Hi Ken,
K2 is actuated when switching the sensitivity: Medium and High, Low and Off.
with RFE: in LOW and OFF there is no Resistor (or the cutoff resistor)
across the INA163 and the gain is 0dB or 1. In the Medium and High position
the Gain-Set-Resistor is 316 Ohms resulting in a gain of about
I still haven't resolved my problem despite Eric's help.
I have an SDR1K with a built-in DEM 144MHz transverter. I use the
output of the 144 transverter to drive a 144MHz to 70MHz transverter.
So, I click on the 2 button of the Band Selection buttons, and the
second transverter inputs/outputs at
Hello, folks.
I've been working with the Flex-Radio guys trying to get my new SDR-1K
on the air. The latest idea is that it might be a configuration
problem or hardware malfunction with the LPT port on the computer end
of the radio. How can I verify that a port is operating properly in
the
Make sure the address of your parallel port in the BIOS is the same as the
PowerSDR value. My first time using PowerSDR was with a thinkpad and the
default in the bios was nothing like any address I had ever seen, I changed the
value and it came right up
73 W9OY
All,
I've been reviewing and updating the CAT software over the past few weeks.
I discovered that the old Kenwood FW command (selects or reads the DSP rx
filter width, non-SSB only) is really no longer applicable since we went to
mode-dependent filters. The ZZFI command has been updated to
On 4/4/07, Neal Campbell K3NC [EMAIL PROTECTED] wrote:
Just saw the ad in QST for the new radio. When will it go on sale?
Neal Campbell K3NC
[EMAIL PROTECTED]
Give us some details about the SDR-5000 ad please.
73 Phil N8VB
___
FlexRadio mailing
://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070404/33e499a0/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail
On 4/4/07, Alan NV8A [EMAIL PROTECTED] wrote:
On 04/04/07 02:37 pm Neal Campbell K3NC wrote:
Just saw the ad in QST for the new radio. When will it go on sale?
I've just looked through the April QST again without seeing anything
about an SDR-5000. There doesn't seem to be a FlexRadio ad at
Philip Covington wrote:
On 4/4/07, Alan NV8A [EMAIL PROTECTED] wrote:
On 04/04/07 02:37 pm Neal Campbell K3NC wrote:
Just saw the ad in QST for the new radio. When will it go on sale?
I've just looked through the April QST again without seeing anything
about an SDR-5000. There doesn't seem
On 04/04/07 03:35 pm I wrote:
Just saw the ad in QST for the new radio. When will it go on sale?
I've just looked through the April QST again without seeing anything
about an SDR-5000. There doesn't seem to be a FlexRadio ad at all.
I have been informed in a personal e-mail that the ad's in
On 4/4/07, Alan NV8A [EMAIL PROTECTED] wrote:
On 04/04/07 03:35 pm I wrote:
Just saw the ad in QST for the new radio. When will it go on sale?
I've just looked through the April QST again without seeing anything
about an SDR-5000. There doesn't seem to be a FlexRadio ad at all.
I have
At 01:30 PM 4/4/2007, Philip Covington wrote:
On 4/4/07, Alan NV8A [EMAIL PROTECTED] wrote:
On 04/04/07 03:35 pm I wrote:
Just saw the ad in QST for the new radio. When will it go on sale?
I've just looked through the April QST again without seeing anything
about an SDR-5000. There
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070404/33e499a0/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http
On 04/04/07 05:52 pm Jim Lux wrote:
Just saw the ad in QST for the new radio. When will it go on sale?
I've just looked through the April QST again without seeing anything
about an SDR-5000. There doesn't seem to be a FlexRadio ad at all.
I have been informed in a personal e-mail that the
://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070404/33e499a0/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http
at: dxc.k3nc.com
Devoted to Dogs: How to be your dog's best owner
Great Dog Book at www.abrohamneal.com
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070404/33e499a0
Bob Maser [EMAIL PROTECTED] wrote:
(04/04/2007 19:23)
Why doesn't a Diamond member of ARGL scan the ad and put it on the
reflector for all of us lesser guys to see? They probably called it the
5000 because it going to be 5 times as much money.
Bob W6TR
If they have the money to be a
Now now John. The president of ARRL is a proud SDR-1000 owner and a
reader of this group. He and the technology task force and CTO for the
League have been staunch supporters of SDR and its implications. The
SDR-5000 is no longer a real secret. I suspected it would not be a
secret from
Thinkpads (and some other IBM computers) used 3A8 for the LPT1 printer port
address. Most other comptuers use 378 as the LPT1 base address. I used to
use a lot of Thinkpads for programming while using the parallel port, and I
had to put in the option for which base address to use. I still have
Did that QST issue come out on April 1?
John
KK6IL
Jim Lux [EMAIL PROTECTED] wrote:
At 01:30 PM 4/4/2007, Philip Covington wrote:
On 4/4/07, Alan NV8A [EMAIL PROTECTED] wrote:
On 04/04/07 03:35 pm I wrote:
Just saw the ad in QST for the new radio. When will it go on sale?
was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070404/6af3e37b/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link
/flexradio_flex-radio.biz/attachments/20070404/d11cc2db/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex
...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070404/e5580b57/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link
What? No response from Flex?
I smell a rat!!!
(I didnt say I smell like a rat)
Stan
AH6JR
On Wednesday 04 April 2007 12:03 pm, Alan NV8A wrote:
On 04/04/07 05:52 pm Jim Lux wrote:
Just saw the ad in QST for the new radio. When will it go on sale?
I've just looked through the April QST
Guys I can't let this go by, The American Rat Race League is the only voice
of Ham radio. I am a life member cause it was only a couple of hundred
dollars in the 60's when I became one.
Please let it be known that the League has their own agenda, members.
They also play the same tune as the
25 matches
Mail list logo