I think this was mentioned before but anyway...
If you can't print a file direct like: myfile /dev/LP03, you have
another problem.
If you can print lp myfile -dLP03 but alarms do not go to that same
printer read on.
On one of your hosts go to the directory /usr/fox/cs:
1 remove (if it
If I understand you correct, you want to set one or more Real-outputs on the
sequence block to 0?
Unfortunately, in HLBL you cant make a variable variable. So you cant build
a string which happens to match a variable you declared and then use it in a
statement. However, you CAN build variable
Ah, almost right this first time,
It should ofcourse be:
FOR i := 1 TO 9 DO
number := i;
::'block_name'.RI000'number' :=0;
ENFOR
FOR i := 10 TO 12 DO
number := i;
::'block_name'.RI00'number' := 0;
ENDFOR
where 'i' is declared as interger and 'number' as string.
-Original
Dear Ron,
As you said and as I mentioned earlier, I checked device monitor before and is
not a problem as process (block) alarms are getting printed (on LP03) and the
status of LP03 in DEV_MONITOR is showing OK.
The problem:
System monitor alarm messages, which are configured for this
Hi all,
The problem got resolved by rebooting the DZLI for this node.
I have a questions, is system alarm messages using Device Monitor for routing
messages to printer?
As when I rebooted DZLI (LAN module), one of the WP on this node has become the
device monitor master and started printing
When you perform on online transfer download to an existing compound, that compound is left turned OFF, is this necessary ? or could an option be provided to select the mode of the compound after download ?
Regards,
Gabriel.
Hi List,
is it possible to purchase virus protection software for 50 Series AW's? If so can you recommend a package?
thankyou,
Con Kiely
[EMAIL PROTECTED]
Thanks everyone for the help with Enclosure Loading on FoxCAE.
The next enhancement request for FoxCAE I have is for FoxCAE (and SysDef) to
recognize all possible FBM types. We have a bunch of FBM37's, which are 8
4-20 mA analog Outputs on 1 card. Foxboro doesn't have a lot of
documentation on
Gabriel,
This is fixed for FoxCAE 4.2 that is
currently in the release process and should be available soon. The compound parameters
are no longer downloaded for single blocks and the ON parameter is never
downloaded for existing compounds.
Stephan Meyer
CAE-Tools, Inc.
781 784
Tim,
The FoxCAE 4.2 release is already in the release process but I will ask
somebody at Foxboro to add a PT that the FBM37 information is missing
and it can be added for the 4.3 release of FoxCAE.
You might submit a CAR in order to make sure that the problem is
recognized.
Stephan Meyer
Title: CAE suggestions
Freddy,
As fare is I know, SFC_ST only installs on
the I/A platform requiring some of the components. The
ability to define and document SFC without a full implementation of SFC_ST
would be an enhancement for SFC_ST rather than FoxCAE.
Regards,
Stephan
Depending on how you are monitored, you might try www.safeweb.com.
-Original Message-
From: Joe Gale (MP) [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 27, 2001 12:36 PM
To: 'Foxboro DCS Mail List'
Subject: RE: [ADMIN] List Archive
The only problem with the new archive is that it is
Title: Printers again
Hi Gang,
I see on the list that printers and device monitors are the hot topic again.
Well, I have a problem with that too.
Our colour printer is connected to the parallel port of the AP.
If I look at SMDH, the printer shows: On line, Not failed.
Yet, a freshly
list,
We are in version 6.1
4 printers are configured and connected
LP00/01/02/04 to the COMM.
1 printer (LP05) is configured (AW51,PAR) but not
connetced yet.
All the 4 connected printers print correctly
process alarms (LP00), system alarms (LP04), operator actions(LP01) and screens
14 matches
Mail list logo
