The SDR-1000 is a fantastic radio on receive but I am having some issues
with transmitting.
The transmit audio just doesn't have any punch and the output power seems
to be about half compared to my Yaesu FT1000MP.
My watt meter peaks about 25 watts vs 1000MP which peaks about 50 watts on
Sometimes when I use the SDR-1000, the audio cuts out and then back on,
pulsing like that about once or twice per second.
I found a solution, which is to turn off PowerSDR and Turn off my Edirol
FA-66, then restart both.
It's not a big deal and doesn't do it often, but I was wondering if this is
to see if it happens again.
Thanks again for the tremendous support.
Doug, VA3CR
www.va3cr.net
-Original Message-
From: Eric Wachsmann [mailto:[EMAIL PROTECTED]
Sent: January 31, 2007 4:49 PM
To: 'Doug McCann VA3CR'
Subject: RE: [Flexradio] SDR Audio Problem
You may also
is invalid...
Test Run 4:
Now it works OK until 15 Meter Ext/Adv SSB
Indicator shows 70%
Message: Calculated gain is invalid...
Every test SWR on external meter is showing 1.1:1
Power out on external meter is varying with tests but never exceeding 100
watts
Doug McCann, VA3CR
4 matches
Mail list logo
