I was able to 'drop' my qsx frequency right on top of the panadaptor station
that A24SL just worked.
-
Answers: $1, Short: $5, Correct: $25, dumb looks are still free.
-
Bill H. in Chicagola
>
> > Denel (Pty) Ltd is neither liable for the proper and complete
> > transmission of the information contained in this communication nor any
> > delay in its receipt.
> >
> > This message should not be copied or used for any purpose other than
> > intended, nor should it be
Is the transmit profile supposed to change when the selected mode changes?
Jim - W4YXU
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/fle
At 11:29 AM 7/17/2007, Bob Tracy wrote:
>Jim,
>
>I'm currently working on just that. The next version "CAT" will use both
>TCP and/or virtual ports and have a bridge between the two. The prototype
>code runs fine but needs a lot of work before it's ready for prime time.
>
>Bob K5KDN
What's the
Jim,
I'm currently working on just that. The next version "CAT" will use both
TCP and/or virtual ports and have a bridge between the two. The prototype
code runs fine but needs a lot of work before it's ready for prime time.
Bob K5KDN
-Original Message-
From: [EMAIL PROTECTED]
[mailto:
It is my understanding the F5K is in a smaller box than the F5KC,D Also it
gets one source of heat in the box
8:00? 8:25? 8:40? Find a flick in no time
with the Yahoo! Search movie showtime shortcut.
http:
How much of an ordeal would it be to add a CAT interface that uses a
TCP socket instead of a (virtual) serial port? Perhaps just
listening on a UDP port (or TCP, I suppose).
James Lux, P.E.
Spacecraft Radio Frequency Subsystems Group
Flight Communications Systems Section
Jet Propulsion Laborat
munication nor any
> delay in its receipt.
>
> This message should not be copied or used for any purpose other than
> intended, nor should it be disclosed to any other person.
>
> ***
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> http://mail.flex-radio.bi
My power supply is a switched one ... This afternoon I borrowed a
"normal" PS and the spectrum looks a lot cleaner ... a few spikes here
and there
Have a look on that page again, there's a picture of how it looks now
... Is this normal ? with those spikes still there ?
When pressing the SR
>FlexRadio mailing list
>FlexRadio@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>FlexRadio Knowledge Base: http://kb.flex-radio
Tim Ellison wrote:
> I tried calling them all afternoon yesterday. Only 80% of the calls
> actually resulted in the phone ringing and when it was answered, they
> could not hear the caller.
There's a note on the webpage about their problems with the phone
system. Apparently it's being worked on.
http://dkc3.digikey.com/PDF/T072/2141.pdf
- Original Message -
From: "Jim Lux" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>;
Sent: Tuesday, July 17, 2007 8:59 AM
Subject: Re: [Flexradio] 7" TFT LCD Monitor
> At 11:43 PM 7/16/2007, [EMAIL PROTECTED] wrote:
>>ZS6AVM ;
>>
>>I been consi
Jon Maguire wrote:
> Chris, where did you get the ferrites from?
>
> Jan, where did you get the ground loop isolator? Thanks to you both.
>
A couple from Radio Shack and a few from a local surplus store.
Skycraft Parts in Winter Park, Fl. The ones from Skycraft would fit snug
around the cables I wa
On the FlexRadio Fourm there are some posts with people suggesting hooking up
the Heil Classic Pro directly to the sound card. I'm wondering what the best
way really is. I'm using a Delta 44 sound card and am getting the Heil FS-2
foot switch. Currently I do not have it plugged in since it need
Chris, where did you get the ferrites from?
Jan, where did you get the ground loop isolator? Thanks to you both.
73... Jon W1MNK
Chris Maukonen wrote:
> jan wrote:
>
>> Hi,
>>
>> I've been using my sdr1000 for a few months now, but I can't seem to get
>> rid of some humps in the spectrum.
>>
jan wrote:
> Hi,
>
> I've been using my sdr1000 for a few months now, but I can't seem to get
> rid of some humps in the spectrum.
> I've read that the 11khz signal is normal, but I also get some other big
> humps. They occur when I connect my output audio from the sdr into the
> breakoutbox
> o
At 11:43 PM 7/16/2007, [EMAIL PROTECTED] wrote:
>ZS6AVM ;
>
>I been considering building my SDR-1000 into a "stand-alone" unit,
>an all in one box (SDR, PC, and a 7" TFT LCD Monitor)
>I have tried locally to find a 7" TFT LCD Monitor which is VGA
>compatible, in other words can be used with a PC
FYI,
I tried calling them all afternoon yesterday. Only 80% of the calls
actually resulted in the phone ringing and when it was answered, they
could not hear the caller.
I used three different networks to place the calls and the problem still
existed, so the issue is definitely on their end.
Us
ended, nor should it be disclosed to any other person.
>
> ***
>
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> http://mail.flex-radio
after a lot of attempts and investigations, it seem that PWSDR will not
report to DXLabs Commander, that DIGU should be RTTY-R.
DIGL does indeed report to Commander that it is in RTTY mode.
I just wish to ask the readers if they have found a way before I make this a
'Feature Request'.
I have co
Gerd:
This is just one of their eccentricities. Steve just hates being
bothered on email and Sandra does the phone. I can't remember who it
was that emailed me to say the web site still says closed. REFRESH YOUR
CACHE. In bold letters, and red font, right below DEMI banner, it says
LIVE O
Hi,
I've been using my sdr1000 for a few months now, but I can't seem to get
rid of some humps in the spectrum.
I've read that the 11khz signal is normal, but I also get some other big
humps. They occur when I connect my output audio from the sdr into the
breakoutbox
of the delta 66. I've tried
why not to think as well on an option psu internal one for the 5000 ?[for EU/US]
vy73
and all the best
Elan g0uut
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070717/83b4d7f4
why not to think as well on an option psu internal one for the 5000 ?[for EU/US]
vy73
and all the best
Elan g0uut
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070717/797f97cc
Hi Bob and Mike,
thanks for your help. I will try to call them.
However it is a little strange that they do not have an email address.
For German (and other overseas) customers it is important to know the
shipping costs as they can easily be equivalent or higher than the value of
the ordered equip
disclosed to any other person.
***
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070717/683d51fd/attachment.html
___
26 matches
Mail list logo