Hi all just got an email back from some one that can read, LOL.
The firewire card I have found has the chip markings of
TI TSB82AA2
its a texas instrument chip it has firewire 800 (two external plugs) and
400 as a single external and one internal.
Has anybody used this chip based firewire
Firewire 800 only has native operating support with Win7, which by the way is
the primary reason that there are problems with Win7 and Firewire with a lot of
products in addition to the FLEX-x000 SDRs.
To get that adapter to work on a different operating systems, you will have to
use a vendor
--- On Wed, 11/18/09, dan edwards w...@att.net wrote:
From: dan edwards w...@att.net
Subject: Re: [Flexradio] 64 bit pci-x firewire card
To: Tim Ellison telli...@itsco.com
Date: Wednesday, November 18, 2009, 1:17 PM
paul
my pci x a/b firewire card did not play with win7 32 bit and
Try out this TI card at NewEgg. Works well on XP and Win7. Low cost low
profile design.
http://www.newegg.com/Product/Product.aspx?Item=N82E16815158038
Joe-WC4R
www.wc4r.com
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf
I tried one under XP and could not make it work. I would go with the tried
and rue Startech 1394MP.
Neal Campbell
Abroham Neal Software
www.dxbase.com
www.abrohamnealsoftware.com
www.sdrsystems.com
(540) 242 0911
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug
I have just built a new Computer here and have installed both operating
systems so I could do some testing, I have some interesting results.
Here is my setup
ASUS P5WE Pro mother board
8 Gig Ram
Quad DuoCore Q9550 CPU
750 Gig Hard drive set up for dual boot with a shared Data partition.
The
Gerald Youngblood wrote:
I purchased a Gateway SX Series Core 2 Quad this weekend with 64-bit Windows
7. Last night I loaded the PBPAL beta and it came up and ran after loading
the PAL firmware for the FLEX-5000. The only problem I had was that the
audio was stuttering. I changed the driver
Alan NV8A wrote:
Gerald Youngblood wrote:
I purchased a Gateway SX Series Core 2 Quad this weekend with 64-bit
Windows
7. Last night I loaded the PBPAL beta and it came up and ran after
loading
the PAL firmware for the FLEX-5000. The only problem I had was that the
audio was stuttering.
Just got a new 27inch iMac i7 machine. Windows 7 will not YET work in
bootcamp. There will be a fix before the end of December.. likely quicker. So
anyone trying tou se Windows 7 with the iMac and Snow Leopard OS .. don't get
fustrated if it won't install.
Mike VE3BGE
I have it working on my macbook pro I am using it while I type this note!
73
Neal Campbell
Abroham Neal Software
www.dxbase.com
www.abrohamnealsoftware.com
www.sdrsystems.com
(540) 242 0911
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to
That's interesting it's likely true in my case because the iMac I am using is
an i7 intel iMac and not a core duo?? The info was given to me by Apple .
- Original Message -
From: Neal Campbell
To: Michael
Cc: flexradio@flex-radio.biz
Sent: Wednesday, November 18, 2009 4:50
Neal - Are you running Win7 in Boot Camp or in Parallels on your Mac
Book? The new version of Parallels (version 5) is supposed to be FB
for Win7.
73,
Bill
AB4BJ
http://www.ab4bj.com
Quoting Michael freem...@rogers.com:
That's interesting it's likely true in my case because the iMac I am
Boot camp (and I have brought the boot camp partition up in Parallels 5 with
no problems).
Neal Campbell
Abroham Neal Software
www.dxbase.com
www.abrohamnealsoftware.com
www.sdrsystems.com
(540) 242 0911
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email
I have a slight problem the machine has only one standard pci which I
was planning on using for the audity sound card, which leaves free one
4x pci-e slot and the 64 bit pci-x slot, the 16x pci-e has the video
card in it.
I could just forget about the sound card and use the onboard one which
I need some Flex'er help with digital mode using the DM780 program. I
currently use the
MixW program, but would like to try the DM780 (v5.0 b2321)). However, I
cannot
get it to recognize my audio input. I have tried my VAC cables (which works
fine
with MixW) and the Flex audio port. Nothing seems
Ok maybe I miss understand, I though the soundcard for listening or what
ever it needs it for had to be on the compatibly listing, cool can just
use the onboard sound, sweet I am happy.
There seam to be a miss understanding on the operating system on my pc,
currently I am running XP with no
Paul
You have a lot of the same question I had while I was setting my PC up
before my I got my 5000a
I am using Win 7 64 and have an Onboard TI Chipset that works fine for
both XP and Win 7.
I also purchased a 1X PCIe card that's on the known to work list in
the knowledge base it has 2
Val,
I am using pretty much the same setup that you are using. HTD does not need
to be running to use DM780. I have been using com0com; however, I just
switched to VSP. You might make sure you don't have the input and output
for the soundcard settings in the program options.
Allen - W9ON
I Hooked up the F3K tonight and found that it is astounding! It appears to be
equal to the F5K in my eyes; howeer, the F5K has a built in antenna
configuratin system that the F3K does not have. The instructions that come
with the radio are very clear and it was a simple process to get it
Leon
It works for me also with Windows7 (32 bit) and VAC4.09 and also on
WinXP-pro (32-bit).
John
--
Message: 5
Date: Tue, 17 Nov 2009 16:12:23 -0700
From: David Beumer W0DHB d...@w0dhb.net
Subject: Re: [Flexradio] Easu pal
To: Leon n...@cableone.net
Cc:
20 matches
Mail list logo
