I always read, listen to other comments, make notes and then try the ideas.
When I find a combo that works for me I stick with it regardless of the
naysayers...so good for you and enjoy your set up !!! I believe your
approach is very good and worth attention.
Ted, WB2LOU
On Sat, Apr 23, 2011 at
I finally got a computer fast enough to handle my Flex radio properly and
have been experimenting with some settings. It looks like the filters work
better (sharper skirts) with bigger buffers, are there any other advantages
to having a larger or smaller buffer? I see on my Flex-1500 there is a
It seems that I'm getting some RF in my audio when using my AL811H with
5000A. I'm keying am through a little AmpKeyer device. Any suggestions on
where to put ferrites? I've used a few already bu no luck so far.
I've experienced some audio distortion in the past but that seem to be due
to over
Hello
I have had my 1500 about a month now but not much time to play around.
This Easter break I have had more time to
Look at it. I have Power SDR V2.0.22 with windows 7. The problem I have
is with the audio from the 1500. When I first
Turn on the radio then software then start
Some day we hope to get HF data from PowerSDR
so no additional logging software will be needed to switch antennas.
You have my vote, yessir.bring it on.
-Original Message-
From: flexedge-boun...@flex-radio.biz
[mailto:flexedge-boun...@flex-radio.biz] On Behalf Of Phil Theis
Rick,
What Firewire cable are you using? The 1st thing I would try is to switch
to the Granite Digital (or similar double-shielded cable). I have found
that the most susceptible area to RF is the Firewire connection. Using a
double-shielded cable, ferrite chokes on the Firewire cable, or both
OK Eddie, after yours mail the combo N1MM-FLDIGI deserve an extensive
check at all. It may be that I tried it too early with N1MM. The combo,
so N1MM, is the key. I think I have got the sense of yours mail. FLDIGI
stand alone doesn't sound to me, i tried it several times and no way to
have it
On Sun, Apr 24, 2011 at 1:10 PM, Kerry Miller kerryg...@gmail.com wrote:
I finally got a computer fast enough to handle my Flex radio properly and
have been experimenting with some settings. It looks like the filters work
better (sharper skirts) with bigger buffers, are there any other
Hi,
Just installed VAC 4.09 and went to the control panel to make the initial
settings. It comes up showing one cable and when I change the setting to two
cables and press set a small window pops up saying Cannot change device
property (0/5 - access is denied) and accepting this message
Sounds like a permissions issue or something has exclusive use of the cable you
are trying to modify.
I would suggest contacting VAC support
http://software.muzychenko.net/eng/vac.htm#support
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
Start the VAC control panel by right clicking and selecting run as
administrator.
73 - Mike WA8BXN
---Original Message---
From: William Speedie
Date: 4/24/2011 8:35:43 PM
To: Flex Radio Mailing List
Subject: [Flexradio] Problem setting up VAC
Hi,
11 matches
Mail list logo
