[Flexradio] Firewire port

2012-04-04 Thread reliant325
Hi, I have previously owned and used a 3000 and a 1500 with success and enjoyed the experience. Recently, I acquired a 5000 with second RX and ATU. It performs as expected except for one small thing:- One of the Firewire ports doesn’t seem to function in that the PC doesn’t recognise it. The oth

Re: [Flexradio] firewire port

2011-08-22 Thread Tim Ellison, W4TME
You are probably OK. You experienced an abnormal shut down that put the radio into a "funky" state. The full power cycle cleared it up. -Tim --- Tim Ellison, W4TME Product Management, Sales & Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 22

[Flexradio] firewire port

2011-08-21 Thread Leon
Had something strange (to me) happen yesterday. I heard it start to thunder and knew we were in for our evening thunder storms, so un-plugged the antenna cable. As I was reaching to turn off the computer, we lost power. No big deal I thought. So when the power came back on and the thunder st

Re: [Flexradio] Firewire Port Question

2010-10-24 Thread Tim Ellison
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Roger Cole Sent: Sunday, October 24, 2010 9:01 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Firewire Port Question If plugging the firewire into the port on the FLex shorts out that port does it also have the same effect on the computer

Re: [Flexradio] Firewire Port Question

2010-10-24 Thread William H. Fite
i don't know what the li'l green led is for, either, but it does NOT indicate correct function. I got a defective cable from Granite (they replaced it without question) and the green light shone brightly the whole time it was plugged in and I was cursing. Bill. On Sun, Oct 24, 2010 at 9:01 AM,

[Flexradio] Firewire Port Question

2010-10-24 Thread Roger Cole
If plugging the firewire into the port on the FLex shorts out that port does it also have the same effect on the computer end? I know I didn’t force the connection on the Flex but the results were the same...back to Flex for repair...but now do I have to be concerned about the port on the compu