ge-
> From: Graham Haddock
> Sender: flexradio-boun...@flex-radio.biz
> Date: Wed, 11 May 2011 13:06:04
> To: F5UL
> Cc:
> Subject: Re: [Flexradio] Flex-1500 and MixW 3.0.1b
>
> Bob:
>
> If you are using VAC to connect the audio between PowerSDR and MixW, m
Message-
From: Graham Haddock
Sender: flexradio-boun...@flex-radio.biz
Date: Wed, 11 May 2011 13:06:04
To: F5UL
Cc:
Subject: Re: [Flexradio] Flex-1500 and MixW 3.0.1b
Bob:
If you are using VAC to connect the audio between PowerSDR and MixW, make
sure
that the settings inside VAC are not causing
Also make sure that PSDR is running VAC before you start MixW so VAC uses
the 48K freq that PSDR sets it to!
73
Neal
On Wed, May 11, 2011 at 2:06 PM, Graham Haddock wrote:
> Bob:
>
> If you are using VAC to connect the audio between PowerSDR and MixW, make
> sure
> that the settings inside VAC a
Bob:
If you are using VAC to connect the audio between PowerSDR and MixW, make
sure
that the settings inside VAC are not causing re-sampling to occur. Since
the default
sampling rate for PCs is 44.1 ksps, rather than the 48 ksps that the 1500
runs at,
sometimes VAC will resample to 44.1, then res
Good evening, all on the list!
I'm new member and user of Flex products, but i'm not ignorant about SDR and
direct conversion Rx/Tx.
The Flex-1500 is a wonderfull transceiver, in use since 3 days and working
without problems with Ham Radio de Luxe,
MixW 3.0.1b, WSPR
I have a, let say, small p
5 matches
Mail list logo