot (many stores), $6.99 (sometimes $4.99) and many of them
include a CD, like the Wordperfect-8 for Linux boo
does any one know where i could download the isos for mandrake 8 beta?
Do you know where can I find the KDE2.1Beta2 kde-i18n-* rpms for Mandrake 7.2
?
Thank you.
--
Pupeno: [EMAIL PROTECTED] www.pupeno.com.ar
On Tuesday 20 February 2001 11:25, you wrote:
> Do you know where can I find the KDE2.1Beta2 kde-i18n-* rpms for Mandrake
> 7.2 ?
> Thank you.
Do yourself a major favor and wait 3 or 4 days. Then they will be available
for 2.1 through Mandrake Update. KDE 2.1 is in it's final stages of
pre-rel
"
Naah! Just pulling your leg:o)
Horrible things can happen during an install, just try again -I
found out that the quality of bootable installation cd"s and their
content tend to differ too.
Actually if you want to complain do so! and if you've questions be
more specific.
I've posted each pro
On Tuesday 20 February 2001 10:02, you wrote:
> Ok, this is my first time with scsi and linux. I have 7.2 and now 8.0
> installed on my
> machine which dual boots with 98. Mandrake 8.0 beta sets up the cdrw (Sony)
> after installation. The cdrw is found perfectly. Installation was great for
> 8.0
I missed that in my posting. I do have append="hdd=ide-scsi"
This is what makes it odd for me to understand why it doesn't show up!
Brian
-Original Message-
From: Jason Straight [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 20, 2001 12:03 PM
To: [EMAIL PROTECTED]
Subject: Re: [exper
On Tuesday 20 February 2001 12:25, you wrote:
> I missed that in my posting. I do have append="hdd=ide-scsi"
> This is what makes it odd for me to understand why it doesn't show up!
>
> Brian
How about in /etc/modules
ide-scsi
--
Jason Straight
To those who replied to my question about changing the mount
point of CD-ROMs, thank you very much for taking the time. I
hadn't thought of creating a softlink. It worked like a charm. Now I
am sharing all 3 CD-ROM drives as one drive letter for the Windows
machines on the network.
Bruce End
There is a link in this lists archives, but here it is:
ftp://ftp.sunet.se/pub/Linux/distributions/mandrake-iso/
-Original Message-
From: Steve Young [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 20, 2001 11:00 AM
To: [EMAIL PROTECTED]
Subject: [expert] mandrake 8 iso
does any one
> Do yourself a major favor and wait 3 or 4 days. Then they will be available
> for 2.1 through Mandrake Update. KDE 2.1 is in it's final stages of
> pre-release work.
This is sure good news Chris. Thanks for this announcement.
Cheers --- Larry
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Steve Young
> Sent: Tuesday, February 20, 2001 11:00 AM
> To: [EMAIL PROTECTED]
> Subject: [expert] mandrake 8 iso
>
>
> does any one know where i could download the isos for mandrake 8 beta?
>
It says: No such file or directory. Maybe it has been moved?
El Martes 20 Febrero 2001 11:16, Klar Brian D Contr MSG SICN escribió:
> There is a link in this lists archives, but here it is:
> ftp://ftp.sunet.se/pub/Linux/distributions/mandrake-iso/
>
> -Original Message-
> From: Steve You
On Tue, 20 Feb 2001 18:46:41 +0800
"Franki" <[EMAIL PROTECTED]> wrote:p to dial on boot..
>
> now that I have mdk7.2 I am havin no luck at all, I can dial in using kppp
> and gnoppp and they work fine. but not on boot,
Try editing /etc/sysconfig/ifcfg-ppp0
Excerpts from mine: Not all of it but
> In my case for compiling kde apps I needed to define the environment
> variables KDEDIR and QTDIR. I'm not sure since in this moment I'm
> not in a mdk box but I think the first one should be defined as /usr
> and the second as /usr/lib/qt2
These are both set... I was having exactly the same pr
You need a space between the double quote and the hdd
append=" hdd=ide-scsi"
Mike
--
Mike MacCanaSupport Consultant
C Y B E R S O U R C E
Level 9, 140 Queen St Melbourne 3000
Ph : +61 3 9642 5997 Fax: +61 3 9642 5998
On Tue, 20
I'm not sure whether this a is a dumb question but is it possible to
reprocess mail maessages by procmail after they have been received by
Netscape.
I have a huge amount of duplication in my Mandrake expert and newbie
lists and I'd like to get rid of it. I know that procmail can do this
before t
On 20 Feb 2001 15:17:32 -0300, Pupeno wrote:
> I'm trying to update Mandrake with the Mandrake update utility and I have the
> following problem.
> A lot of my installed rpms depends on installed libstdc++ (exactly that
> version) and a lot of the new packages depends on the new libstdc++.
> So,
i have mdk 8.0 and as expected its still very buggy, does anyone know
about the refresh problem? i am having it
Klar Brian D Contr MSG SICN wrote:
> There is a link in this lists archives, but here it is:
> ftp://ftp.sunet.se/pub/Linux/distributions/mandrake-iso/
>
> -Original Message-
>
I would like to be able to use Webcal from within Konqueror but so far
getting javascript to work has eluded me. I have enabled java and
javascript in Settings -> Configure -> Browser -> Java/Javascript but it
does not work. What else do I need to do to get Javascript working?
--
--Stephen Car
Klar Brian D Contr MSG SICN wrote:
>
> I missed that in my posting. I do have append="hdd=ide-scsi"
> This is what makes it odd for me to understand why it doesn't show up!
You must load the necessary kernel modules:
/sbin/modprobe ide-scsi
/sbin/modprobe sg # also reports on ATA
Has anybody else had issues with ipop3d? Sending the command "LIST 1" to
ipop3d on my installation is causing it to hang. Here's a sample session:
[root@server /]# ipop3d
+OK POP3 server.wavicle.org v7.64 server ready
user joe
+OK User name accepted, password please
pass
+OK Mailbox open, 1 m
I have Mandrake 7.2 installed and have an HP 7200 cdrw everything works
perfectly and I understand that in order for the cdrw to work correctly linux
has to emulate the cdrw as a scsi device, but the problem is when ever I
use an app like package managment I see dual entrys same applies for
readi
I was doing a print job the other day and when the
files were finished printing they were not deleted
from the que. Where is this directory I need to delete
these files?
Thanks
Gary
__
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at gr
There have been previous postings to this list regarding menudrake problems.
Menudrake IS to make changes to your menu. I can only speak for KDE, which is
what I run, but I have found that after making changes with MenuDrake, I need
to log out and log back in again for the changes to take plac
Hello Scott,
Monday, February 19, 2001, 5:31:46 PM, you wrote:
SF> I have Mandrake 7.2 installed and have an HP 7200 cdrw everything works
SF> perfectly and I understand that in order for the cdrw to work correctly linux
SF> has to emulate the cdrw as a scsi device, but the problem is when ever
Hi all,
I`ve been getting these messages and wanted to know what they mean and
what I can do to fix them. The ppp0 I`d just like to suppress because I
use a dialup modem. The error messages appear when I open up the programs
from the bash shell.
Kedit- Assert: "chttp://www.gnupg.org
owGbwMvMwCR4q
Franki wrote:
> Hi all,
>
> I have a little problem I really need help with..
>
> When I was using RH6.2 it was really easy to set up ppp to
> dial on boot..
>
> now that I have mdk7.2 I am havin no luck at all, I can
> dial in using kppp and gnoppp and they work fine. but not
> on boot,,
>
> I tr
Hi all,
In the bash shell it says [you@localhost you]$ how do you change it to
something else ? Like just your login or [you@yourisp you] ? I know this
can be done, if you goto ethemes or windowmaker themes people have this
customised. So there must be a way.
thank you, chronos
-BEGIN PGP SI
Is there some command line equivalent for MandrakeUpdate?
It would be very useful for a remote system I take care of,
particularly for security updates.
- Jerry
Has anyone successfully installed the NVidea drivers for Mandrake 7.2? For some
reason it will only run on kernel 2.2.15 and the X server has crashed once.
It works beautifully though - when there are not library location or naming problems.
Yeah it is... I can't get my Video card...a cheapo 6326 with no DVD support
to run decentlky, it won't find the full 8 meg... only finds 4... etc etc,
and my Realtek 8139 NIC won't load either... Hard Drake finds it... but the
OS doesn't seem to see it... sigh...
I pulled the files off the a site
Hi people,
Does anyone know when the 2.4 kernel based Linux Mandrake distribution will be coming
out?
I have heard through the grapevine that it should be March is all goes well - any
further ideas anyone?
_
Want a new web-based emai
All,
I recently install Mandrake 7.2 and am running into the most vexing of problems:
To Date, I cannot locate a single GRAPHICAL MUA that inter operates with an OpenBSD
install of Courier-IMAP. Here's the run down of issues:
Netscape 4 and 6: full inter operation for a few minutes(or two refr
I have this same problem,, UI have a perl cart that links to sendmail for
mailing purposes,, and it gives the same error message as above, except that
the perl script prints the message to the page,, which doesnt' look good,
for that matter the email isn't working for the script either... which lo
Hi,
Has anyone configured the xinetd service to run proftpd. The documentation
states the use of inetd but no xinetd. If anyone has configured it please
let me know how.
Cheers
Sridhar
[EMAIL PROTECTED] wrote:
>
> I was doing a print job the other day and when the
> files were finished printing they were not deleted
> from the que. Where is this directory I need to delete
> these files?
>
> Thanks
> Gary
If you are using Cups, the que is in /var/spool/Cups.
--
.--.
All,
As an update to this, there is an option to enable bug workarounds
(thanks to an offline message) for courier IMAP that seems to have solved
my problems except WRT xfmail. Does anyone know of a PGP aware MUA that
handles IMAP as well?
Thanks, in advance, for your help!!!
P.S. At least I ca
51 matches
Mail list logo