Re: [Flexradio] Parallel Port for F3K

Further, check where the headers go. I have a couple of boards that the header goes to chips that were not installed!! Absolutely. VERY common. You have to wonder why they went to all the trouble to engineer these ports and then make them unusable. There are lots of things that are

Re: [Flexradio] FlexRadio Digest, Vol 74, Issue 19

VOX??? I have been playing with SSB on my FLEX 1500 but can't find in the manual or any menu a VOX option. Anyone have any ideas on this or options. I use a boom Goldline Heil Mic and PTT operating is not handy and clicking MOX on and off not happy way to operate either. Carl/K5HK Reno NV

Re: [Flexradio] FlexRadio Digest, Vol 74, Issue 19

VOX is not a feature of the FLEX-1500 See the Feature Matrix for the features supported by radio type http://www.flexradio.com/Products.aspx?topic=SDR_Feature_Matrix You can connect a hand or footswitch to the FlexWire port for an alternate method of keying the radio. -Tim -Original

[Flexradio] using the flex control

Iam running 2.0.22 on XP ,I gather that I need to run 2.1 or latter,to run the flex control. I don't see 2.1.2 on the web site to down load. I did receive a cd with sdr 2.1.2 RC3. My 1500 runs perfect with 2.0.22. I hesitate to down load another power sdr version,that I don't know anything

Re: [Flexradio] using the flex control

Hi Dale If you want PowerSDR to use the knob you will have to upgrade. However, you could probably use it via DDUtil and stick with 2.0.22 (I think??) If you normally run DDU then I would try that. 73 Neal On Mon, Jun 20, 2011 at 2:57 PM, y...@aol.com y...@aol.com wrote: Iam running

Re: [Flexradio] Parallel Port for F3K

Thanks to all the suggestions. I will first check to see if there is a parallel port on the board, and, if not, will see about ordering another PP card. This may take me a month or so since I just broke my arm in a tractor accident and can only use one hand. Fortunately it is not the hand I

[Flexradio] All was well Until

I am running a Flex 5000 on Vista and everything was flawless until! I decided to setup for the digital modes. I downloaded VAC 4.09 and VSP Manager. Installation went according to instructions . I set them both up with no problem then I started Power SDR and it was all down hill from

Re: [Flexradio] All was well Until

The standard first step after such a major problem. Is Delete the database, and create a new one. That will 'probably' get you going. you will probably have to re-install VSPm first so you have some comports to put into the new database. It's been my experience that it's best to start with a

Re: [Flexradio] All was well Until

Your situation may be different from mine, but I had a similar thing happen to me once. I had to uninstall everything related to the powersdr software and reinstall which took care of the problem. You may just want to do a data base reset first. After that there are those on this list that

Re: [Flexradio] All was well Until

or been there, done that, bought the t-shirt .   as we say in Texas... 73, w5xz, dan --- On Tue, 6/21/11, Bill w...@billnjudy.com wrote: From: Bill w...@billnjudy.com Subject: Re: [Flexradio] All was well Until To: flexradio@flex-radio.biz Date: Tuesday, June 21, 2011, 1:56 AM The

Re: [Flexradio] All was well Until

with my bodynobody wants to see me in a TEE Shirt! On 6/20/11 9:08 PM, dan edwards wrote: or been there, done that, bought the t-shirt . as we say in Texas... 73, w5xz, dan --- On *Tue, 6/21/11, Bill /w...@billnjudy.com/* wrote: From: Bill w...@billnjudy.com Subject:

Re: [Flexradio] All was well Until

Tim, I guess the next question maybe what caused the need to reset to factory defaults? The VAC and VSP Manager software seemed to setup as expected but it freaked out PowerSDR. Wondering if I got something out of order while setting up. Gary - Original Message - From: Tim