Has any one noticed that in V2.1.5 , the Panascope display and the Scope
display show about half the
amplitude as version 2.0 ? If you bring AGC-T way high you can get about the
same vertical amplitude as V2.0 .
73
Dan
___
FlexRadio Systems Mailing
Hi;
Recently purchased a 5000A ,I'm looking for a used factory internal tuner.
Looking for Rev 52 with BNC connectors .
73
Dan
K8ICB in Florida
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hi;
Recently purchased a 5000A ,I'm looking for a used factory internal tuner.
73
Dan
K8ICB in Florida
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Sell Heil PR 40 Studio Mic
I have a Heil PR 40 which I do not need. It is in great shape and works
perfectly , sells new for $325,Comes with a 3 foot XLR cord for Flex 5000A,
wind screen, bracket to mount it on a Mic stand . $275 includes Priority mail ,
USA only.
Paypal is best for me , email
FS Heil PR 40 Studio Mic
I recently purchased some equipment also got a Heil PR 40 which I do not
need.It is in great shape and works perfectly , sells new for $325,Comes with a
3 foot XLR cord for Flex 5000A, wind screen, bracket to mount it on a Mic stand
. $275 + $12 for Priority mail.
Hi;
Recently purchased a 5000A ,I'm looking for a used factory internal tuner.
73
Dan
K8ICB in Florida
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Hello;
I recently purchased a 5000A and would like to add a used antenna tuner.
Please email info .
73
Dan
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
I recently sold my Flex SRR 1000 , I have left over the Flex USB to Parallel
Port Adapter Cable .
Works perfectly , $60 includes USPS 3 day shipping .USA only .
Can take paypal .
73
Dan
K8ICB in Florida
Please contact email : k8...@allprophoto.net
___
Flex SDR 1000 ( Mic is 4 pin )
A friend has been collecting Flex SDR 1000 transceivers for a few
years. He now has more than he wants and asked me to sell them .
This is the last one , it has the 100 watt PA's,has all the cables
needed,has been tested on the air and works great .
SDR 1000 4
Flex SDR 1000 ( Mic is 4 pin )
A friend has been collecting Flex SDR 1000 transceivers for a few
years. He now has more than he wants and asked me to sell them .
This is the last one , it has the 100 watt PA's,has all the cables
needed,has been tested on the air and works great .
SDR 1000 4
A friend has been collecting Flex SDR 1000 transceivers for a few
years. He now has more than he wants and asked me to sell them .
All have the 100 watt PA's .Each unit has all the cables needed, each
has been tested on the air and works great .
1 SDR 1000 8 pin mic with Edirol 66 or Delta 44
I'm selling 2 SDR 1000's and 2 Griffin knobs and 3 Flex Parallel to
USB adapters on QTH.com for a friend .
Type in Flex or K8ICB at QTH.com classified and the ad will come up .
73
Dan
K8ICB in Florida
___
FlexRadio Systems Mailing List
I have a friend that would like to get a Flex for AM , I have
little knowledge of AM , last
time for me was about 1960 , so any advice would be welcome on
setting , how well it works etc .
Best Radio SDR1000, 3000 , 5000A ?
Thanks for your time !
73
Dan
K8ICB in Florida
PS: cc: emails are
Please email me if you have one for sale .
73
Dan
K8ICB in Florida
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
for my QTH .
73
Dan
K8ICB in Florida
Message: 7
Date: Mon, 28 Sep 2009 12:58:38 -0400
From: Joe Roth-WC4R w...@live.com
Subject: Re: [Flexradio] A better Idea for warranty work , make an
appointment !
To: 'Dan Eisenman' k8...@allprophoto.net,
flexradio@flex-radio.biz
Message-ID
How about this -You get a RMA and you are told when to send in the
unit for the least down time at Flex.
In my case I'm told the bride diode is out in my 5000A. Estimated
repair time is 3-4 weeks , I operate on a 75 meter net each night
so I'm going to be off the air for about a month.Thats
This is something new- FWD watts reads 1 watt out when real output is
100 watts out on external meter.
Any ideas-did a removal and reinstall software . new firewire driver
and 1.18.3
73
Dan
K8ICB in Florida
latest firmware, latest driver latest SRD
XP Home SP3
iMac
So I upgraded to Snow Leopard, Did a re install of XP home, but I
can't get SP3 to load.
Tried the BootDir set up via regedit and even change drives from C to
G, nothing working.
So what is the trick ?
73
Dan
K8ICB in Florida
___
FlexRadio Systems
A few months back I purchased a 5000A that is complete with second
receiver and the tuner, it came
from the factory with all the upgrades installed , unit has never been
opened .It is perfect condition and not a scratch etc.
I have the original box and all that came with it. I purchased it
the F5KA occasionally. I use the 2009 version of Norton anti-
virus to keep gremlins away and I have never logged delays greater
than about 280 usec.
Bob KF6BC
On Aug 5, 2009, at 12:36 PM, Dan Eisenman wrote:
I have been using an iMac dual core with the Flex 5000A for a few
months now.I
Hi Neal;
No no both off.
On Aug 5, 2009, at 3:43 PM, Neal Campbell wrote:
Do you have automatic update turned on? Any antivirus (they usually do
a system area scan on boot up)?
Neal Campbell
Abroham Neal Software
Programming Services
www.abrohamnealsoftware.com
(540) 242 0911
GRANITE DIGITAL
I have been using an iMac dual core with the Flex 5000A for a few
months now.I works great but I get freeze every so often in XP home
SP3 .
It is not caused by RF as it happens in receive mode most of the time.
I have a number of service already turned off to include wireless, IR,
auto
Hi Brian
Yes on paging turned off and I did the Hotfix .
I will recheck it again.
If you can send the list over I would appreciate it when you can.
73
Dan
On Aug 5, 2009, at 3:45 PM, Brian Lloyd wrote:
On Wed, Aug 5, 2009 at 12:36 PM, Dan Eisenmank8...@allprophoto.net
wrote:
I have been
Heil PR 781 Studio Microphone (For Ham Radio)
The PR 781 is a professional quality dynamic cardioid microphone that
works well with the iC-7800 and other Elite transceivers , Heil Sound
sells for $179 new.This one is in new condition and has a 6' cord Male
XLR to Female XLR included (about
SOLD SOLD ,thanks for looking ! Heil PR 781 Studio Microphone
(For Ham Radio)
The PR 781 is a professional quality dynamic cardioid microphone that
works well with the iC-7800 and other Elite transceivers , Heil Sound
sells for $179 new.This one is in new condition and has a 6' cord
better than my measurement, but still corresponds
to a 19 dB noise figure. Their measured 10 db (S+N)/N, 1 kHz, 30%
modulation sensitivity was 3.7 uV, and for 12 dB SINAD it was 1.4 uV.
73,
Clay W7CE
- Original Message - From: Dan Eisenman k8...@allprophoto.net
To: Clay W7CE w
- Original Message - From: Dan Eisenman k8...@allprophoto.net
To: Clay W7CE w...@curtiss.net
Cc: flexradio@flex-radio.biz
Sent: Monday, June 22, 2009 7:10 AM
Subject: Re: [Flexradio] Why An Extra Pre Amp On Six Meters
Hi Clay;
Thanks for your observations , have you actually put a signal
is minimum). I'm still experimenting with the best attenuator
setting, but I'd say you want at least 16-20 dB of gain.
I own five 6 Meter rigs, and the 5000A is the best by far since I
added the preamp.
73,
Clay W7CE
- Original Message - From: Dan Eisenman k8...@allprophoto.net
I have been using my 5000A on six meters , seems to work great as is ,
I have been
reading about the 3000 not needing a Pre Amp but adding one on the
5000A.
Just curious if any real lab test were run to confirm this data ? The
5000A seems fine to me , I don't seem to have any
trouble
Gerald;
I have installed it and I see the improvement especially in the NR .
Have had no issues using an iMac 24 with XP home SP3
Thanks for all the hard work !
73
Dan
K8ICB in Florida
On Jun 19, 2009, at 10:53 AM, Gerald Youngblood wrote:
Dear FlexRadio Customers:
We are pleased to
Just wanted to validate Dudley for all the time he put in helping me
with my SDR 1000 , we finally did get it working with my
Apple 24' iMac computer .It has been up and running for a few weeks
and seems to be problem free to this point .
I'm getting great audio reports and really like the
I'm looking for a used 5000A , can be fully loaded or just the plain
5000A , I want this for my personal use I'm not
going to resell it , I'm not a trader or dealer .I would also be
interested a second receiver and the auto tuner for the 5000.
That way I could get the basic 5000A and add the
I have been using my MFJ 998 with the Flex 1000 , I simple do the 15
watts on the driver and let the MFJ
sense the RF from the 1000 .I would like however to use a hard wire
between the MFJ and the 1000 .
Dudley mention to me on the phone that some Flexers had developed
software so that the
I'm looking for Flex 5000A , Also have a Icom 756 Pro III I would
consider trading for the Flex if you like knob
radios. Please email me if you have a 5000A for sale.The Icom is in
perfect condition.
73
Dan
K8ICB in Florida
___
FlexRadio Systems
So what's a good Mic for these rigs , I'm currently using a Heil HC-5
has a good sound but
does not seem to have much output and I have trouble getting the VOX
balanced .
I found this true with my Pro III , also was considering a Shure
444D if I can find one.
Any thoughts appreciated ?
73
Hi Group ;
I wish to get a Flex 5000A , I could sell my Icom 756 Pro III ;
however it occurred
to me that some one who likes knobs might want to do a trade .
The Pro III was purchased new about 2 years back from HRO in Atlanta,
is in
perfect shape with no marks works perfectly , comes with
I have been trying to get my Imac to work with the SDR 1000, it sort
of works but has audio drop out frequently.
I'm using XP SP2 with the Firewire Hot Fix for the SP2 Pack.
In a word the performance sucks !
I have changed the band width the buffers etc.
Any help would be appreciated.
73
Dan
Looking for a Ham that would be willing to put my SDR 1000 and FA 66
on their computer
to test it out.
I'm trying to run it on my Imac 24 and think I may have software
problems.
Any help would be appreciated !
73
Dan
K8ICB in Florida
___
FlexRadio
I recently purchased a used SDR 1000 , I'm having problems and would
like to hook up to someone else's computer
to see if it is the SDR 1000 or a possible computer problem I have on
this end.
I'm in Clearwater any help would be appreciated !
Thanks Dan
K8ICB in Florida
SDR 1000 with FA-66
Last year I had an SDR 1000 and got it to work with my 24 imac.
Unfortunately I sold it the software and the USB to Parallel Port
Adapter ,Guess I will need Windows XP
again, The USB parallel Adapter and as I remember I had to do an XP
patch to get the USB Drivers to load.
Any info from
I'm going to use a SDR 1000 on an iMac so I need the Flexradio USB
Parallel Port adapter Windows XP SP3 software .
Please send price and condition.
Thanks Dan
K8ICB in Florida
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
I recently purchase a new SDR 1000 , I'm trying to run it on an iMac
with boot camp and Windows
XP . Seems the software does not like boot camp as I'm having trouble
loading the software.
I finally got the Parallel cable working , and now the last hurdle is
the software for the FA 66 Sound
Hello;
Well I'm trying to get my software loaded for my shiny new Flex SDR
1000 , and when I try to
load the software I get fatal Error.
When the wisdom file is being created at the end a fatal error
message appears - Specified argument was out of range of valid values
parameter name '2' is
I have just purchased an SDR 1000 which I' m going to use with an iMac.
I need Windows FP , USB adapter with Parallel port , Griffin Powermate
Control Knob , firewire cable and maybe the internal tuner.
Please email me .
73 Dan
[EMAIL PROTECTED]
___
I have recently purchased a Flex Radio SDR 1000 , I would like to use
my MFJ 998 intellitunner with it.
MFJ has various interfaces cable selections for Yaseu and Icom , I'm
currently using it with my Icom Pro III , the MFJ interface
cable allows the Pro III to interface with the tuner , it is
45 matches
Mail list logo