Re: [expert] Re: 3c905B

2000-11-22 Thread stephen
On Wed, Nov 22, 2000 at 09:39:20AM +0100, mike veltman wrote: On Sun, 19 Nov 2000, you wrote: Tom, The eth0 card is SMC-ultra hardware assigned IRQ 3 at io 280. So I am not nuts Mandrake has a problem with 3c905b cards! Funny because I have two of them in my system and never had

Re: [expert] Re: 3c905B

2000-11-22 Thread Michael R. Batchelor
The eth0 card is SMC-ultra hardware assigned IRQ 3 at io 280. So I am not nuts Mandrake has a problem with 3c905b cards! 3C905B what? There are a number of these, and I don't really know the difference.The most recent ones I've bought personally are 3C905B/TX(something) and they work

Re: [expert] Re: 3c905B

2000-11-21 Thread mike veltman
On Sun, 19 Nov 2000, you wrote: Tom, The eth0 card is SMC-ultra hardware assigned IRQ 3 at io 280. So I am not nuts Mandrake has a problem with 3c905b cards! Funny because I have two of them in my system and never had a problem. Mike --

Re: [expert] Re: 3c905B

2000-11-19 Thread Ken Thompson
Hello all, for what it's worth I am using a variety of 3com 3c905 (ISA as well as PCI) cards with great success under LM 7.0, 7.1 and 7.2. I did have to set the cards (some at least) to plug n play = off and also set them to the IRQ I wanted to use. I used the dos utility from 3com's web site

[expert] Re: 3c905B

2000-11-18 Thread Jeff Hoffman
Tom, The eth0 card is SMC-ultra hardware assigned IRQ 3 at io 280. So I am not nuts Mandrake has a problem with 3c905b cards! Tom Berkley wrote: Well, so far I cannot find an IRQ assigned to either eth0 or eth1. That is suspect and something to query the expert list about for starters. If

[expert] Re: 3c905B

2000-11-18 Thread Jeff Hoffman
Tom, I did that card still is not seen. Also, change the /etc/modules.conf to both 3c59x and 3c90x same result. But I may have a clue for everyone... Starting scanning the Turbo linux dos and they had this pci config stuff. So I found Mandrakes stuff and made a little shell(pcistuff). If

RE: [expert] Re: 3c905B

2000-11-18 Thread Brent Timmer
PROTECTED]]On Behalf Of Jeff Hoffman Sent: Saturday, November 18, 2000 8:14 PM To: Tom Berkley; [EMAIL PROTECTED] Subject: [expert] Re: 3c905B Tom, I did that card still is not seen. Also, change the /etc/modules.conf to both 3c59x and 3c90x same result. But I may have a clue for everyone... Starting

Re: [expert] Re: 3c905B

2000-11-18 Thread Tom Berkley
miraculously it works fine. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jeff Hoffman Sent: Saturday, November 18, 2000 8:14 PM To: Tom Berkley; [EMAIL PROTECTED] Subject: [expert] Re: 3c905B Tom, I did that card still is not seen. Also