The same place you obtained 3.10. You are aiming for 3.12.
Bob
Bill Nagle wrote:
Where do I obtain VAC 3.11 ?
Bill Nagle
[EMAIL PROTECTED]
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradi
Tom:
What typically happens is that SOMEONE ELSE, who has your email address
in THEIR address book gets nailed. The beagle then takes all those
email addresses and uses them.
Sigh. . . .
Bob
Tom Thompson wrote:
Hello,
My email address has been associated with the [EMAIL PROTECTED]
I expect that we will publish it on the website when it is
ready.
Gerald
Gerald Youngblood, K5SDR
President
FlexRadio
Systems
8900 Marybank Drive
Austin, TX 78750
Ph: 512-250-8595
Email: [EMAIL PROTECTED]
Web: www.flex-radio.com
From: Jim Lux
[mailto:[EMAIL PROTECTED] Sent: Tue
>From where you purchased your original version.
Eric Wachsmann
FlexRadio Systems
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of Bill Nagle
> Sent: Tuesday, February 07, 2006 4:20 PM
> To: FlexRadio@flex-radio.biz
> Subject: [Flexradio]
Where do I obtain VAC 3.11 ?
Bill Nagle
[EMAIL PROTECTED]
I had the same problem.. after I went to a newer version of VAC, all is
well.
Terry, W0VB
Quoting Tim Ellison <[EMAIL PROTECTED]>:
> Bill,
>
> If you are using VAC 3.10 it will crash. With VAC 3.11 it will not. It
> isn't a PowerSDR issue.
>
> -Tim
> ---
> Tim Ellison ( [EMAIL PROTECTED] )
Bill,
If you are using VAC 3.10 it will crash. With VAC 3.11 it will not. It
isn't a PowerSDR issue.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bill
I do not notice this problem here.
73 - José
Bill Nagle a écrit :
In version 12 of the sdr software if you do the following it will crash into
debug mode:
1-bring up the powersdr and sdr1000
2--switch the mode to either DGL or DGU
2--go from STANDBY to ON condition
3--go from ON to STANDBY t
In version 12 of the sdr software if you do the following it will crash into
debug mode:
1-bring up the powersdr and sdr1000
2--switch the mode to either DGL or DGU
2--go from STANDBY to ON condition
3--go from ON to STANDBY then back again
This also occurs if you are in the ON mode and switch f
Hot off the presses: http://www.fcc.gov/oet/info/rules/part15/part15-2-1-06.pdf
(means it includes BPL rules, etc.)
of interest:
In definitions: (k)Digital device. (page 6) unintentional radiator that
generates and uses > 9000 pulses/second. An intentional radiator or RF
device subject to ema
Ray,
I'm a little bit confused by what you are saying. If you are talking
about the Low and High filter cut controls on the front panel, these
seem to operate as intended for me (up arrow increases the frequency,
down arrow decreases it). The only thing I can come up with to explain
this would b
I have a brand spanking new SDR-1000 (received Friday, 2/3) & am running
preview 12. I have noticed that the vertical scroll bars linked to the high
& low limit text boxes used for setting the variable filters seem to be
working "backwards". In both cases, clicking the "Up" arrow causes the
f
Hello,
My email address has been associated with the [EMAIL PROTECTED] virus on
the reflector. Currently I am in Costa Rica, but I was able to connect
to my home computer via VNC. I downloaded the fixes for the
contamination, but found no signs of the virus files or registry entries
on my m
At 06:46 AM 2/7/2006, Gerald Youngblood wrote:
Dear
FlexRadio Customers,
At 0100 UTC on February 17th we are planning to
hold a FlexRadio Town Hall Meeting on Teamspeak. Bob McGwier (N4HY)
Eric Wachsmann (KE5DTO), and I will be there to discuss the new PowerSDR
software roadmap and to answer y
At 05:32 AM 2/7/2006, Pedlow, Lee wrote:
Hi Gerald:
While you may have discussed Ham radio with somebody at ARRL, I too would
caution you regarding belief that you are exempt from FCC part 15
certification through a NRTL. With some exemptions, computing devices and
their peripherals must meet s
Dear FlexRadio
Customers,
At 0100 UTC on
February 17th we are planning to hold a FlexRadio Town Hall Meeting on
Teamspeak. Bob McGwier (N4HY) Eric Wachsmann (KE5DTO), and I will be there
to discuss the new PowerSDR software roadmap and to answer your questions.
We only have room for 50
Larry Loen wrote:
Serious thought should be given to this for the "SDR 2000".
[...]
The SDR-2000 seems to be a name commercially already taken
Look here : http://www.spectralaudio.com/sdr-2000.htm
73 Alberto I2PHD
Hi Gerald:
While you may have discussed Ham radio with somebody at ARRL, I too would
caution you regarding belief that you are exempt from FCC part 15
certification through a NRTL. With some exemptions, computing devices and
their peripherals must meet such testing as generally do all devices
con
I should also add - the carrier was present with version 1.4.4 - I haven't
done any checking of suppression with Preview 12, as I think this issue is
probably related to hardware, rather than software (i.e. possibly due to a
parasitic imbalance in the TX-side QSD).
- Jeff
-Original Message---
For what it's worth: I noticed some time ago that carrier suppression on my
SDR1K varies from band to band, and is unaffected by the Tx Image
cancellation settings.
Suppression is worse at the higher bands, such as 10 meters.
- Jeff, WA6AHL
-Original Message-
From: [EMAIL PROTECTED]
[ma
Bob
I remember talking to you last May about using SDR concepts in this area. I
have since built a prototype radio for the 120 kHz ISM band using a $10
off-the-shelf IC, a $12 APEX TO-220 case audio amplifier and a small loop
antenna to identify, count and track pigs, cows, pets & people stealing
21 matches
Mail list logo