Hi All
I am scratching my head trying to figure out what I am doing
wrong trying to get DDutil , SPE 1k-FA and the flex 5000a talking to each
other and working. I am hoping someone has been successful in making this
work especially setting up autodrive etc. Is there a cheatsheet
Hi All
I seem to be experiencing on transmit what sounds like an
"echo" its sounds like a delay i.e. a few milliseconds , i'm pretty sure now
after some months of trying to eliminate it that it might be rf getting in
somehow
I am using the current Test SVN as
Hi All
I seem to be experiencing on transmit what sounds like an
"echo" its sounds like a delay i.e. a few milliseconds at first i thought it
was RF getting in..but on air reports say its an echo.
I have tried on current Test SVN as well as K6JCA consoles
and
Hi All
I am planning to purchase an SDR 5000a and that means I have
my current SDR1000's as surplus.
I have
1 X SDR1000 (4 pin mic socket) approx year of manufacture 2005..all ECO's
installed..100watts with D44 Sound card .I am looking for $1200 AUD +
shipping (happy to
Hi All
I'm wondering if anyone is using a E-MU 1212M sound card
with the SDR1000 and if there is any benefits over using the supported
M-Audio D44. I currently run my SDR 1000 with the D44 Card on a AMD 2800+ &
1 Ghz RAM with XP SP2. I'm not unhappy with the performance but it a
Hi All
I'm wondering if someone has written a band plan file for
IARU Region 3 (AUS) & RFDS for SDR1000. I would like to have the band
segments displayed as I tune around. I would be happy for any info how to
write file myself if no one has done it yet.
Thanks
Paul - VK3
Hi All
Thanks for all the replies..suggestions have been great..I
can confirm that using the Altec Lansing VS2220 certainly in my
circumstances did the trick..I am successfully using them with not a hint of
RFI so again for the guys who suggested the VS2220. iI'm sure if i had
Hi All
I read in the knowledge base re the use of quality powered
speakers. I am currently setting up my SDR1000 and do not have quality
powered speakers ;) the models in the knowledge base I have been unable to
source here in VK through usual sources, so I am hoping someone can
Hi All
I have the following boards installed in my SDR1000
BPF – 3.2 – 0434-033
RFE – v1.4 – 0429-050
TRX 3.2 – 0434-033
PIO 2.1 – 0434-033
It has the 4 pin mic socket on the front panel
The inside enclosure from back panel to front panel measure 7.5 “
I followed
Hi All
I have been trying to get my 2nd hand sdr1000 to work 100%. I
appear to have a glitch that I’m not sure how its being caused. The sdr1000
starts ok, relays click and receiver comes alive, then for no apparent
reason signal is lost and there is just noise, if I switch off the
Hi All
I am anxiously awaiting the arrival of SDR1000. I was lucky enough
to source a 2nd hand 1 watt version its approx 12 months old so I guess I am
going to have to find out if there any upgrades/fixes that will be required.
I'm going to pair it up with a Delta 44 s/card that I
11 matches
Mail list logo