Re: [Flexradio] Drifting Newbie

2007-03-15 Thread Jim Lux
At 08:02 AM 3/14/2007, Brian Kassel wrote: >Hello Peter: > >I added an 8 volt regulator circuit that powers only the PTC >circuit. the other solution that may work for you is to just disconnect the PTC thermistor. The temperature (and frequency) will take longer to stabilize, but might

Re: [Flexradio] WriteLog Voice Keyer and the SDR-1000

2007-03-15 Thread FlexRadio - Eric
Charles, I think you need to match the VAC sampling rate and the sampling rate of your wave files. Then you need to setup the VAC section of PowerSDR similar to the way you would for a digital mode program. Setup WriteLog to connect to the other end of the same cables and you should be good to g

Re: [Flexradio] WriteLog Voice Keyer and the SDR-1000

2007-03-15 Thread Bill Bordy
Hi Charles, It is not clear whether you are looking for a VAC solution or generic. My contesting, voice keyer implementation uses a second sound card. In addition to the D44 sound card, I use the motherboard sound interface and a Turtle Beach Santa Cruz sound card installed in my computer. I use

[Flexradio] Constant Clicking on Carrier

2007-03-15 Thread cniles
Flexers Help!! I have one last problem with my 2 week old SDR. There is a constant clicking imposed on a steady carrier of about once per second. Not easily heard on SSB unless one has a very critical ear or I ask. However, on CW it is easily noticed and it took me some time to finally hear it o

Re: [Flexradio] Constant Clicking on Carrier

2007-03-15 Thread Eric Wachsmann
Cylde, The first step I would take if I were you would be to connect speakers to the drive audio that normally drives the transmitter. If you can hear the clicks there, then it is a software/computer related issue (Check for virus scanners, firewalls, etc that run in a high priority). If not, th

[Flexradio] WSJT and BCI filter definitions

2007-03-15 Thread Gerald Capodieci
Someone please provide simple definitions for: WSJT and BCI filter -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070315/24b96ef0/attachment.html

[Flexradio] WL and SDR

2007-03-15 Thread Philip Theis
I am using a separate sound card. Delta 44 for the SDR and a cheapo for WL. works like a dream. Phil K3TUF ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www

Re: [Flexradio] WSJT and BCI filter definitions

2007-03-15 Thread Eric Wachsmann
BCI = BroadCast Interference. Enabling this button on the latest console available on SVN will switch the band pass filter to the 6m band instead of using the 160m band when tuned below 2.5MHz. This can help keep strong broadcast signals from overloading nearby signals. This comes at a cost of s

Re: [Flexradio] WSJT and BCI filter definitions

2007-03-15 Thread Ken N9VV
ple definitions for: > WSJT and BCI filter > -- next part -- > An HTML attachment was scrubbed... > URL: > http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070315/24b96ef0/attachment.html > > ___

[Flexradio] SDR Linux User Group Meeting this Evening

2007-03-15 Thread n4xwe
-- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070315/af29b1c6/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo

[Flexradio] SDR drive power

2007-03-15 Thread Myrlen Smith
ed the mic boost but that just increases the back round noise. I hope I explained this well enough so anyone can give me some ideas. Thanks Smitty WB3IAL -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz

Re: [Flexradio] SDR drive power

2007-03-15 Thread Eric Wachsmann
this well enough so anyone can give me some ideas. > > Thanks > Smitty WB3IAL > > > -- next part -- > An HTML attachment was scrubbed... > URL: http://mail.flex-radio.biz/pipermail/flexradio_flex- > radio.biz/attachments/20070315/e1f1ec87/attachmen

[Flexradio] UCB Antenna Relays

2007-03-15 Thread Steve Nance
- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070315/bd176c5f/attachment.html -- next part -- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 3782 bytes Desc:

Re: [Flexradio] SDR drive power

2007-03-15 Thread Myrlen Smith
lained this well enough so anyone can give me some ideas. > > Thanks > Smitty WB3IAL > > > -- next part -- > An HTML attachment was scrubbed... > URL: http://mail.flex-radio.biz/pipermail/flexradio_flex<http://mail.flex-radio.biz

[Flexradio] Fw: SDR drive power

2007-03-15 Thread Myrlen Smith
lained this well enough so anyone can give me some ideas. > > Thanks > Smitty WB3IAL > > > ------ next part -- > An HTML attachment was scrubbed... > URL: http://mail.flex-radio.biz/pipermail/flexradio_flex<http://mail.flex-rad<http://mail

[Flexradio] Fw: Fw: SDR drive power

2007-03-15 Thread Myrlen Smith
e can give me some ideas. > > Thanks > Smitty WB3IAL > > > -- next part -- > An HTML attachment was scrubbed... > URL: http://mail.flex-radio.biz/pipermail/flexradio_flex<http://mail.flex-rad<http://mail.flex-radio.biz/pipermail/flexr

[Flexradio] [KB] A new Knowledge Base article has been submitted

2007-03-15 Thread Tim Ellison
greater frequency stability for the SDR-1000 -Tim - FRS KB Administrator -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070315/516281f4/attachment.html