Just did a quick test using my Agilent 4402 Analyzer & commercial 0.1 to 1.0 GHz
Log Periodic Test Antenna to sniff the air while I transmitted.
With the analyzer in peak hold mode, sending CW dashes after calibrating Tx
output with TEST to 1500 W, the analyzer displayed the peak of the RF envelop
Folks
I welcome any 'movement' towards making the console more efficient. I agree
with Larry though. Dropdown boxes, tabbed areas, Tabs at bottom which bring
up huge amounts of mode specific area on current console foreground. "When
in CW, do as the CW'ers do!", only in the foreground ON the conso
Sid
Check with Bill KD5TFD. He has mentioned a brand on Teamspeak he is using
which are the least susceptible to RF pickup and thumping.
Eric - AA4SW
Hi all,
I am new to the list & eagerly awaiting the SDR in the mail. I'm sure
that I will have many questions, as I'm not into software generati
Frank
(snip)
***
Second point. "Running out of real estate" is a poor excuse
for starting to restrict what people can bring out to the
front easily. This is a software radio, for heaven's sake.
If you're running out of real estate, *the d
Phil
(snip)
*
For those of us who can make changes to the code we basically can have
anything we care to code. But there still needs to be some kind of
standard console (as Larry mentioned) as a common point of reference
for all
I think you can even drag them on to separate digital monitors.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Philip Covington
Sent: Friday, June 24, 2005 10:45 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Console running out of room?
On 6/2
Folks
Knock yourself out!
http://www.flex-radio.com/forum/viewtopic.php?p=7054#7054
(When you’re through I have many more from the forum)
A better approach:
http://www.flex-radio.com/forum/viewtopic.php?p=5716#5716
Eric – AA4SW
Bob and others,
my apologies - I found the problem which has been as expected originated
"between the headphones". The reason was an abnormal low buffer setting of 64
at the DSP Tab ... please forgive me.
73 - Klaus, DK7XL
---Ursprüngliche Nachricht---
From: "Klaus Lohmann" <[EMAIL PROTECTE
Folks
Anyone try this style mother yet?
http://www.leadman.com/products/item.cfm?prodcd=B7VEPN8&DROPSHIP=N
Eric
Bob,
> While the new keyer is so much better than the old one, it is clearly
> time to leave the
> parallel port and add . . . . ONE MORE CABLE.
Unashamedly promoting my own design I'd like to add that more cables
may not be needed! With the USB interface we can replace the parallel
port alto
Klaus:
Frank and I wrote the code that does the smaller buffer sizes in the dsp
and in the console and I have
done this several times. Yesterday I argued with Eric that we had a
serious problem as you had
pointed out until I remembered that the receiver IQ balance is not the
same as a perfe
ecellison wrote:
Frank
(snip)
***
Second point. "Running out of real estate" is a poor excuse
for starting to restrict what people can bring out to the
front easily. This is a software radio, for heaven's sake.
If you're running out of
Hello to All: I noticed that when I change the Tx bandwidth on the low
setting that my receive bandwidth seems to change. I am running 1.3.12,
Delta 44, USB control line, P-4 1.7 processor. Delta 44 DMA buffer at
512, Card 1 buffer at 1024. Run up the transmit low side bandwidth and
the bandwi
Here's another neat little app that allows you to have the
mouse and keyboard span multiple PC's. You just move the
pointer across the multiple screens. Wherever the pointer is
the PC that has the keyboard and mouse focus. The behavior
reminds me a lot of multiple monitors under Windows except
tha
Larry
Well, I was overstating on the 'banning' discussion, sort of to make a
point. We all have delete keys (smile). Everyone's idea for console
modification is great. As you can see, I posted your white paper later in my
reading of the discussions, that is where I think the master programmers and
Ooops, I hate it when I leave key bridge words out
... The behavior reminds me a lot of multiple monitors under
Windows except that you *CAN'T* move applications from screen
to screen.
N9DG
--- Duane - N9DG <[EMAIL PROTECTED]> wrote:
>
> Here's another neat little app that allows yo
ecellison wrote:
Well, I was overstating on the 'banning' discussion, sort of to make a
point...
It's not a bad idea to modulate discussion on this subject,
because most everybody (yours truly!) has strong feelings on
the subject, and it's an easy subject to have opinions about.
The task i
I have a posting on the Forum and thought I should post here too. I have
what seems like a hardware problem. I have SDR 1000 bought in Dayton 2004.
I Have never had it working yet but hav3e been fighting on and off with
computer/sound interface type issues and have anew machine and sound card
I admit, I am silly.
I have :
> PowerSDR 1.3.12 working, Enable CAT checked,
> N8VB vCOM virtual serial port driver installed (I think),
What procedure must I follow to obtain a connection with Ham radio
Deluxe, so I can use logbook and PSK ?
I am trying to create a connection to Kenwood - TS50S
José,
Are you sure you selected the other com port of the same pair in SDR 1000?
73 de Ignacio, EB4APL
José Dumoulin escribió:
I admit, I am silly.
I have :
> PowerSDR 1.3.12 working, Enable CAT checked,
> N8VB vCOM virtual serial port driver insta
Hi All,
This simple sentence from Larry, W0DZ solved my problem.
I just made the same mistake. Make sure you use two COM ports --
one for the SDR ,one for HRD. The vCOM driver will connect them to
each other.
73 - José
I have been having my share of intermittent problems with the SDR but
this looks terminal. After the master oscillator being off a city
block, replaced, now on, but drift in the first 15 minutes, we were on
the air for a few months. I put 1.3.12 up this morning and no power out
to a watt mete
For those who don’t already have it, PowerSDR Beta
1.3.12 was released late last night fixing a few critical bugs. See the
release notes for details at the link below. Thanks to N9VV and KD5TFD for
hosting this for us overnight.
http://www.flex-radio.com/forum/viewtopic.php?t=1738
Someone wrote a note to say that the TX filter setting seemed to be
having an
effect on receive filtering. I cannot duplicate this. I also turned on
all of the
debugging and TX filter changes on the Setup->Transmit tab call the right
function which sets only the tx filter. RX filter changes
Jerry,
I can't tell much from your description. Please send me a direct email with
more details. Is this the 1W or the 100W version?
Gerald
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of jerry
> Sent: Saturday, June 25, 2005 12:52 PM
> To: FlexRadio
Doug,
If you have only the original three board set, the RFE Installed check box
must be OFF on the Setup>General tab. Your description sounds like the
software expects the RFE board.
Gerald K5SDR
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Doug Ba
I have had my 100 watt SDR-1000 since the middle of March 2005. The
radio has performed flawlessly until today or at least this is the first
day that I noticed a serious problem. Given this is Field Day weekend,
I attempted to go to the 17 meter band. I had been on 75 meters earlier
as well
While listening to a QSO. I opened Setup, Transmit tab and begun
manipulating the sliders of the equalizer. Reception became bad and I
was obliged to close the console and switch the rig off.
I could reproduce this anomaly. Has someone noted that ?
73 - José F5JD
I did more testing.
Has anyone monitored themselves on AM, FM, or DSB?
Not the Panoramic display, not the Monitor button,
but listening to themselves with another receiver?
I soldered a new "Y" cable for Line Outputs and
tested with no change. Suspecting a problem with
my Delta 44, I put a dual
Field Day provides an excellent example of
crowded band conditions, perfect for demonstrating
your SDR-1000 to friends when the bands are dead.
I've already recorded some five-minute-long
files on 20 and 40 SSB and CW.
This is sure a nice feature of the SDR-1000.
Mike AA8K
I just reinstalled 1.3.12 and when the equalizer is activated the receive
audio changes drastically when the sliders are moved. Earlier I was
seeing the same when the transmit bandwidth was adjusted but now that I
reinstalled the software the equalizer now changes the audio.
Dave-W4DWG
New SDR-1000 user, receives great but
has no or little RF output.
Behaves as if there is a high SWR.
With the power off, I can see my 50 Ohm
dummy load all the way back to the 1
Watt transmitter board.
I have a commercial 100 Watt load and
a Bird Watt meter. Substituted a second
100 Watt load w
Hello Harold,
I can't help you with your radio problems, but I feel I have to
congratulate you on the apparently proper use of the word "ameliorated".
I hope you don't think I'm being perfidious!
Love,
Bob K6GGO
Harold Bissonnet wrote:
I have had my 100 watt SDR-1000 since the middle of Marc
For what it's worth, I had a similar problem with my SDR100-PWR initially in February and March. A bit later on, it also developed a severe RF feedback in the PA when switching from TX to RX on bands 17 meters and higher that blew the fuse. Gerald couldn't see a problem when I sent it in, a
Hello: Is there a link to ver 1.3.13?
Thanks,
Dave-W4DWG
I loaded up Phil's program, vCom, drivers. Loaded without a hitch except
it continues to connect to Com Ports 24 and 25, and the PowerSDR console
only will go only to port 20. I had edited the N8VBvCOM.inf to read below
before I installed. I did try to edit the registry to force port 8 an
36 matches
Mail list logo