David,
Thank you...
Found out that the driver for my cards is not yet part of std dist. of
Mandrake. I am using 3c905B cards. Found the driver but still can not get
ifconfig to recognize the device?
New attachments...
David Mihm wrote:
> On Sat, 26 Aug 2000, Jeff Hoffman wrote:
>
> > I am h
Submitted 27-Aug-00 by Steve Howes:
> This IS [EMAIL PROTECTED]
I believe the point was that the original message was sent to BOTH addresses
for the list, and posting to both doubles the bandwidth cost and annoys list
participants. (I may have a filter to destroy duplicate messages, but I
still
The 3c509x drivers will support the 3c905B NICs. Try these. That's what I've
done.
--Greg
> David,
>
> Thanks for the response... One step closer two steps bacl..
>
> Linux Mandrake has not identified the cards correctly they really are
> 3C905B-TX.
>
> So now what?
>
> David Mihm wrote:
>
> >
David,
Thanks for the response... One step closer two steps bacl..
Linux Mandrake has not identified the cards correctly they really are
3C905B-TX.
So now what?
David Mihm wrote:
> On Sat, 26 Aug 2000, Jeff Hoffman wrote:
>
> > I am having trouble connecting with DHCPCD with Mandrake 7.1. D
Jeff Hoffman wrote:
>
> Help,
>
> I am having trouble connecting with DHCPCD with Mandrake 7.1. Dmesg
> gives me a warning about both ethernet cards at IRQ 0. My PNP OS is set
> to NO. lspci see the cards. and eth1 says it comes up fine. However
> ifconfig only shows the lo device. Any idea
On Sat, 26 Aug 2000, David Mihm wrote:
> On Sat, 26 Aug 2000, Jeff Hoffman wrote:
>
> > I am having trouble connecting with DHCPCD with Mandrake 7.1. Dmesg
> > gives me a warning about both ethernet cards at IRQ 0. My PNP OS is set
> > to NO. lspci see the cards. and eth1 says it comes up fin
On Sat, 26 Aug 2000, Jeff Hoffman wrote:
> I am having trouble connecting with DHCPCD with Mandrake 7.1. Dmesg
> gives me a warning about both ethernet cards at IRQ 0. My PNP OS is set
> to NO. lspci see the cards. and eth1 says it comes up fine. However
> ifconfig only shows the lo device.
Jason Pierce wrote:
>
> R>ifconfig only shows the lo device. Any ideas?
>
> Yea, I got 2 for you. 1) either send it to [EMAIL PROTECTED] or
>[EMAIL PROTECTED] They both get to the same place.
This IS [EMAIL PROTECTED]
--
Steve - Cheltenham, UK
-
In love and light we are
In darknes
R>ifconfig only shows the lo device. Any ideas?
Yea, I got 2 for you. 1) either send it to [EMAIL PROTECTED] or
[EMAIL PROTECTED] They both get to the same place. 2) NEVER send such a large
atachement to a public list. Upload it to the web somewhere and give a link. 32K is
a little large
Help,
I am having trouble connecting with DHCPCD with Mandrake 7.1. Dmesg
gives me a warning about both ethernet cards at IRQ 0. My PNP OS is set
to NO. lspci see the cards. and eth1 says it comes up fine. However
ifconfig only shows the lo device. Any ideas?
Thank you in advance...
Pnpdum
10 matches
Mail list logo