John,
If there is no power out in Tune, have you tried resetting the database?
When the TX stops, try the database first..
73,
Dudley
WA5QPZ
FlexRadio Systems
(512) 250-8595, Option 2
Email: dud...@flex-radio.com
Web: www.flex-radio.com
"Tune in excitement!" ™
On Sat, Oct 23, 2010 at 1
I do hear a tone when I tune, but there is no output. I can hear the
dots and dashes from my bencher, but again no power out. The drive
level is set at 75W and the Tune level at 10W.
Any ideas what could be wrong?
(Using F5K with RX2 and antenna tuner. Running V 2.0.8)
John,
Is there a step by step on how to set this up for Flex 3000?
Best Regards,
Larry Andrew W0LEA
L. Andrew Photography
Kansas City, Missouri
www.andrewphotography
816 392-8288
I have been asking for several years to get the ID'er added.
But in the meantime,
I'm kind of thinking that powersdr isn't going to be complete until it merges
with something like mixw.
Sent from my iPod
On Oct 23, 2010, at 4:53 PM, jim howard wrote:
> I use the RoMac IDer while on SSB. Works great.
>
> Jim K5TC
>
>
>
> ___
>
I use the RoMac IDer while on SSB. Works great.
Jim K5TC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-rad
Thanks so much! Another laptop model with good results!
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394
On Sat, Oct 23, 2010 at 5:11 PM, David Kennett wrote:
> Hi everyone! I’ve had a Flex 3K for well over a year, and have gained much
> from the reflector,
Hi everyone! I’ve had a Flex 3K for well over a year, and have gained much from
the reflector, but just now joined so I could relate my experience.
I must be pretty lucky, since my initial PowerSDR install went smoothly on a
3GHz, Via FW, Asus MB. I even got it working on an old Toshiba 900 MHz
Paul,
The I/Q can be passed at 96K via VAC if this is what you need, be sure to
check box the Direct I/Q box checked in the VAC window, and that you have
the VAC Settings in the VAC console set wide enough to pass the 96K .
Same is used in with CW Skimmer.
Hope this helps.
73,
Dudley
WA5QP
I got Linrad working with the Flex5000 back in 2007 and made a webpage
detailing how to do it at that time. It is really pretty simple, and is
just as Clay describes:
http://www.nitehawk.com/w3sz/flex-linrad.html
I haven't played with it recently, and I didn't take the next step to
make it w
On 10/23/2010 11:31 AM, Brian Lloyd wrote:
On Sat, Oct 23, 2010 at 11:09 AM, wrote:
I need to have vac operate at 96000 with Flex. Flex only offers a max
sample rate of 48000 from a drop down menu on main screen. Vac is capable
of 96000. Sample rate is needed to send info to an eme deco
On Sat, 23 Oct 2010 11:31:46 -0700
Brian Lloyd wrote:
On Sat, Oct 23, 2010 at 11:09 AM,
wrote:
I need to have vac operate at 96000 with Flex. Flex
only offers a max
sample rate of 48000 from a drop down menu on main
screen. Vac is capable
of 96000. Sample rate is needed to send info to
On Sat, Oct 23, 2010 at 11:09 AM, wrote:
> I need to have vac operate at 96000 with Flex. Flex only offers a max
> sample rate of 48000 from a drop down menu on main screen. Vac is capable
> of 96000. Sample rate is needed to send info to an eme decoding program
> which requires 96000. I
I need to have vac operate at 96000 with Flex. Flex only offers a max
sample rate of 48000 from a drop down menu on main screen. Vac is capable
of 96000. Sample rate is needed to send info to an eme decoding program
which requires 96000. I talked to Greg at Dallas eme convention and
int
I need to have vac operate at 96000 with Flex. Flex only offers a max
sample rate of 48000 from a drop down menu on main screen. Vac is capable
of 96000. Sample rate is needed to send info to an eme decoding program
which requires 96000. I talked to Greg at Dallas eme convention and
int
Rich:
I assume you use the "Zoom" control, just under the panadaptor screen.
Then you can use the "Center" control next to it.
Maximum panadaptor span is approximately equal to the sampling rate, 49, 96,
or 192 kHz on your radio.
It is slightly wider with SR (Spur Reduction) turned off.
You can
Another idea for an enhancement would be to lock the DDS (as tough we were
doing a demo playback) and allow the user to move the tuning around in the
bandpass.
My guess is that this might be relatively simple via the spur reduction
code, just stop the spur reduction from updating the DDS ?
Jim -
Setting the sampling rate to 192K will provide the widest Panadapter view.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of rich kennedy
Sent: Saturday, October 23, 2010 12:09 PM
To: flexradio@flex-radio.biz
Subject:
Flex'ers,
Rig=Flex5K; PSDR=1.18; latest drivers and firmware.
Question: I wish to change the horizontal scaling of the panadapter so more
bandwidth is seen. Even at the widest (0.5) display setting I can't see the
target frequencies that I wish to view. In "setup; display" you can change
ver
Ask Neal Campbell, he posts frequently to this list and is a low DPC guru.
At 22:48 10/22/2010, Mark Lunday wrote:
Quick graphics, 8 GB RAM, lowest DPC Latency possible. Thanks
Mark Lunday, WD4ELG
Greensboro, NC FM06be
wd4...@arrl.net
http://wd4elg.blogspot.com
http://wd4elg.net
___
I am already copying WWV on 20MHz from my QTH near Sacramento and it is not
even 8AM local. Right now I am able to copy WWV on all frequencies, i.e.
2.5MHz, 5MHz, 10MHz, 15MHz, and 20MHz. I am also able to copy WWVH on 2.5-15
MHz. The carrier of WWV is -53dBm on 15MHz. I am not used to 20m being op
I'm re-posting this because the server compacted my component diagram:
Please help...N2NY will be undergoing heart surgery very soon, and I need
some direct advice to help get his Flex5000C up and running for remote
control so that he can use his station during convalesence. His station, on
a big
Please help...N2NY will be undergoing heart surgery very soon, and I need
some direct advice to help get his Flex5000C up and running for remote
control so that he can use his station during convalesence. His station, on
a big hill, is 1/2 mile from his home (which is in the valley) and he will
no
Ralph,
Not sure why it's doing that to you. I just went through the six bandstacks
I have on 15M, changing each as I went along (by 1kHz). They all remained
changed when I went back through... no reverting.
WX4L
On Fri, Oct 22, 2010 at 8:30 PM, Ralph W5JGV wrote:
> > Or, you can edit the da
Talk to the SDR PC guru
http://www.abrohamnealsoftware.com/Hardware.htm
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mark Lunday
Sent: Saturday, October 23, 2010 1:48 AM
To: flexradio@flex-radio.biz
Subject: [Flexr
checked by ESET NOD32 Antivirus.
http://www.eset.com
__ Information from ESET NOD32 Antivirus, version of virus signature
database 5557 (20101023) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
___
Fl
25 matches
Mail list logo