I think that would probably require that components (rx1, rx2, tx)
inside the 5000A box be separately addressable on the firewire bus,
and that PowerSDR had the capabilty to target them separately. I
don't think the software is there yet, but I might be wrong. And we
won't have that second rece
Once again, demonstrating the point that contesters are driving so
many of the interesting SDR challenges...
Duane - N9DG wrote:
> Has anyone else pondered the feasibility of running one
> session of PowerSDR on two separate computers with both being
> connected to a single 5000A HW box??
Most o
Has anyone else pondered the feasibility of running one
session of PowerSDR on two separate computers with both being
connected to a single 5000A HW box??
I'm thinking that such concept could be useful in an
Unlimited Multi Op contest category. One operator would be
the "run" operator and the oth
nger can transmit.
> Switching back to 1640 restores the transmitter.
> -- next part --
> An HTML attachment was scrubbed...
> URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.
> biz/attachments/20071008/b
I missed what to do with upgrades above 1640. I no longer can transmit.
Switching back to 1640 restores the transmitter.
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071008/b72ba6ae
After some suitable clowning around with the new rig, I cracked the
Burundi DXpedition on 40 meters just now (still using the HF2V).
An all time new one for me. The new amplifier hookup/setup helped even
though I wasn't running a full KW or anything of the sort. More like
150 watts maybe.
Bu
Gang
> Have found a problem with the FLEX-5000A Manual Version 1.10.0 All the
> pages in the table of Content are incorrect.
> Ed
> WA3BZT
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex
I am running the PowerSDR with the Edirol sound card on Windows Vista.
Everything is running very good.
With all the cpu comments on the reflector , thought i would try something.
I have 3 differant cpu indicators running , pretty cool - Hi
Please click link for picture.
http://www.flex-radio
At 11:23 AM 10/8/2007, Eric Wachsmann wrote:
>I suspect that what you are seeing is a difference between the PDF page
>number and the page number on the footer of each page. Please confirm
>whether this is the case.
One can make Acrobat generate the correct pagination to match the "on
page" page
I suspect that what you are seeing is a difference between the PDF page
number and the page number on the footer of each page. Please confirm
whether this is the case.
Eric Wachsmann
FlexRadio Systems
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz]
The wave file recorder is (unfortunately) unaware of the IF at any setting.
This is why it comes up off center. The DSB signal makes me think that
perhaps you are recording post processed audio (or 'just plain audio' as
opposed to 'I/Q audio'). Take a look at the options menu form on the Wave
rec
I'm not sure exactly how you have your audio routed, but between the regular
volume controls (AF, RF, etc) and the VAC controls, I believe we should be
able to find something that works. Note that there is a specific TX AF
control on the Setup Form -> Transmit Tab.
Eric Wachsmann
FlexRadio Syste
DUH...you have to turn up the TX gain on the Digital Specific controls on
the front control panel.
I tested the unit again with a lower reading watt meter and found a small
amount of RF going out.
Then I boosted the TX gain control and "voila" have output.
Band conditions are so bad at the moment,
I cannot get my SDR-1000 to transmit on digital.
It receives, the rig will key up, and a signal is showing on Hamscope, but
there is no drive to the radio nor RF out.
My setup is:
Edirol, VAC, NV8Com, TRX Manager as logging program that Hamscope uses to
key the rig.
I have tried the same thing wi
lem.
Dirk
W9QA
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071008/4947731b/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
htt
Oops (wiping egg from face).
Thanks for spotting - will correct.
73 de Joe - AB1DO
- Original Message -
From: "Edward J White" <[EMAIL PROTECTED]>
To: "SDR-1000"
Sent: Sunday, October 07, 2007 17:21
Subject: [Flexradio] FLEX-5000A Manual
> Hi Gang
> Have found a problem with the FLEX
16 matches
Mail list logo