Has anyone on the list had problems using the APS film adaptor for a
CanoScan FS2710 (or similar scanners)?
Normally I scan 35mm negatives for myself with no problems whatsoever,
but while scanning an APS film for a friend I noticed that horizontal
scratches were appearing on the neg
- Original Message -
From: Alan Rew [EMAIL PROTECTED]
To: filmscanners mailing list [EMAIL PROTECTED]
Sent: Saturday, August 18, 2001 12:07 PM
Subject: filmscanners: film scratched by APS adaptor for CanoScan FS2710?
Has anyone on the list had problems using the APS film adaptor for a
CanoScan
Alan Rew [EMAIL PROTECTED] wrote:
Has anyone on the list had problems using the APS film adaptor for a
CanoScan FS2710 (or similar scanners)?
FWIW I've scanned about a dozen APS films with the APS adaptor for the
Nikon LS30 and I don't recall seeing any scratches.
Rob
Make sure you have the correct ASPI driver installed for your SCSI
controller. This has happened to one gentleman on this list I think.
Once he had the ASPI driver installed he scanner works. If you have
Adaptec controller you may down load it free from Adaptec.
Quoton
SD M wrote:
I had ME
I had ME and 2000 on a dual boot and I was able to get my scanner to work in
2000 with much screwing around.
I have migrated to just 2000 and now I am unable for the life of me to get
it to work. I have the correct SCSI drivers and the newest software from the
Canon Site and followed
Richard wrote:
I just downloaded Vuescan 6.4.8 and cannot understand why I am getting what
looks like a raw scan even though I have all the setting correct for
negative film
My scanner is a Canoscan FS2710 and I am Mac based running OS9
Anyone else having problems?
Yes, problems here also
only to find the
problem still exists.
My scanner is a Canoscan FS2710 and I am Mac based running OS9
Anyone else having problems?
--
Regards
Richard
//
| @ @ --- [EMAIL PROTECTED]
C _) )
--- '
__ /
seemed
to work ok.
- Original Message -
From: Richard [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, January 12, 2001 4:28 PM
Subject: filmscanners: Vuescan 6.4.8 problems with Canoscan FS2710 - Mac
I just downloaded Vuescan 6.4.8 and cannot understand why I am getting
what
looks
I recently bought CanoScan2710 with Canocraft FS 3.6.1. software. When
starting Twain under Photoshop (or separately) Canocraft displays default
scan resolution 3080 dpi (not 2720) with output reolution 340 dpi.
What is interesting, is that when I let scanner to scan with these
settings, scanned
Ed wrote:
Does the Canoscan FS2710 have ICE??
No.
If so, was it Nikon technology?
No, it was licensed to Nikon by the company that wrote it.
Is it the same in every scanner? Meaning if a scanner has
ICE, is it universal in what it does?
If it *is* ICE(tm), yes. But various scanners
Does the Canoscan FS2710 have ICE?? If so, was it Nikon technology? Is it
the same in every scanner? Meaning if a scanner has ICE, is it universal in
what it does? (apologies for being late I was on vacation!)
Ed
In a message dated 9/18/2000 3:35:27 PM EST, [EMAIL PROTECTED] writes:
Does the Canoscan FS2710 have ICE?
No, it doesn't. ICE is another way of saying "has an infrared
channel and uses the ICE algorithm to remove dust using
this infrared channel". The FS2710 doesn't have an infrar
12 matches
Mail list logo
