All,
In talking with Dudley, I have been told that the vintage Yeasu md1-c8 desk
microphones are not completely compatiable with the front connector on the Flex
5000a. As it was mentioned that some Flex users have got this microphone to
work with the Flex. I would like to know what pin-out chan
It is here;
http://www.wb5rvz.com/sdr/ensemble/psdriq.htm
73,
Tom
K2BEW.
On Mon, Dec 17, 2012 at 5:33 PM, William Bathgate
wrote:
> What version of the current software builds supports a Softrock RX
> Ensemble II receiver? (this is with the most current Softrock hardware)
>
> Where is the loca
On Mon, Dec 17, 2012 at 4:33 PM, William Bathgate
wrote:
> What version of the current software builds supports a Softrock...
=
Bill, you can find out all about various SDR software and much more at the
Softrock SDR group:
http://groups.yahoo.com/group/softrock40/
In addition to PSDR, t
What version of the current software builds supports a Softrock RX Ensemble
II receiver? (this is with the most current Softrock hardware)
Where is the location of these builds and are there any special considerations
or instructions?
KD8IGK
Bill
___
Yesterday afternoon I had a unique experience. I worked OF9X (the Santa
Clause station) on 20M SSB. He was using a Web cam to send Video and
Audio of his operation live over the Internet. So I monitored that when
I called him and heard my own Audio echoing back with a slight delay
from his radi
Lars - I had some rfi issues using my 5000. Moving the antenna further
away from the shack and adding an rf choke at the antenna feedpoint
solved my problems.
73
Wayne
K4ELO
On Mon, Dec 17, 2012, at 02:26 PM, Lars Pettersson wrote:
> I have a Flex 5000A
> That seems to pickup RF into the mic, i
I have a Flex 5000A
That seems to pickup RF into the mic, is this a known problem?
//Lars SM4IVE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-a
Don,
I use it for switching transverters and through DDUTIL you can switch HF
antennas as well.
It simply needs a PCA9555A chip on the I2C port.
I put together a little peripheral for this purpose. I documented it at
k3tuf.com/FW.html
73,
Phil K3TUF
__
All,
I have had RF ingress issues with my Flex since I have put the radio on the
air. The issues are worse on 14 mhz and above, but can be noticed if I try to
operate very far away from resonance of the antenna.
I get RF into my transmit audio and my amplified speakers/subwoofer.
As I am usin
9 matches
Mail list logo
