An even better possibility that Flex might consider is to remember ATU
settings by frequency, not just band. My SGC and LDG tuners do this and
remember the tuning parameters for the last few hundred frequencies
tuned, regardless of band. When I transmit on (or near) one of these,
the tuner
If you haven't done so, make sure you enter your wants and wishes into the
Enhancements database so that when FlexRadio starts to address the improvement
of the ATUs operational behavior, that these can be factored in as possible
requirements.
-Tim
-Original Message-
From:
Gerald has stated several times that there will be no new features added to
PowerSDR 2.0.x as it is feature complete, so no there will be no new
enhancements in PowerSDR 2.0.x. All new enhancements will have to be in a
future version of PowerSDR (2.1.x or greater).
Actually, theFLX-3000 does
Tim I see in the ATU form that different antenna profiles can be named, but
where is configuration or ATU settings remembered? And where is the recall
button?
Ted, WB2LOU
On Sat, Mar 19, 2011 at 9:24 AM, Tim Ellison telli...@itsco.com wrote:
Gerald has stated several times that there will be
Hi to all!!Anyone can help me, what is the simplest way to make my old
amplifier
run with the Flex-3000, someone told me I have to buy the ampkey(Mike, say
he currently not shipping any ampkeyers at this time) or Ameritorn
ARB-704(relay
buffers), Any one have the amp key to sale let me know.
Hugo,
The Flex 3000 can key an SB-200 directly and safely. I am doing so here. There
is no need for an external buffer. Thank you Flex for reinventing the humble
relay.
Refer to page 56 of the 3K manual for the specs.
73 - Luke
- Original Message -
From: Hugo Martinez
Sorry. I meant ot type page 6 not 56
- Original Message -
From: Luke Rainville (WebMail) k...@comcast.net
ww.flexradio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
On Sat, Mar 19, 2011 at 10:17 AM, Luke Rainville (WebMail) k...@comcast.net
wrote:
Hugo,
The Flex 3000 can key an SB-200 directly and safely. I am doing so here.
There is no need for an external buffer. Thank you Flex for reinventing the
humble relay.
Refer to page 56 of the 3K manual for
Just a quick question. How do I do Com Port Keying?
Since Power SDR 2.0.20 does not support attached paddles on the SDR-1000,
I am having difficulty in finding out how to do Com Port Keying.
I am relatively new to the Flex world. Any help would be greatly appreciated.
Also I have a 8 pin Mic
It is in the operators manual for the SDR-1000.
http://support.flex-radio.com/Downloads.aspx?id=112
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of elu...@rochester.rr.com
Sent: Saturday, March 19, 2011 2:21 PM
To:
I found the mods in 'ch 1' worked VERY well in my dad's old sb-200
http://www.xs4all.nl/~pa0fri/Lineairs/SB200/sb200eng.htm
worked very well...now I think the HV tranny is under-sized !!
FWIW, w5xz, dan
--- On Sat, 3/19/11, Brian Lloyd brian-wb6...@lloyd.com wrote:
From: Brian Lloyd
Thanks for the info Gerald. The Flex 5000 and PowerSDR are amazing. After
almost a year of use I am still learning about features that I didn't know
were available.
John, N8WNA
From: ger...@flex-radio.com [mailto:ger...@flex-radio.com] On Behalf Of
Gerald Youngblood
Sent: Saturday, March
The equipment:
Flex 1500
PowerSDR V2.019RC1
VAC is v 4.9.0.1652
Computer to the Flex Radio is an AMD Athlon 64x2 Dual Cor 3800 with 3GB Ram
Mother board is an Asus A7A266 (not particularly new)
Windows XP Pro SP3
AntiVirus: AVG
Remote computer:
Windows 7 (more than one computer - all behave the
What virtual com port software are you using? VSPmanager has problems remember
settings unless you are running under an administrator enabled account.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tom Bray
Sent:
Tom
How are you connecting remotely to your PowerSDR computer ?
If you are using remote desktop connection , be sure to set remote audio
options to Play on this computer when connecting .
Dave W0DHB
-Original Message-
From: flexradio-boun...@flex-radio.biz
Is this an Issue with RC2?
No, it isn't. If only com1 com3 show up in PowerSDR that was all the com
ports it could enumerate (what Windows told the software which ports were
available). I have bunches of com ports defined, both physical and virtual and
all show up in PowerSDR.
-Tim
On Sat, Mar 19, 2011 at 6:36 PM, Tim Ellison telli...@itsco.com wrote:
Is this an Issue with RC2?
No, it isn't. If only com1 com3 show up in PowerSDR that was all the com
ports it could enumerate (what Windows told the software which ports were
available). I have bunches of com ports
I am trying to run everything on the computer with the radio attached to it. I
sort of assumed, after playing with the remote MixW software with the THEON
package, that it was better to just let it run everything on the one computer.
I don't even care about the sound, I don't need to listen
Tom,
With the remote desktop program I use (teamviewer) , doing things at the
remote computer (not connected to the radio) is just the same as doing them
at the computer that does have the radio connected. The permissions I have
on the radio computer are the ones I have at the remote computer.
19 matches
Mail list logo