While reading the owners manual pdf for the Flex 1500, I saw that the Tx output
power can be displayed in PowerSDR. Is it also possible to display the
reflected power/SWR?
Another question that is not clearly (to me at least) answered is can transmit
be disabled so that I can use an unmatched r
Thanks Gerald et al. Turning off the NB did the trick.
So..because the NB operates over the entire bandwidth..I don't fully
understand why that would make the noise floor jump due to strong adjacent
signals. Sorry I am sometimes slow on the uptake.
Mark Lunday, WD4ELG
Greensboro, NC FM0
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http
Yes did you not read the emails regarding 1500 delivery's that came
through a couple hours ago?
(ya know, the one where the guy went off the deep end on a public
forum and now looks like a real A hole:-)
Radios that were ordered last fall are being shipped/delivered right now..
w9Ray
wa3
Yes, they are shipping in volume. See the FlexRadio homepage
http://www.flex-radio.com/
There was a bit of a driver issue that came up after Dayton that had to be
fixed before shipping could start.
Gerald made an announcement that FLEX-1500s purchased at Dayton should ship by
the end of the m
I am knew to this group so I apologize if this information has already been
posted here, I was wondering if the regular shipments of the Flex 1500 have
started yet. I purchased on on the first day of the Dayton Hamvention. At that
time, it was said that the radios would be going out around Jun
Mark,
AGC operates only on the final filtered bandwidth so pumping from other
signals does not make sense. Do you have the noise blanker turned on? That
might do it since it operates on the entire bandwidth.
Gerald
Gerald Youngblood, K5SDR
President and CEO
FlexRadio Systems(TM)
13091 Pond Sp
SDR 1.18.5 (have not had time to upgrade yet), F3K.
IARU HF championship. I notice that with a lot of strong signals, it seems
to be overwhelming the AGC. I have the preamp off, ACG settings don't seem
to matter and neither does the AGC-T setting. The symptom is that the
background noise seems
On Sat, Jul 10, 2010 at 3:05 PM, Larry Lecrone wrote:
>
>
>
>
>
>
>
>
>
>
>
> yes this cable is xlr to 8 pin ...so you have to buy adm 718 ym to
> connect it to the modual connector on the F3K...DO NOT BUY THE AD1YM...it
> will NOT WORK. Also if you own a pro set headset and you have the Heil
i see many people keep buying the heil
there is to many mic on the market that will do 10 time better job ,i have the
pr 40 pr 781
i found that the pr 781 have more low to the pr 40 , then i use the Roda
procaster
cost around 110 euro in the eu this is as good as re27 electro voice i test
thi
yes this cable is xlr to 8 pin ...so you have to buy adm 718 ym to connect
it to the modual connector on the F3K...DO NOT BUY THE AD1YM...it will NOT
WORK. Also if you own a pro set headset and you have the Heil pro set adapter
for the Y buy a XLR cable to stero plug will work
They seem to be despatching in the order the orders were placed
my flex1500#1 was ordered 14 Oct 2008 cc notification jun 23 2010 received
jun 30 2010
my flex1500#2 was ordered 18 Oct 2008, Julie confirmed I really did want a
2nd one july 7 2010 should be here july 13 2010
Dave
ww2r
--
Yes, that is the only advantage. It gives you the full panadapter bandwidth
with the IF at the center.
Gerald
Gerald Youngblood, K5SDR
President and CEO
FlexRadio Systems(TM)
13091 Pond Springs Road, #250
Austin, TX 78729
Phone: 512-535-4713 Ext. 202
Email: ger...@flex-radio.com
Web: www.flex-r
Bob:
The answer is "it depends."
The selection of the "transverter output versus PA output" is independent of
the transverter table operation.
BUT...
the Amateur Band frequency checking is active anytime you are operating on
the 5W PA output.
(FCC requirement.)
So, using the standard radio, yo
Gerald,
Is the only advantage of doing this centering the carrier in the panadapter?
Thanks.
George
W2GS
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz]on Behalf Of Gerald Youngblood
Sent: Saturday, July 10, 2010 9:01 AM
To: DL1FUX
Cc: fl
I set mine to +/- 200 Hz (depending on sideband in use) and turn SR off.
That works fine on all modes until you flip sidebands so that you need to
reverse the sign of the offset. We are planning to make this automatic in
an upcoming release.
Gerald
Gerald Youngblood, K5SDR
President and CEO
Fl
Dear Hulen,
I can assure you that we are shipping in the date sequence of the sales
orders entered into our accounting system. There are several possible
administrative reasons that this could have happened. I have copied Julie
in our shipping department so she can contact you on Monday regardin
On Sat, Jul 10, 2010 at 6:54 AM, Hulen Smith wrote:
> I just read a post where folks are getting their Flex-1500's after having
> only ordered them since Jan of this year. What the hell is going on guys? Is
> this true? I've been with Flex since just after the 1000 got it's enclosure.
> What ever
Hi Martin:
Setting the IF to zero will work fine with SSB and CW, but you find that the
radio
will no longer receive AM, since the central carrier will fall on the
"zero".
So, if you do not care about AM, then OK.
Otherwise setting it to 500 Hz, or 3 kHz or 5 kHz is a suggestion.
--- Graham / K
Hulen,
I recommend that you give the folks at FlexRadio a call on Monday and see
exactly what the situation is regarding your order status. I am sure it is a
paperwork or other mishap.
On the other hand, Gerald has stated that all of the FLEX-1500 orders placed by
the end of May would be proc
On Sat, Jul 10, 2010 at 12:31 AM, wrote:
> I have just installed and configured fldigi using VAC as the soundcard to
> powerSDR and the rigcat interface. It works fine on PSK31 and rtty but have
> not been able to decode mfsk signals. I wondering if there are others using
> it through VAC for doi
Hi,
PSDR 2.0.x is set tu IF 9.000 kHz.
The additional paper to the Flex 1500 says you can set it to 5.000 kHz
to move the red carrier-line more to the middle of the panadapter.
If I set it to 0 kHz it then IS in the middle. Why not set it to 0 kHz?
Is there any problem with this?
73, marti
I just read a post where folks are getting their Flex-1500's after having only
ordered them since Jan of this year. What the hell is going on guys? Is this
true? I've been with Flex since just after the 1000 got it's enclosure. What
ever happened to first come, first serve? If this is true, if t
23 matches
Mail list logo
