] Buffer Size for use with new device driver 3.2.0.1556
While I'm thinking of it, would it not be possible for PowerSDR to read
out the sample rate and buffer size set in the device driver and use
those values instead of putting the onus on the user to configure the
same matching information i
y bad.
-Tim
-Original Message-
From: Tim Ellison
Sent: Wednesday, September 03, 2008 10:56 AM
To: 'Howard Grams'; FlexRadio List
Subject: RE: [Flexradio] Buffer Size for use with new device driver 3.2.0.1556
"The earlier device driver reported a suggested minimum buffer si
driver?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Howard Grams
Sent: Wednesday, September 03, 2008 10:39 AM
To: FlexRadio List
Subject: [Flexradio] Buffer Size for use with new device driver 3.2.0.1556
Hi all,
I followed the instructi
.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Howard Grams
Sent: Wednesday, September 03, 2008 9:39 AM
To: FlexRadio List
Subject: [Flexradio] Buffer Size for use with new device driver 3.2.0.1556
Hi all,
I followed
Hi all,
I followed the instructions for upgrading in order the Firewire device
driver 3.2.0.1556, the firmware 1.2.1.1556, and finally PowerSDR 1.14.0.
When I go to configure the sampling rate and buffer size in the
FLEX-5000 Firewire control panel, I select my favorite sample rate of
192kHz.
5 matches
Mail list logo