[Flexradio] One Shoe Will Not Fit All

I believe that no matter wot GUI look is eventually developed, we will never satisfy everyone. There will be many who will be over the moon, and many who will be disappointed. It is going to a difficult task to satisfy everyone, not to mention all the programming that its going to take to get a new

[Flexradio] Shuttlepro and SVN 563

Well, I apologize for the bandwidth. I don't know why, but when I upgraded to SVN 563 for some reason it messed up the shuttlepro. Did not happen when I had upgraded to SVN 562. I reprogrammed it and all is well now. Strange, but then agn, that is an often occurrance with me ... hihi. 73/Crit/K4BX

[Flexradio] Shuttlepro and SVN 653

My shuttlepro which worked perfectly w/ 1.6.2 and SVN 652 does not work as it did w/ the latest SVN 653. Anybody else notice this? 73/Crit/K4BXN ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_f

Re: [Flexradio] SVN 653

> Jeff, not to worry. We received enough mail that it will stay on the front > panel. > > keep the RF Gain control (call it what you like: "Max AGC Gain" or > whatever > might be more intuitively appropriate) on the front panel. I use it all > the > time I never said to take it off the pane

[Flexradio] various and sundry audio interfaces

looking at USB and/or PCMCIA interfaces, I was wondering if anyone had tried any of these: Roland/Edirol UA-1EX 24bit/96kHz stereo in + stereo out and mic and headphones too ($80) The mic just feeds both line in (with a buffer). Ditto with the headphone/line out. It's kind of weird, but at 96

Re: [Flexradio] SVN653

José, I experienced a similar problem with SVN 652 , and I found that under Setup->Options my X2 delay was set to 1000 ms. I hope this helps. 73 Tom WØIVJ José Dumoulin wrote: >Hi Friends > >I am using SVN 653. When clicking mox or pressing the PTT, I note a >certain latency before the r

Re: [Flexradio] No ALC connection on SDR1000

lexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060824/c2853cc6/attach

[Flexradio] Beep on AM

Yep, I get it too--some of the time. W8XO ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: h

Re: [Flexradio] SVN 653

Jeff, not to worry. We received enough mail that it will stay on the front panel. John P. Basilotto W5GI Marketing and Product Manager FlexRadio Systems Office 512-250-8595 Mobile 512-663-6727 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jeff Anderson Sen

[Flexradio] Kudos for TX Profiles on console

Eric, Many thanks for adding the ability to see and change TX profiles from the console in SVN 653. I can now easily tell why I am not "getting out" on SSB when I have a 100 Hz PSK filter engaged. Talk about "pinched" audio! HI HI! Obrigado por você grande esforço -Tim --- Tim Ellison Integra

Re: [Flexradio] No ALC connection on SDR1000

Hello Jerry, I think ALC is greatly overrated. Wasn't it originally conceived as a method to reduce splatter by preventing overdrive to an amplifier? Even at that, it has problems because there is a delay between the time the alc circuit detects overdrive and the time the transceiver reduce

[Flexradio] SVN653

Hi Friends I am using SVN 653. When clicking mox or pressing the PTT, I note a certain latency before the relay closes. I have not this behaviour with previous builds. Anybody ? 73 José F5JD ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://

Re: [Flexradio] feature request completed -- Thank you

I don't think there is a way to remove them. We can give them different states, but I don't think the states make sense right now (for now they match our bug tracking states). We'll get that worked out over time. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROT

Re: [Flexradio] No ALC connection on SDR1000

Although the Alpha amps have an output for ALC the manual states that it is not recommended that it be used! It provides limited protection to overdrive and was often set up improperly. All in all, it does little good and can do a lot more "bad" when not adjusted properly. A number of Alpha amps

[Flexradio] feature request completed -- Thank you

Thanks for changing the tuning rate selection ( SVN 653 ?? ) ... I was getting frustrated with hitting the mouse wheel and changing the tune rate when all I wanted to do was change the frequency... By the way, how do I remove a feature request from the list once it has been implemented ? AL, K

Re: [Flexradio] SVN 653

Good idea to disambiguate (love that word!) the controls. Just please, until you get some sort of docking/setup scheme per Dan's recommendations, keep the RF Gain control (call it what you like: "Max AGC Gain" or whatever might be more intuitively appropriate) on the front panel. I use it all the

Re: [Flexradio] SVN 653

> [Eric] No. The RF control sets the Max AGC gain. This is not the same as > setting the RX gain for VAC which sets a constant gain in order to > normalize > the audio comfortably while still providing appropriate gain to the third > party software. If the RF control works for you, that's gre

Re: [Flexradio] No ALC connection on SDR1000

Might not work with Amps having tuner built-in like my Quadra (if tuner is used). Looks like LP-100 is meant to operate with a 50 ohm output amp. Jerry At 17:25 8/24/2006, Gerald Capodieci wrote: >Thanks everyone. I like Brian's (W5AMI) solution. He's buying a LP-100 >Digital Vector watt meter w

Re: [Flexradio] No ACL Output? What if the Linear requires an output

UPDATE: I contacted W8JI, who is an expert on amps, and asked would the ALC have protected the amp for me when the coax connector failed. He said it would NOT have helped in my catastrophic situation. So apparently the ALC line is of limited usefulness, and probably can be ignored without putt

Re: [Flexradio] No ACL Output? What if the Linear requires an output

I don't think ALC would help on an antenna/feedline failure. Most amps have a tuned input that pretty much stays at a constant load for the exciter regardless of the load the output of the amp is looking at. An SWR alarm or auto shutdown on the keyline to the amp WOULD certainly help in case of h

[Flexradio] Prototype GTK implementation of GUI design by Beppe IK3VIG

As part of a self learning project I have been playing with the GTK+ 2.0 toolkit using it to develop a GUI interface for the Linux DttSP code. I have spent some time trying to implement the GUI design that Beppe, IK3VIG, has proposed and now have something that I can share. It is still very mu

[Flexradio] No ALC connection on SDR1000

--- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060824/aada617f/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Arc

Re: [Flexradio] No ACL Output? What if the Linear requires an output

I recently asked a similar question, Jerry, and was told that guys running the SDR-1000 just don't use hardware ALC. Many who spoke up said they never had any problem. I once blew up the output circuit of an Amertron AL-1200 because it had no way to shut down the exciter when the antenna circui

Re: [Flexradio] No ACL Output? What if the Linear requires an output

Gerald I suggest you look in this months archives and sort by subject. Look for this ( ALC for use with QRO external amp? ). There were quite a few replies on this exact subject already, just a few weeks back. Enjoy Duffy NA6MM ___ FlexRadio maili

[Flexradio] No ACL Output? What if the Linear requires an output

ubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060824/3a916793/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archiv

Re: [Flexradio] Tortoise Down?

Dale, Try this: 1. From your Windows Explorer (the File system explorer -- not Internet Explorer), click on: File > TortoiseSVN > Repo-browser 2. Paste the following URL into the URL textbox on the small dialog box that pops up: svn://206.216.146.154/svn/repos_sdr_windows/PowerSDR/trunk/bin/

Re: [Flexradio] CPU % indicator

This indicates that the PerformanceCounter is disabled on his computer. Please see the following links that describe how to fix the problem: http://www.flex-radio.com/forums/viewtopic.php?t=1370&highlight=performance+ counter http://www.flex-radio.com/forums/viewtopic.php?t=879&highlight=performa

[Flexradio] CPU % indicator

This is not a bug, so I'm going to ask the folks on the list if they can shed some light on an odd problem. A friend of mine has an SDR-1000 and has tried all various svn's, k6jca's console, etc., and he has never been able to see the indicator at the lower left - CPU % xxx. It's just blank where

Re: [Flexradio] SVN 653

On 8/24/06, Eric Wachsmann <[EMAIL PROTECTED]> wrote: > Comments inline below. Thanks for explaining all this to the list Eric. Personally, I'm really pleased with 653. This is the first time I've really been using the official Flex console since I started using K6JCA's. The newly added slider

[Flexradio] svn 653 audio noise

hi - after getting tortoisesvn to run and downloading the binaries, i started running 653. WOW! the new layout is great, excellent work here guys. this only gets better and better! when i started tuning around, i noticed a clicking and popping on the audio on cw signals, even on wwv at 10 mhz

Re: [Flexradio] SVN 653

Eric Wachsmann wrote > Comments inline below. > > > [Eric] I think someone mentioned this to your privately, but I wanted to get > this documented on the reflector. You can customize ANY of the pre-defined > filters by right clicking in the filter area and clicking the "Configure..." > button.

Re: [Flexradio] AM operation

This is a software issue that we are currently looking into. Thanks for the report. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of David Woodhead > Sent: Thursday, August 24, 2006 9:27 AM > To: FlexRadi

Re: [Flexradio] AM operation

On 8/24/06, David Woodhead <[EMAIL PROTECTED]> wrote: > When switching from transmit to receive in either AM or SAM I get short > squeel out of my speakers. It does not happen in SSB. It is not feedback > into the microphone. Bug or problem with my setup? That's a "roger beep"... No, just kidding

[Flexradio] AM operation

: /pipermail/flexradio_flex-radio.biz/attachments/20060824/14aad70f/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio

Re: [Flexradio] SVN 653

Comments inline below. > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Charles Greene > Sent: Thursday, August 24, 2006 12:40 AM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] SVN 653 > > Hi, > > I like the mode specific controls

Re: [Flexradio] SVN 653

At 02:05 AM 8/24/2006, Mel Whitten wrote: >Right clicking on the filter buttons will put you in a configure mode >and you can adjust the filters to 3Khz or whatever you want it.. >Mel, K0PFX Super! ___ FlexRadio mailing list FlexRadio@flex-radio.biz