On Wednesday, October 30, 2002, at 07:45 PM, Thomas McFadden wrote:
yeah, it does, and the carbon version of emacs is great. but i also
want
to use emacs in XDarwin with the mappings i'm familiar with, and that
commond doesn't have the desired effect on GNU Emacs running in X. any
other idea
yeah, it does, and the carbon version of emacs is great. but i also want
to use emacs in XDarwin with the mappings i'm familiar with, and that
commond doesn't have the desired effect on GNU Emacs running in X. any
other ideas?
Tom
On Wed, 30 Oct 2002, William McCallum wrote:
> I think
>
> (set
I think
(setq mac-command-key-is-meta nil)
works in carbon emacs. There is a binary for the latest version of
Andrew Choi's carbon emacs at
http://www.webweavertech.com/ovidiu/emacs.html
---
This sf.net email is sponsored by: Influence the
hello,
i know this is an old problem, but couldn't find a solution in the
archives that worked, so here goes again: i'm running XDarwin
downloaded from Fink and META is mapped to the command key (and ESC) in
Emacs (i'm using GNU Emacs, not XEmacs). the only suggestion i've seen
for how to map it
On Wednesday, October 30, 2002, at 06:53 AM, Eric Desjardins wrote:
Hi,
Would be nice to have mysql++ libraries in devel section. I
successfully compiled it on Jaguar but I don't know how to make shlibs
with the configure script.
Sometimes it is --enable-shared
I have some experience in p
new version in cvs now.
[EMAIL PROTECTED] writes:
>i cannot install qvcd-0.11 - the source cannot be downloaded.
>The qvcd on the homepage is 0.2
>(http://www.steffen-sobiech.de/qvcd/qvcd-0.2.tar.gz)
-=[JFH] Justin F. Hallett
-=[JFH] Rendek Communications Inc.
-=[JFH] [EMAIL PROTECTED]
June Van Dyke wrote:
On 10/30/02 3:06 AM, "Martin Costabel" wrote:
>The only way to get the bad permissions onto my disk was to do something
>low-level such as (as root)
[]
I didn't see this email before, for some reason. Sorry about the earlier
email that blamed fink.
You were not wrong. I
On 10/30/02 3:06 AM, "Martin Costabel" <[EMAIL PROTECTED]> wrote:
> After playing with this some more, I found that I was *not* able to
> transfer these dangerous permissions from the binary installer's pax
> file to the actual "/" directory when I used the binary installer as
> intended, i.e. by
i cannot install qvcd-0.11 - the source cannot be downloaded.
The qvcd on the homepage is 0.2
(http://www.steffen-sobiech.de/qvcd/qvcd-0.2.tar.gz)
Where do i get qvcd and what is the correct version?
Thanks
--
thomas kotzian, [EMAIL PROTECTED]
-
It seems like xttitle, in addition to setting the title as the new
Terminal title, echoes it to the terminal... where it is subsequently
over-written by the prompt.
I get the same behavior in Apple's Terminal, but not in xterm. It seems
Terminal has a bug in the handling of the control sequence
On 10/30/02 3:37 PM, "Dan A. Milisic" <[EMAIL PROTECTED]> wrote:
> Kind of OT, but there's a bug in the OSX install CD that bit me a while
> ago, looks like it got you too. It's got *nothing* to do with fink
> messing up your install.
I didn't think fink had anything to do with it. It's good to
Kind of OT, but there's a bug in the OSX install CD that bit me a while
ago, looks like it got you too. It's got *nothing* to do with fink
messing up your install.
In my case, I did a full OSX install from the CD and during the install
set my localization to English only, de-selecting the other l
Two days ago I posted a message about problems I was having while
trying help a friend to download f2c from fink. It seems that the
problem was in using Jaguar with non-Jaguar-ready fink. He ran a
bootstrap to Jaguar-compatible fink, and supposedly he now has fink
up-and-running. And he down
I can confirm this: 10.2.1, August Tools, fink 0.11.0/0.4.9.cvs
On Wed, 2002-10-30 at 14:57, thomas kotzian wrote:
> i have already written an email but haven't got response.
> ckermit cannot be compiled and stops with the following error:
>
>
> ckuxla.h
> ckwart.c
> KFLAGS=-I/sw/include LIBS=-
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
sorry, been busy. i'll look into it asap.
On Wednesday, October 30, 2002, at 02:57 PM, thomas kotzian wrote:
i have already written an email but haven't got response.
ckermit cannot be compiled and stops with the following error:
ckuxla.h
ckwart.
On 10/29/02 6:37 PM, "Martin Costabel" <[EMAIL PROTECTED]> wrote:
> It looks now more and more as if the binary installer under certain
> circumstances may reduce the permissions of "/" to 700, that is
> "drwx--". This would explain the inability to boot. By booting into
> single user mode, th
i have already written an email but haven't got response.
ckermit cannot be compiled and stops with the following error:
ckuxla.h
ckwart.c
KFLAGS=-I/sw/include LIBS=-L/sw/lib make macosx10nc
Making C-Kermit 8.0.201 for Darwin + ncurses...
make xermit KTARGET=${KTARGET:-macosx10nc} \
"CFLAGS= -DMA
The easiest way is just to download it manually and move it to /sw/src.
A 'fink install' will install the package.
On Wed, 2002-10-30 at 12:46, Pierre Gambarotto wrote:
> fink can't download the qt source from the trolltech ftp (maybe because
> my firewall, mybe for another reason)
>
> So I'd l
No worries: if others see the same behavior, they can refer to this
thread.
I wonder if this could be related to the new splitoff configuration: I
built the packages yesterday, but haven't installed them as of yet.
On Wed, 2002-10-30 at 13:02, Andrew Hartung wrote:
>
> On Wednesday, October 30
I'm using kword, and I'm having trouble with ispell. Fairly frequently
when using kword I will notice that my processor goes to 100%, when I
check which process is responsible it is invariably ispell. Does anyone
know of a fix or a replacement to make things work? I have also tried
aspell it do
On Wednesday, October 30, 2002, at 11:39 AM, Alexander Hansen wrote:
It may take a while--it's a pretty big package that is getting
uncompressed and files moved.
It finally finished, took around an hour. I don't remember it taking
this long before, but it has been a while since I had compil
sudo shutdown -r now (will reboot)
or
sudo shutdown -h now
michael
Dr. Michael Baudis
Dept. of Pathology
Stanford Medical School
300 Pasteur Drive
Stanford, CA 94305-5324
U.S.A.
[EMAIL PROTECTED]
fon: ++1 (650) 723 5340
fax: ++1 (650) 498 6222
-
fink can't download the qt source from the trolltech ftp (maybe because
my firewall, mybe for another reason)
So I'd like to specify another source for the download, for instance
the source from the debian distribution.
How can I do that ?
Pierre
---
Sodipodi-0.27-1 builds for me (10.2, August Tools, latest fink from CVS)
but I get the following runtime error:
[ldx3:~] hansen% sodipodi
dyld: sodipodi Undefined symbols:
__ZNKSi6gcountEv
__ZNKSt9basic_iosIcSt11char_traitsIcEE3eofEv
__ZNKSt9basic_iosIcSt11char_traitsIcEE4failEv
__ZNKSt9basic_ios
It may take a while--it's a pretty big package that is getting
uncompressed and files moved.
On Wed, 2002-10-30 at 12:05, Andrew Hartung wrote:
> How long should I allow for the unpacking of xfree86-base?
>
> > Preparing to replace xfree86-base-shlibs 4.2.0.1-3 (using
> > .../xfree86-base-shlibs
On mercredi, oct 30, 2002, at 16:55 Europe/Paris, Cunningham Andy wrote:
Martin Costabel wrote:
>You are not the only one who had this happen. We'll find out if there
is a general problem.
Well, I for one can verify that the 0.4.1 binary installer does cause
such weirdness. I installed 0.4.1
How long should I allow for the unpacking of xfree86-base?
Preparing to replace xfree86-base-shlibs 4.2.0.1-3 (using
.../xfree86-base-shlibs_4.2.0.1-3_darwin-powerpc.deb) ...
Unpacking replacement xfree86-base-shlibs ...
Preparing to replace xfree86-base 4.2.0.1-2 (using
.../xfree86-base_4.2.0.
Try sudo halt
that usually works for me :)
-Esteban
On Wednesday, October 30, 2002, at 05:39 AM, Ferdinand Klinzer wrote:
hello Fink Users!!
This is a Off Topic Thread!
My question is how can i shutdown mac os x 10.2.1 in the Terminal ???
"shutdown now" --- my system goes in the darwin con
Martin Costabel
wrote:
>You are not the only one
who had this happen. We'll find out if there is a general problem.
Well, I for one can
verify that the 0.4.1 binary installer does cause such weirdness. I installed
0.4.1 on a fresh 10.1.5 system, and after a reboot the hard drive icons
dis
You need to have the unstable tree enabled
(http://fink.sourceforge.net/faq/usage-fink.php#unstable).
Also, I'm not 100% sure it's available on 10.1, if that's what you're
using (since I'm on 10.2).
On Wed, 2002-10-30 at 10:46, Wiener, Matthew wrote:
> Hi, all.
>
> I'm missing something. Despit
Hi, all.
I'm missing something. Despite a recent cvs-update (2 days ago), I can't
find a package for pstoedit. fink install says it's not there, fink apropos
doesn't bring it up.
I haven't been able to build it from sources myself, either, presumably
because of the same problem now apparently f
Thanks to Peter, I was able to get pstoedit to build successfully. With
any luck, sodipodi will build and run.
--
Alexander K. Hansen
Associate Research Scientist, Columbia University
visiting MIT Plasma Science and Fusion Center
Levitated Dipole Experiment
175 Albany Street, NW17-219
Cambridge,
(Addendum to previous post to maintainer re: sodipodi failing to build)
I ran the xfree86 updates which appeared yesterday and retried updating
sodipodi. Pstoedit was now not a problem but it failed due to libart2
missing. I installed libart2 and sodipodi installed correctly.
--
Package manager
Hi,
Would be nice to have mysql++ libraries in devel section. I
successfully compiled it on Jaguar but I don't know how to make shlibs
with the configure script.
I have some experience in packaging rpms but not debs. I've read the
packaging faq, but didn't help me with the do it part.
I have s
hello Fink Users!!
This is a Off Topic Thread!
My question is how can i shutdown mac os x 10.2.1 in the Terminal ???
"shutdown now" --- my system goes in the darwin console ;(
"shutdown -h now" not going ?!?
"halt" --- that´s for me not shutdown ... thats halt like killall -9 ?!?
so what i
Do you remember Halloween is coming?
Take your chance to send a Free greeting from:
http://cards.web-space-station.com/halloween-greeting-card.html
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek
36 matches
Mail list logo