Hey-ho a nice idea. I was thinking of something similar for my own software
and decided to have a small window - maybe system tray icon - where keyboard
/ mouse input is routed through to the main program. The code from
www.codejock.com has some nice ideas in the system tray area.
The glory
True, but the fan in the SDR1k needs an 80mm X 15mm format (very thin) and I
could not find one in that format that had the temp sensors that were not
10-20 dBA louder than the fan currently installed.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com
Hello to the list. I hope someone can shed some light on a problem that I am experiencing. The setup here is a Pentium 4 3GHz - 512 BM - Delta 44 , VAC and VCOM. I am using MixW for my digital modes.
I am finding that while I am able to control the MixW software and decode digital transmissions,
I agree with this. The sliders are almost unusable in DigU/DigL.
Bob
rihob., es7aaz wrote:
Hi,
moving a width slider in digu or digl mode causes a strange
filter behavior ;)
rgds,
riho, es7aaz
___
FlexRadio mailing list
I have been unable to make HRD connect with Pwr Sdr 1.4.5prev 5 or 6. Worked fine with the previous versions. Suggestions would be apreciated. Thanks, Art
Yahoo! FareChase - Search multiple travel sites in one click.
The first of this seasons Candlelight tests takes place this Sunday (20th) -
excellent
opportunity to check out your low power receiving capabilities. Go here for
details:
http://www.uba.be/actual/candlelight/candlelight_en.html
73
Trevor G0KTN
[ I'm resending this - looks like the first one got lost ]
I noticed that although DIGU sets the filter up in the upper sideband,
when transmitting
it can transmit on the lower sideband (or at least the panadaptor
display appears to show this).
If you select LSB and then select DIGU and then
Hi,
RTTY Click-Tuning offset should be 2210Hz, not 2040Hz
if Mark freq. is 2125Hz and shit 170Hz as HAM default.
rgds,
riho.
Ciao a tutti !!
Con questo post voglio portare a conoscenza di tutti gli SDR Italiani che
nel forum originale sul sito www.flex-radio.com รจ stata aperta la sezione in
lingua Italiana con diversi argomenti specifici.
Sperando posaa essere cosa gradita e utile a tutti, un caloroso saluto.
Beppe
What should be the image rejection of the receiver with respect to the image
at about 21 KHz offset?
Thanks!
- Jeff, WA6AHL
attachment: winmail.dat
Hello Jeff. Thank you for your response. Given your comments, I tried to press the MOX button prior to activating the RTTY/PSK transmission with the same results. The only way I can minimize the pulsing somewhat is by changing the VAC buffer setting to 512.
Serge
VA3SBJeff Anderson [EMAIL
Now that the SDR1000 is working well, I would like
to extend my interest to EME,
can someone please give me some advice as to the
add-ons I will need.
Thanks
Ross
ZL1WN
Ross,
1296, 23 cm, is probably the simplest band to get on and there is a
bunch of activity worldwide. Plug EME into your favorite search
engine and spend a few weeks there.
See http://www.kuhne-electronic.de/english/frameset.htm for a 28 MHz -
1296 MHz transverter, 200 w or bigger amp, and
13 matches
Mail list logo