Hello John, The Flex 5000A was returned yesterday by UPS with tracking
nr1ZA8298W42981382,
well packaged insured. They say it will arive in Austin Monday.
After redoing the manual to a booklet one could hold I got some advice
which was mostly cautions and
caveats.They made me wary to the
Hi all
I would like to connect my Heil HC-I Icom mic to the flex 5K – is there a
simple way of doing this or is it just not practical?
TIA
Charlie GI4FUE
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.0/1343 - Release Date:
Charlie,
The Icom rigs use a condenser microphone which requires a DC bias supply on
the mic line. The Heil iC elements are also condenser elements for
compatibility with the Icom mic input circuits and therefore also require a
bias voltage. The Heil iC elements are NOT compatible with the
I need to use one of the new slider controls in CC to adjust the Line-In
audio level on a Flex-5000A. The command for this control requires a
polarity of +/- be inserted into the string ahead of a 3 digit decimal
number. The value range can be from +048 to -128. A typical CAT command
would be
Sorry, I sent this to the wrong group...Please ignore.
73,
Steve K5FR
-Original Message-
I need to use one of the new slider controls in CC to adjust the Line-In
audio level on a Flex-5000A. The command for this control requires a
polarity of +/- be inserted into the string ahead of a 3
Steve,
I think we actually changed this so that the upper limit is 0 (instead of
+48). This was due to some audio characteristics that degraded dramatically
when using values above 0. I'm not sure whether K5KDN has already updated
the CAT interface (and docs) to address this or not, but I would
Hi Gang:
Will there be a gathering of the Flexers at the Timonium, MD hamfest?
What time?
Ed
WA3BZT
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Sorry, Steve, it didn't occur to me that negative values would be required;
I'll extend the sliders to support them...
73,
Dave, AA6YQ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Steve Nance
Sent: Wednesday, March 26, 2008 12:28 PM
To:
Eric,
I sent this to the wrong list, it should have gone to the DXLabs group. Dave
Bernstein added some slider controls to his Commander rig control software
and the controls don't handle negative numbers. This is a Commander issue
and not a problem for Flex.
I checked a few of them and I
The new svn 2098 breaks the split vfo scroll option.
It says it will only work if red crosshairs are visible.
It does, for about 3 scrolls
But then it stops working
Even though the red cross hairs are visible it no longer scrolls vfo b but
reverts to vfo a
I've repeated this a couple of times.
10 matches
Mail list logo