All
As per the 2.6.4 release notes this release no longer supports the SDR-1000.
I knew it was likely to happen someday. In case anyone is considering
"BoatAnchorSDR"
My SDR-1000 works FB on any release prior to 2.6.4 but in this release
the button
in the radio selector comes up grayed out. I'm
Good analogy, Ray, in reverse- GM now puts the supercharged engine from the
$120,000 Corvette ZR1 in a $70,000 Cadillac. I'm hoping that some of that 6700
magic makes it into the 5000. How about a plug-in Arduino chip? Jim KJ2P>
From: k9...@rnacs.com
> To: tm.st...@verizon.net; flexradio@flex-
Tom,
They are not legacy radios. Yes, the 6000-series uses newer technology,
but the FLEX-1500, FLEX-3000, & FLEX-5000 are still current production and
are likely to remain so for the foreseeable future. As Flex has stated
before, each model fills a different niche in the marketplace. GM does
Competition is good for everyone.
Tim Ellison
On 4/16/2013 6:43 PM, ED wrote:
That's because there competion out there from INDIA
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of TM
Sent: Tuesday, April 16, 2013 5:43 PM
To: flexradio@flex-radio.b
Thanks Tim, as I suspected I just never noticed it before as I normally
change all the setting right away.
73's, Don
-Original Message-
From: Tim Ellison
Sent: Tuesday, April 16, 2013 7:01 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] 0 Beat switch
TheZero Beat feature l
That's because there competion out there from INDIA
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of TM
Sent: Tuesday, April 16, 2013 5:43 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Re V2.6.4
Tim:
Someone may already have said the sa
Tim:
Someone may already have said the same, but I for one am greatly impressed
that Flex Radio has voluntarily released an update for their legacy radios
during a time that they are also struggling to get a major, new,
company-future defining product shipped out the door. That says a lot about
t
The system clock display is take directly from thePC's clock via an OS
function call.
Try this. Turn off the PowerSDR displayand see if the clock still has
the delays. If the clock is not freezing, then you are most likely CPU
bound. If not, check your DPC latency (there is a latency checker
- Original Message -
From: David Painter
To: Mike
Sent: Tuesday, April 16, 2013 8:56 PM
Subject: Re: [Flexradio] Panadapter stall/pause ...
Mike et al,
My machine has been runnning, without problem, thru the various iterations of
PSDR for years. Sometime I run it on its own approx
Now that I've gotten started, I can't seem to stop. ;-)
Another thing that seems to get people in trouble is a persistent
misunderstanding of the proper ratio of carrier level to PEP output. If
you set the Carrier level in the Setup dialog to 25, you'll get the
proper 4:1 carrier/PEP ratio. If
I am wondering if there has been a change to the settings used for running
the Self calibration routines...?
Is it still 96khz at 1024k buffer, with Factory Default ROM info..?
Since my last calibration using that format, I have bad image spikes even
within the ham bands. While the preamp see
Hi Dudley,
My pleasure:
Flex 5000A, Heil PR781 mic into Mackie 402-VLZ3 or other cheap mixer,
roughly +3 to +6dB gain with *NO EQ* used in the mixer. (makeup gain only)
TX Filter 100-5000
Carrier 25
Mic 25
DX ON, 3
CPDROFF
PowerSDR TX EQ (ori
SDRMemory v4.2.0 has been released & is available for download from my
website.
This release contains one new feature and one bug fix.
New Feature -- If you have more than one radio, you can bypass the radio
selection form by placing the radio model & serial number on the command
line. This way
What happens when you disconnect the antenna?
On Tuesday, April 16, 2013, Mike wrote:
> Hi David,
>
> I have seen a similar problem with my Flex3000.
> Klaus@Flex EU Support and I have been working on this.
>
> I also have a "Clicking" sound at regular intervals on all bands which
> shows on the
David,
Under PowerSDR setup/CATcontrol, make sure the "Allow Kenwood AL command"
box is not ticked.
Regards,
Craig
VK0JJJ
On 16 April 2013 22:24, Mike wrote:
> Hi David,
>
> I have seen a similar problem with my Flex3000.
> Klaus@Flex EU Support and I have been working on this.
>
> I also ha
Hi David,
I have seen a similar problem with my Flex3000.
Klaus@Flex EU Support and I have been working on this.
I also have a "Clicking" sound at regular intervals on all bands which
shows on the panascope as spikes, the panadapter pauses with each "Click".
I am also running Win XP SP3 ...
Ope
I echo Jim's comment Carry the AM features over to the 6K series
Dennis KØEOO
- Original Message -
From: "Jim Barber"
Cc: "Flex Radio"
Sent: Tuesday, April 16, 2013 11:43:54 AM
Subject: Re: [Flexradio] 0 Beat switch
Bar none, the 5K is the best AM rig on the market.
Anothe
Bar none, the 5K is the best AM rig on the market.
Another great, but unsung feature is little to no ALC overshoot with the
5000A when driving a high-gain amplifier. 5 watts carrier gets me 375
watts out (1500 PEP modulated) with a pair of GU-74B tetrodes. I have to
watch the modulation to mak
This is a great feature of us AMers
Dennis KØEOO
- Original Message -
From: "Tim Ellison"
To: hmattc...@juno.com, "Flex Radio"
Sent: Tuesday, April 16, 2013 10:11:47 AM
Subject: Re: [Flexradio] 0 Beat switch
Zero Beat is a standard PowerSDR feature so it is radio independent.
On
Zero Beat is a standard PowerSDR feature so it is radio independent.
One advantage is using it when you are listening to a lot of AM stations
on the same frequency but they are all not exactly on frequency.
Tim Ellison
On 4/16/2013 10:08 AM, hmattc...@juno.com wrote:
Tim,
Is the 0 beat switc
The accuracy is dependent on the the FFT bin sizewhich equates to a few Hz.
Tim Ellison
On 4/16/2013 10:05 AM, Bob Kay wrote:
Tim
What is the accuracy suppose to be?
Assuming I use WWV, should it zero to 15.000.000?
On Tuesday, April 16, 2013, Tim Ellison wrote:
TheZero Beat feature looks
Tim
What is the accuracy suppose to be?
Assuming I use WWV, should it zero to 15.000.000?
On Tuesday, April 16, 2013, Tim Ellison wrote:
> TheZero Beat feature looks for the largest signal in the RX passband and
> tunes to it. For it to work, it requires that averaging be turned on so it
> can f
TheZero Beat feature looks for the largest signal in the RX passband and
tunes to it. For it to work, it requires that averaging be turned on so
it can find the largest signal. It has always been this way.
Tim Ellison
On 4/16/2013 7:38 AM, Don wrote:
Perhaps I just have never noticed it befo
Apologies, meant to include:
XP Pro SP3
AMD Dual Core
David
- Original Message -
From: "David Painter"
To:
Sent: Tuesday, April 16, 2013 12:53 PM
Subject: [Flexradio] Re V2.6.4
Anyone else seen this behavious in the new version.
Panadaptor appears to stall/pause regularly and m
Anyone else seen this behavious in the new version.
Panadaptor appears to stall/pause regularly and momentarily and then resume.
Mouse movements are slow and slow to catch up with movements across the
panadaptor.
Oddest one is that the clock displaying local time (seconds) will freeze for a
fe
Perhaps I just have never noticed it before but after installing 2.6.4, while
in the default screen I noticed that the 0 Beat switch was “grayed” out. As
soon as I transferred my settings I saw that 0 Beat switch was active again. I
found that turning the “AVG” switch on places the 0 Beat in ac
26 matches
Mail list logo