I have been chasing some RFI here that appears every 56.746 KHz (Average
from 35 samples) over the entire spectrum from 80M up thru 10M. The source
is still un-identified after weeks of searching. It is there 24 hours a day,
7 days a week and ALWAYS is on the frequency of that rare one!
This morni
s scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071018/b349dbbc/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive
Dang! I wish I could send an attachment thru the reflector. Using Amadeus
Pro, I recorded the signal and then ran it through Amadeus' analytical
utilities. It may be an artifact of the interference I have been chasing, a
short burst that sweeps down frequency until it hits the 9KHz spike (Zero
freq
As of right now, I am thoroughly broken on RTTY. I think it is because
we implemented some fixes to make RTTY contesters happy.
1.10.2 worked fairly well, but actually was partly broken for PSK. I
didn't run it long enough to sort it all out, but I could make it work
without too much fuss.
T
You can use the Forums and add attachments to your posts. The permitted
types are: .gif, .bmp, .jpe, .jpeg, .pdf, .doc, .rtf, .png, .txt, .zip,
.xls, .jpg, .ascx, .css, .aspx, .rar,
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim, W4ATK
Sent:
Larry,
Open the Setup menu on PowerSDR. Go to CAT control. Click on the box
that says " DigiU/L returns LSB/USB". This "undoes" the RTTY digi mode
"fix".
And while I am on the subject, a real implementation of FSK and FSK-R is
desperately needed in addition to the ASFK (USB/LSB) digital modes
Not to mention Mike that Enforcement of this plan would be a nightmare.
The ARRL and their plan are a joke.
What's wrong with the plan that we have?
I roll around the bands and don't even hear that many stations on the
air from 10 meters to 160 meters yet we always have a bunch of want to
be cops
epage: http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071018/a806a3df/attachment.html
___
FlexRadio mailing
I operate the Antenna Selection is 'Expert' mode
This way it switches my antennas automatically from antenna port 1 (HF
Yagi/Dipoles) to antenna port 3 (6meter Halo) when I select bands from the
PWSDR Mode buttons.
But what I am seeing is:
I set the Antenna Selector to enable the TX1 switch to k
://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071018/716930c2/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail
ble,
Monitor.
Hope this helps.
73, Guido
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071018/42357df9/attachment.html
___
FlexRadio mai
Hi Christos and all
Bingo! I solved my pin 1 problem by eliminating all ground connections on one
side of the cables from SDR1000 to the pc: microphone, line in/out to Delta 44
and USB cable, leaving only one thick cable from sdr-chassis to pc-chassis. The
echoing has totally gone. In order to
/20071018/40c31351/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http
I need your assistance.
I noticed what I think is a problem with my 1 yr old SDR 1000
that I never noticed before. It was actually brought to my attention by
another ham.
I hear a continuous tone off my main frequency (displaced equivalent of my
sidetone).
I have sent the rig back to the mother
14 matches
Mail list logo