Hi!
> My replacement 8000 was humming right along and I thought I was home free
> but I scanned a slide with lots of deep blue/purple sky and sure enough,
> banding galore. I have a tag to send it back to Nikon but I'm a bit
> skeptical that it will make much difference at this point. If my wif
I can and will!
Lawrence
>
> Could You publish any image on your site with visible banding? I'm very
> curious how it looks like.
>
> --
> Marcin M. Nagraba
> e-mail: [EMAIL PROTECTED]
>
>
>
> --
>
> Znudzilo Ci sie logo w komorce?
> Wgraj nowe [ http://komorki.onet.pl/dodatki.html ]
>
On Wed, 18 Jul 2001 08:53:03 -0400 Lawrence Smith ([EMAIL PROTECTED])
wrote:
> My replacement 8000 was humming right along and I thought I was home free
> but I scanned a slide with lots of deep blue/purple sky and sure enough,
> banding galore.
Do you think this is just showing banding which
Tony,
I think it is happening everywhere but is most obvious in the blue regions.
Lawrence
>
> Do you think this is just showing banding which is happening
> generally but
> hard to see, or is it just in this area?
>
> Regards
>
> Tony Sleep
> http://www.halftone.co.uk - Online portfolio
Lawrence Smith wrote:
>
> My replacement 8000 was humming right along and I thought I was home free
> but I scanned a slide with lots of deep blue/purple sky and sure enough,
> banding galore. I have a tag to send it back to Nikon but I'm a bit
> skeptical that it will make much difference at
I had a number of discussions with HP technical staff regarding the
banding problems in the HP film scanners, which also manifested mainly
in dark areas on slides and we batted this around a fair bit.
Banding seems to have an odd tendency to vary in making its appearance
in devices using stepper
Re the "banding problem"
My first reaction was that the scan is being done "off" a native
resolution 4000 dpi, 2000 dpi, 1333.333 dpi, 1000dpi etc and that software
interpolation was/is being done.
After a few of the other comments about possible mechanical
problems I re
On Thu, 19 Jul 2001, Stephen Kogge wrote:
> So is it possible that your scanner is out running your system,
> the scanner stops and has to back up. It could also be a similar
> problem that the data rate from the CCD head is higher than what the
> Scanner interface can handle and the micr
Stephen Kogge wrote:
>
> Re the "banding problem"
>
> My first reaction was that the scan is being done "off" a native
> resolution 4000 dpi, 2000 dpi, 1333.333 dpi, 1000dpi etc and that software
> interpolation was/is being done.
>
> After a few of the other comments ab
Nikon tech support advised me to send the unit in for service this morning.
They also said that they believed that service has been able 'fix' the
banding issue. They could not tell me however what they believed the issue
really was. They also said that they have only received a handful of calls
This was mentioned to me in passing by the one of the second level guys as a
possible source of the problem.
Lawrence
> Stepper motors are known to resonate
> a certain step-rates, for example.
>
Thanks Art :-) LOL... A like minded spirit! Actually, she keeps asking me
to teach her how to scan and do some photoshoping. She has quite a good eye
but does not know an f stop from a bus stop! Gotta love those slr point and
shoots like her n70. She just puts it in P mode and rips away! I
Title: RE: filmscanners: My replacement 8000 is banding like the first one :-(
This is a possibility. As I mentioned, when I had the LS8000, it did not always band. Sometimes it would and sometimes it wouldn't. Nikon tech support did mention moving the scanner to a different locati
On Thu, 19 Jul 2001, Lawrence Smith wrote:
> Nikon tech support advised me to send the unit in for service this morning.
> They also said that they believed that service has been able 'fix' the
> banding issue. They could not tell me however what they believed the issue
> really was. They als
> > Does the scanner seem to stop and start or is it a smooth scan?
>
> This is completely out of left field, but could it be a power supply
> (in the scanner) issue? Someone else commented on how this only seems to
> show up with scanners using stepper motors... Could the stepper m
> Chris claims that Nikon service has not recived a
> unit for service, yet, for the banding problem.
> That *may* possibly be true, if Lawrence's 1st 8000
> went back to the retailer directly.
>
These guys need to get their story straight. I believe it was Chris I was
speaking with this mornin
ly-To: [EMAIL PROTECTED]
>To: <[EMAIL PROTECTED]>
>Subject: RE: filmscanners: My replacement 8000 is banding like the first
>one :-(
>Date: Thu, 19 Jul 2001 15:49:02 -0400
>
> > Chris claims that Nikon service has not recived a
> > unit for service, yet, for the ba
> This is completely out of left field, but could it be a power supply
> (in the scanner) issue? Someone else commented on how this only seems to
> show up with scanners using stepper motors... Could the stepper motors
> cause spikes in the PSU that could interfere with the imaging side of
>
Title: RE: filmscanners: My replacement 8000 is banding like the first one :-(
I no longer have my LS8000 as I've mentioned. However, Camera World did want my Nikon case # so they could return it. If anyone wants the case #, I'll supply it.
Paul Wilson
> -Original Messag
> Stepper motors are known to resonate
> a certain step-rates, for example.
Sorry, and I don't mean to be glib...but perhaps having an 85 pound scanner
may be an asset ;-)
EMAIL PROTECTED]]On Behalf Of Austin Franklin
> Sent: 19 July 2001 23:08
> To: [EMAIL PROTECTED]
> Subject: RE: filmscanners: My replacement 8000 is banding like the first
> one :-(
>
>
> > Stepper motors are known to resonate
> > a certain step-rates, for example.
>
MAIL PROTECTED]]On Behalf Of Jawed Ashraf
> Sent: Thursday, July 19, 2001 8:25 PM
> To: [EMAIL PROTECTED]
> Subject: RE: filmscanners: My replacement 8000 is banding like the first
> one :-(
>
>
> I tried sitting on my scanner (I'm at least 80Kg) but it made no
> di
At 01:43 20/07/01, rafe wrote:
>Stepper motors are known to resonate
>a certain step-rates, for example.
Yes...
Given that Nikon were reported to be having development problems with the
higher res stepper motor for the new generation of product including the
8000, and given that jaggies is pro
> Also since the 8000 presumably has a heavier scanning head than
> the smaller
> scanners (more ccd etc), the mechanical constraints are more
> serious and it
> may therefore be the most sensitive to such things and which may not show
> up as problems on their 35mm scanners.
This scanner moves
>= Original Message From "Austin Franklin" <[EMAIL PROTECTED]> =
>> Also since the 8000 presumably has a heavier scanning head than
>> the smaller
>> scanners (more ccd etc), the mechanical constraints are more
>> serious and it
>> may therefore be the most sensitive to such things and whi
I don't know how heavy the ED 8000 is, but these days most electronics
have minimal heft to them and aren't very solid.
I have found that as a result, using a solid platform for devices like
film scanners might help them to be less likely to create sympathetic
vibration in the shelf or table they
At 12:03 PM 7/20/01 +0100, Jawed wrote:
>Dare I say it, but I suspect a scanner moving the film is "less accurate"
than
>a scanner that moves the scan "head".
I disagree, and I'm sure Austin will chime in here too .
All film scanners I've worked with move the film -- except
for flatbeds wi
At 12:52 AM 7/20/01 -0700, Art wrote:
>I don't know how heavy the ED 8000 is, but these days most electronics
>have minimal heft to them and aren't very solid.
Hi Art. Your "sources" might have told you that
it's 19.8 lbs, which information is freely available
on the internet, at
http://ww
> >> Also since the 8000 presumably has a heavier scanning head than
> >> the smaller
> >> scanners (more ccd etc), the mechanical constraints are more
> >> serious and it
> >> may therefore be the most sensitive to such things and which
> may not show
> >> up as problems on their 35mm scanners.
> I don't know how heavy the ED 8000 is, but these days most electronics
> have minimal heft to them and aren't very solid.
Somewhat true, but power supplies can still be quite heavy. It is 19.8 lbs.
Not really light, but certainly not all that heavy.
Your suggestion of putting it on a solid s
gt;Reply-To: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Subject: RE: filmscanners: My replacement 8000 is banding like the first
>one :-(
>Date: Fri, 20 Jul 2001 09:10:57 -0400
>
>At 12:03 PM 7/20/01 +0100, Jawed wrote:
>
>
> >Dare I say it, but I suspect a scanner moving
On Fri, 20 Jul 2001, Lynn Allen wrote:
> Not that I really want to comment on this at all, but I've found that if I
> don't, maybe nobody will (too often, and not often enough). :-)
>
> Given: That the stepper mechanism is accurate, and not just a piece of
> trash...
> Then: It would not mat
Rafe wrote:
>...our entire job in this listserv sometimes seems to be second-guessing
>the manufacturers and telling them what they did wrong.
Seems to me they give us ample opportunity! ;-)
>My personal guess is that the better
>way is the one that moves the smaller
>mass -- all else being e
Actually, Nikon LS2000 and LS30 and I suspect all the newer 35mm
models, at least, move the scanning "unit" (CCD, lens and lighting
source and any mirrors), and not the film.
Yes, they move the film into frame position, but then the fine movement
is done by moving the scanner "head".
This does
Lynn Allen wrote:
>
> Given: That the stepper mechanism is accurate, and not just a piece of
> trash...
> Then: It would not matter whether the copy is moved or the scanning head is
> moved.
>
I don't fully agree. One can design a very precise metal screw or other
method for moving the CCD
> Actually, Nikon LS2000 and LS30 and I suspect all the newer 35mm
> models, at least, move the scanning "unit" (CCD, lens and lighting
> source and any mirrors), and not the film.
>
> This does probably allow for more accurate scans in multi-pass
> situations.
Why would that be?
> >
> > Given: That the stepper mechanism is accurate, and not just a piece of
> > trash...
> > Then: It would not matter whether the copy is moved or the
> scanning head is
> > moved.
> >
>
>
> I don't fully agree. One can design a very precise metal screw or other
> method for moving the CCD hea
In a message dated 7/21/2001 5:14:06 AM EST, [EMAIL PROTECTED] writes:
> Actually, Nikon LS2000 and LS30 and I suspect all the newer 35mm
> models, at least, move the scanning "unit" (CCD, lens and lighting
> source and any mirrors), and not the film.
Yes, every CoolScan Nikon scanner I've see
: Arthur Entlich [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 5:44 AM
To: [EMAIL PROTECTED]
Subject: Re: filmscanners: My replacement 8000 is banding like the
first one :-(
Lynn Allen wrote:
>
> Given: That the stepper mechanism is accurate, and not just a
> Using a microswitch or an optical sensor to detect the
> zero position is less accurate than the resolution of
> most scanners, which makes multi-pass multi-scanning
> impractical with these scanners.
I disagree. They don't have to re-home for each pass. Once home as
ascertained, and then th
In a message dated 7/21/2001 12:29:30 PM EST, [EMAIL PROTECTED] writes:
> > Using a microswitch or an optical sensor to detect the
> > zero position is less accurate than the resolution of
> > most scanners, which makes multi-pass multi-scanning
> > impractical with these scanners.
>
> I di
Ed wrote:
>One prediction:
>a major scanner manufacturer is going to release several
>features like this in the next year that will drive several of their
>competitors out of the scanner business.
>The low-end scanner business is quite competitive - witness
>AGFA's recent abandonment of the low-
Not to worry - I have a Beta VCR and I'm still using it for its intended
purpose.
Maris
- Original Message -
From: "Lynn Allen" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, July 22, 2001 8:21 AM
Subject: Re: filmscanners: My replacement 8000 is
nt: 20 July 2001 02:56
> To: [EMAIL PROTECTED]
> Subject: RE: filmscanners: My replacement 8000 is banding like the first
> one :-(
>
>
> Paint the edges of the negatives green, and get some Shitake
> Stones or what
> ever they're called, sold at the high end stereo stores..
Austin Franklin wrote:
>
> > >
> > > Given: That the stepper mechanism is accurate, and not just a piece of
> > > trash...
> > > Then: It would not matter whether the copy is moved or the
> > scanning head is
> > > moved.
> > >
> >
> >
> > I don't fully agree. One can design a very precise meta
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of rafeb
> Sent: 20 July 2001 14:11
> To: [EMAIL PROTECTED]
> Subject: RE: filmscanners: My replacement 8000 is banding like the first
> one :-(
>
>
> At 12:03 PM 7/20/01 +01
> Moving the film via a carrier, which is likely molded plastic, with
> plastic gearing, and also having it need to "mesh' with the motorized
> transport, and being that the carrier is prone to dust and dirt
> attraction and "the elements", makes it much harder to maintain
> integrity of precision
> > Moving the film via a carrier, which is likely molded plastic, with
> > plastic gearing, and also having it need to "mesh' with the motorized
> > transport, and being that the carrier is prone to dust and dirt
> > attraction and "the elements", makes it much harder to maintain
> > integrity o
In a message dated 7/23/2001 4:20:25 PM EST, [EMAIL PROTECTED] writes:
> I thought the Polaroid SprintScan 4k that I had used
> the plastic teeth in the carrier to move the film...but you are saying it
> only positions the film with those teeth, I assume then locks the carrier
> somehow, and u
> > I thought the Polaroid SprintScan 4k that I had used
> > the plastic teeth in the carrier to move the film...but you
> are saying it
> > only positions the film with those teeth, I assume then locks
> the carrier
> > somehow, and uses an other mechanism (lead screw perhaps) to
> move th
> > Are you a mechanical engineer?
>
>
> Many of the true marvels produced by man were made by people considered
> uneducated or unskilled in the profession they achieved in. Gaudi had no
> formal training in architecture, yet he designed and built some of the
> most memorable architecture in Spa
Austin Franklin wrote:
>
> > > I thought the Polaroid SprintScan 4k that I had used
> > > the plastic teeth in the carrier to move the film...but you
> > are saying it
> > > only positions the film with those teeth, I assume then locks
> > the carrier
> > > somehow, and uses an other mechani
> > Thanks, Ed! I learned something about hardware from you today ;-)
> I wonder if Ed is a Mechanical Engineer or not? Maybe you shouldn't
> trust him? ;-)
>
> Art
I don't care if Ed is a burger flipper at McDonald's, he know what he's
talking about ;-)
53 matches
Mail list logo