Hi,
I just installed xfree86 3.3.5 via rpms. I used xf86config to
configure. Everything seemed to go fine. But then, when I did startx,
I got the error:
/usr/X11R6/bin/Xwrapper: can't resolve symbol '__xstat'
_X11TranSocketUNIXConnect: Can't connect: errno: = 111
giving up.
xinit:
Felipe Almeida wrote:
Hi!
I updated my old kernel (2.2.5) to a new kernel (2.2.12). But I lost my
sound modules. As a matter of fact, in the make xconfig oe make
menuconfig it didn´t has the option to my soundcard. Just a few were
available. Then I copied the modules I needed from the
Sylvain GIL wrote:
Sorry, my reply was in french, i must be tired :) Here is the
translation :
Hi,
Default configuration of nfs server is to do "root squashing". It means
that the uid of root is squashed to nobody when root try to acces to a
nfs volume. If "nobody" is not allowed to
Nichols, Jason wrote:
I've got an Intel Etherexpress Pro (or compatible) ISA card. During setup
linux tried to autodetect the card and it froze. How can I setup the
network card after the original setup has already been completed? I was
looking at insmod...but that seemed to have hung my
Mauro Tortonesi wrote:
Ehm, I've lost the e-mail about the initscripts update. Where can I find
the updated RPMS? Thank you.
--
Aequam memento rebus in arduis servare mentem...
Mauro Tortonesi [EMAIL PROTECTED]
http://ing49.unife.it/keyser
YH wrote:
18 gb ibm dghs18v u2w scsi
The 18 gb hard drive is the only hard drive on this
system. I've set the scsi id of the drive to 0, and
all of the scsi bios parameters look ok. This is the
only scsi device in the system, so I've set the
active termination jumper. The drive
Hi,
I'm trying to install Mandrake 5.3 on a new machine:
dual pii 350
512 mb ram
asus p2b-ds
18 gb ibm dghs18v u2w scsi
The 18 gb hard drive is the only hard drive on this
system. I've set the scsi id of the drive to 0, and
all of the scsi bios parameters look ok. This is the
only scsi
