Tim,
I tried changing polling on DDutil and that does not help the problem.
I shut down BobSMeter and started DX Labs Commander on RCP1.
Commander works like a charm on RCP1 with no delay issues. I shut down
commander and start up BobSMeter on RCP1 and I have nothing but delay
problems. Even DDu
I have been running the BobSMeter successfully paired directly with the
SDR cat port.
The meter is very quick and very accurate. Thank you
Beppe IK3VIG!!!
When I set it up with DDutil as the KB states the
meter is very very slow acting...like
it is not polling fast enough. Running a 5K with Wi
That worked for me as well with MixW. MixW now shows the correct frequency on
the waterfall.
Do you know how to solve the 1kc difference when spotting? I use dxlabs
spotcollector and all my RTTY spots are off by 1kc.
73,
Dan KG0AQ
--Forwarded Message Attachment--From: [EMAIL PROTEC
I am using the new software with the offsets now and still have problems. Cat
to MixW direct works great.
Cat to DDutil to Commander to MixW presents problems with the offset??
Dan> From: [EMAIL PROTECTED]> To: [EMAIL PROTECTED]; flexradio@flex-radio.biz>
Subject: RE: [Flexradio] Sharing CAT>
Steve,
Thanks for the tip and the great software. I had it up and running in no time.
Very good documentation and well written software. I'm using Commander as RCP1
and MixW as RCP3. The only strange behavior I've found is with the latest
1.11.0 software and the RTTY offsets in MixW. Using M
Is there a program out there that will successfully "share" a CAT port with two
programs?I have tried virtuallY with no success. I am trying to run DXLabs
Commander and MixW atthe same time. I realize that sharing one CAT port with
two programs could be problematic,but I am willing to accept t
Tim,
Concerning the TX Profile Management article. I have found that with v1.10.4
the leveler enabled tick box is NOT saved in the profile. It seems to stay
enabled or disabled no matter the profile. Is this by design or has this been
overlooked?
Dan KG0AQ
--Forwarded Message Attachment--
Tim,
The spike is NOT present on the RF signal. It is visible on the panadapter
and heard on monitor/speaker audio. I have my speakers isolated with a
transformer, though it occurs
with a direct connect to the speakers as well.
From: "Tim Ellison" <[EMAIL PROTECTED]>
I've been trying to rid my system of this problem with no luck.
Running 1.10.2 with P4 3.2G WinXP, SDR-1000 and Delta 44.
I have all lines coming into the breakout box isolated. I have
tried a variety of dma/audio/dsp buffers setting to no avail. The
spike on PTT release is 9K down without SR and 1
on to mute
mic audio when VAC is on and the front PTT is engaged?
From: "Tim Ellison" <[EMAIL PROTECTED]>
To: "Dan rooney" <[EMAIL PROTECTED]>,
Subject: RE: [Flexradio] Digital SSTV & External Mic Audio
Date: Sat, 30 Jun 2007 10:47:51 -0400
The newer versio
I am currently trying SVN1300 and it performs the same as V1.8. What
specific SVN version disables the VAC with a PTT in USB or LSB?
>From: "Tim Ellison" <[EMAIL PROTECTED]>
>To: "Dan rooney" <[EMAIL PROTECTED]>,
>Subject: RE: [Flexradio] Digital SST
I have EasyPal and Hampal running great using VAC 4.06 and N8VBvcom.
However, when I attempt to use my microphone & front panel PTT to voice
communicate between pictures the SDR1000 will key but not pass mic audio?
Running PowerSDR V1.80 in the DIGU or DIGL positions with VAC enabled. I am
runn
12 matches
Mail list logo
