Bob,
These are very good points to make. SpeedStep is a BIOS configuration
option with my motherboard and the default setting is OFF. For laptop
users, where heat and power consumption are concerns, the default may
not be OFF.
Another thing to watch out for is spread spectrum BIOS setting. I
re
For those who are using Laptops for your SDR radio computer, I wanted
to give some warnings. I looked for, and could not find, any reference
to SpeedStep or CPU Throttling in the help pages on the Flex site so at
the risk of being repetitive, I will make a possibly controversial post
here.
In my previous message I meant to say Audacity instead of Audigy
Sorry,
AL, K0VM
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio
Your observation may not coincide with mine due to hardware/software
variations.
1. These clicks are most easily observed with a steady tone.. With Mixw
use TX tune Observe the noise floor on the panadapter in the TX
passband while listening slightly off frequency with a second receiver.
If you use a Virtual Radio
and virtual antennas
Do you get virtual qsl cards
that are virtually creditable
for virtual Honor Roll?
-
The longest sentence in the English language is "I do."
-
- Original Message -
From: "Gerald Capodieci"
>" ...otherwise unsightly real antennas..."
I'm sorry, I don't understand this concept ;)
Pete,
N3EVL
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/li
I never upgraded the PreSonus Firebox firmware for 96K sampling
because my computer was too wimpy to use it anyway. Wimpy computer
is gone. Bruiser computer is ready. But ...
Does the Firebox really work at 96K or should I just forget it?
That procedure that must be done at PreSonus sta
Sure, as long as you are transmitting around 60 Hz.
The big, iron transformer on the pole outside doesn't
pass much HF. If you could couple to the primary
side, you might get a little.
I was Up Nort in the Michigan farmland and there was
a power line that ran through the fields on wooden
poles.
Tim Ellison wrote:
> I agree with Lee. It is soo much more improved. I
> usually keep SR turned off on the FLEX-5000A
>
>
> -Tim
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Lee A Crocker
> Sent: Monday, September 03, 20
Bob Tracy wrote:
> Ed,
>
> You should know that they only come in two sizes: too small and too large
> :>)
>
The hast is one size fits all (adjustable). It is a fantastic hat.
Easily one of my best ball caps. The shirt is XXL and that may be too
large for a couple of you. I for one am wea
Ed,
You should know that they only come in two sizes: too small and too large
:>)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Edward J White
Sent: Monday, September 03, 2007 3:23 PM
To: John P Basilotto W5GI; Reflector
Cc: 'Sales'
Subject: Re: [Flexradi
-radio.biz/attachments/20070903/6abd50bf/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
ll should be happy. Using them would certainly round out the
>concept of a virtual radio and eliminate otherwise unsightly real antennas.
>-- next part --
>An HTML attachment was scrubbed...
>URL:
>http://mail.flex-radio.biz/pipermail/flexradio_flex-radi
---
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070903/1558d08a/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
thanks
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
Flex
I agree with Lee. It is soo much more improved. I
usually keep SR turned off on the FLEX-5000A
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee A Crocker
Sent: Monday, September 03, 2007 12:24 PM
To: Flexradio
Subject: [Fle
attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070903/5f97d51c/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
In message
<[EMAIL PROTECTED]>,
Charles Greene <[EMAIL PROTECTED]> writes
>Hi,
>
>Does anyone know where I can buy a softrock , or softrock lite or
>similar board? I want one that covers, or that I can modify to cover
>4.9 MHz +/-. I found some in UK for 160 - 30 meters, but is there a US source
The spurs have been virtually eliminated in the Flex 5000
73 W9OY
Need a vacation? Get great deals
to amazing places on Yahoo! Travel.
http://travel.yahoo.com/
___
Knew I saved it in a safe place.so safe I couldn't find it. duh!
-
Canada Bill Jones's Supplement: A Smith and Wesson beats four aces
-
Bill H. in Chicagoland
webcams at http://76.16.160.1
Hi,
Does anyone know where I can buy a softrock , or softrock lite or
similar board? I want one that covers, or that I can modify to cover
4.9 MHz +/-. I found some in UK for 160 - 30 meters, but is there a US source?
Chas
___
FlexRadio mailing lis
How do I figure out my shipping sales order from the number below on the
email I received when I ordered.
I can figure out the date part 2007 06 12
But I sure hope the 203454 part isn't an indicator of expected deliver of
2032 5 4
As I may not be working much ham radio at that date.
FlexRad
There may be some confusion caused by the fact that the website and the
email give 2 different results for anticipated shipping schedule for
the Flex-5000
as of 1550 UTC Sept 3, 2007:
Column1 Column 2
Order # Ship starting week of
Website:
895-995 Sept 4
996-1056 Sept 10 [typo showed 89
> I can confirm what FireBrick is reporting. I on occasion see the
baseline
> jump on the panadapter display but have observed no audible "tick" nor
have
> I had anyone report any anomaly on my signal at the distant receiver.
I do
> not normall use the waterfall display on the SDR-1000 but I do use
Thanks for the update John,
I know a lot of people will appreciate it.
Looks like 2nd wk in October for me.
Dave
Wo2X
- Original Message -
From: "John P Basilotto W5GI" <[EMAIL PROTECTED]>
To: "Reflector"
Cc: "'Sales'" <[EMAIL PROTECTED]>
Sent: Monday, September 03, 2007 10:12 AM
Subje
>
>
>
>The C-model will begin shipping in late Sept.
>
>
>
>
>
>
>
>John P. Basilotto
>W5GI
>Marketing and Product Manager
>FlexRadio Systems
>512-535-5266
>
>
>
>-- next part --
>An HTML attachment was scrubbed...
.com/Products.aspx?topic=ProdStatus
-Tim
FRS KB Administrator
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070903/ab79d32d/attachment.
-535-5266
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070903/6abd50bf/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
Hi,
maybe you have a noise generating optical mouse.
I experienced noise problems with an optical mouse.
I tried a different one and the noise was gone.
73 Gerd, DJ8AY
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/
29 matches
Mail list logo
