Yeah, seen this. there is speculation it was in Texas and also speculation
it was Dudley...
--
From:
Sent: Sunday, July 18, 2010 9:00 AM
To:
Subject: FlexRadio Digest, Vol 63, Issue 18
Send FlexRadio mailing list submissions to
flexradio@flex-
Regarding K9DUR Rays high SWR reading
This situation is exactly what happened in my station for a period of time.
Even though you have a high SWR reading, look at your DC current draw from the
power supply. You will see the radio is not transmitting and has shut down.
Resolve: Place 1 or 2 r
I had very same problem and it appears that SWR is not the problem but RF in
the shack is. I added two (2) radio shack cable type clamp on chokes to the USB
cable about 6 months ago and problem resolved. Put the Chokes right at the
computer where the cable plugs in. Chokes a little loose on usb
Ref: question on using Quadra Amp with SDR-1000
I have been using SDR-1000 with my Quadra for about a year with no problems.
When selecting bands (RF sense) I use about 30 watts in cw mode and key the amp
and press the F SET button to get proper band.
Works like a charm and doesn't take much m
problem a slight bit.
My thoughts, maybe this disconnect precaution is too sensitive. If was normal
analog type radio, would just tighten it up a bit and know all would surely be
fine as the level of swr is really low so therefore should not be a problem.
John W6FE
Attn: Service Department
Re: SDR-1000 with ATU and DEMI144-28FRS installed.
Date Received: 16 Feb 2006.
Problem: Unit fails to release key line to external rf amplifier upon USB
adapter abort.
I am (attempting) using the SDR-1000 to drive my Yaesu Quadra VL-1000 soiid
state RF Amplifier and w
6 matches
Mail list logo