"Zaleski, Matthew (M.E.)" wrote:
DISCLAIMERI own one of these Linksys Adapters and it works fine, although
I have a static IP/DISCLAIMER
I think the point that the first poster was making is that the driver doco
explicitly states that there is an issue. So his point to avoid the tulip
in the past used 3c509b's with my linksys as well as a smc card.
neither combo resulted in ANY problems.
just some food for though :)
Ron
- Original Message -
From: "Larry Sword" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, April 15, 2000 11:06 AM
Subject: Re: [expert] Tulip N
as a module.
Sridhar
- Original Message -
From: "Jayson S Baird" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, April 07, 2000 12:33 PM
Subject: [expert] Tulip NIC problem
When using Mandrake 7.0 after install, it fails to access the
network. ifconfig reads that m
John,
Did u follow the instructions at the end of the tulip.c file to compile the
file.
Sridhar
- Original Message -
From: "John Helmuth" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Thursday, April 13, 2000 10:59 PM
Subject: Re: [expert] Tulip N
I compiled on 2.2.13-7.
- Original Message -
From: "John Helmuth" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Thursday, April 13, 2000 10:59 PM
Subject: Re: [expert] Tulip NIC problem
What version of the kernel were you running? When I try
ar
- Original Message -
From: "Jayson S Baird" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, April 07, 2000 12:33 PM
Subject: [expert] Tulip NIC problem
When using Mandrake 7.0 after install, it fails to access the
network. ifconfig reads that my mask
DISCLAIMERI own one of these Linksys Adapters and it works fine, although
I have a static IP/DISCLAIMER
I think the point that the first poster was making is that the driver doco
explicitly states that there is an issue. So his point to avoid the tulip
(10/100 Linksys) board is valid. Hardware
driver(tulip.c) from the
diskette to make my card work. I configured as a module.
Sridhar
- Original Message -
From: "Jayson S Baird" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, April 07, 2000 12:33 PM
Subject: [expert] Tulip NIC problem
When using Mandrake 7.0 aft
.
|
| Sridhar
|
| - Original Message -
| From: "Jayson S Baird" [EMAIL PROTECTED]
| To: [EMAIL PROTECTED]
| Sent: Friday, April 07, 2000 12:33 PM
| Subject: [expert] Tulip NIC problem
|
|
| When using Mandrake 7.0 after install, it fails to access the
| network. ifconfig reads th
When using Mandrake 7.0 after install, it fails to access the
network. ifconfig reads that my mask, IP and broadcast addresses are
correct and my default route is set correctly through route. The light on
my hub fails to light up though. My card works in RedHat 6-6.2 and just
for some reason
Jayson S Baird wrote:
When using Mandrake 7.0 after install, it fails to access the
network. ifconfig reads that my mask, IP and broadcast addresses are
correct and my default route is set correctly through route. The light on
my hub fails to light up though. My card works in RedHat 6-6.2
nt: Friday, April 07, 2000 12:33 PM
Subject: [expert] Tulip NIC problem
When using Mandrake 7.0 after install, it fails to access the
network. ifconfig reads that my mask, IP and broadcast addresses are
correct and my default route is set correctly through route. The light on
my hub fails to light
Hi Jay:
I posted this very same question about 3 weeks ago (no answer at all) and, as
well, to Linuxcare a week ago as an installation incident requiring support.
No help so far.
Yesterday I installed SuSE 6.2 with the same results, posted a query and got
good answers back in about 3 hours.
13 matches
Mail list logo