Thanks for the responses.
You could choose Special Page Break. The problem with that method is
that FrameMaker removes the page break anytime you remove overrides.
What?! Really?! In Word this is style independent and is a hard break , as
real as typing avi or any ASCII character(s). No way of
Hi all,
How can I split a table in the middle?
I have a table followed immediately by a heading. How do I add a new text
paragraph between the table and the heading?
TIA
- avi
___
You are currently subscribed to Framers as arch...@mail-archive.com.
The table is anchored to something. Go to the anchor and press enter.
Then you can have a new paragraph.
However, if it much better if you make a place holder for the tables.
The table should have its own tag and not be attached to the previous paragraph.
The font size can be very small, I have
If anyone needed to add a couple of lines somewhere in the document
before this table, resulting in moving the table (a small one I
suppose) to the next page, or had to delete some contents resulting in
the opposite direction of move, would you still want this page brake
where you put it
Think about this again from a different direction.
My headings are following obviously by text. I fixed the text style so that if
there is a small amount of text following a heading, it will force the heading
to be at the top of anew page.
The text after the headings is called BodyAfterHeading,
Typically, you do one of the following:
1. Decide in your book design all Heading1s, for example, will always start
at the top of the page. In that case, build it into the paragraph style
using instructions others have posted to the list.
2. When the content is complete, do copy-fitting to make
Looking at Sharon's, Caroline's, and my earlier post on this subject:
Setting the Heading1 para format to start at top of page is a smart idea. In
the Heading1 format, set Keep with Next. The following item, typically a Para,
should have the Widow/Orphan value set to a minimum of 3 which
Hi everyone,
Thanks to this list, I received great advice and two very good solutions
for dealing with my PDF import problem. Here's a summary for anyone that
runs into this issue in the future:
Problem -
I am bringing highly detailed drawings into FrameMaker 8. These drawings
are PDFs
Performed redaction (blackout or whiteout to sanitize a document) from
within pre-8.x FM?
I can use lightweight redaction, meaning that the underlying information
might still be in the output file-because in this case the deliverable is on
paper. I assume this could be done by applying a
Hi Nancy,
I use press the Applications key and then F12.
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nancy Allison
Sent: Thursday, January 15, 2009 11:21 AM
To: framers@lists.frameusers.com
Subject: Esc-m-p to
FrameMaker Users:
Registration is now open for Documentation and Training West, Moving
from Unstructured to Structured Content, March 17-20, 2009 in Palm
Springs. The event features two days of software and skills
development workshops (half- and full-day sessions) taught by industry
Hi everyone,
I've run into a very frustrating situation in creating index entries where, if
I'm using Emphasis Default Para Font combination to italicize certain
entries or portions of entries, it plays havoc with the next entries in the
list, the regenerated index combines the next
Joseph, your understanding is incorrect.
Because the text in a text inset is in the document, it's indexed, TOCed,
and otherwise treated as typed text.
***
Just as a usability thing, why wouldn't you want content from the insets to
be tracked?
Or put another way, what are you trying to do?
Art
Hi Avi,
I'm hearing you wish for a command similar to Table Convert Table to
Text in MS Word, wanting to create two separate tables regardless of page
breaks. I don't think there's a clean way to do that in FM. There's a
Convert command on the Table menu, but rather than breaking a row into a
Responding to Avi Makeler, Lea Rush wrote:
I'm hearing you wish for a command similar to Table Convert Table to
Text in MS Word, wanting to create two separate tables regardless of page
breaks. I don't think there's a clean way to do that in FM. There's a
Convert command on the Table
And in addition to this, make sure that your View Options include turning on
all text symbols, or you won't be able to see the anchor points or
paragraphs.
If you want to split a table... just define and cut the tail of the existing
table.
Add a couple of carriage returns, go the the last empty
Hi all,
FM8 seems to be sluggish on my PC. I mean trivial cursor tasks like jumping
the cursor from one word to another or selecting text. My PC is a 2.8 GHz
Pentium IV (full architecture) and it is really fast and great for
everything else.
FM7.2 is much more snappy on my PC.
Has anybody else
Hi All,
Seasons greetings!!
I am looking at getting certified on FrameMaker. Is ACE the best possible
and universally accepted certification? I am sure many readers in this
community are ACE certified. Would be grateful if you could provide me with
some details reg this certification.
Thanks
Hi,
Same thing happens to me with FM 8..when the Hypertext dialog box is open...
Have a nice day!
At 12:31 PM 19/01/2009, Avraham Makeler wrote:
Hi all,
FM8 seems to be sluggish on my PC. I mean trivial cursor tasks like jumping
the cursor from one word to another or selecting text. My PC is a
How much RAM do you have?How much free disk space on the C drive? What
operating system are you running?
Do your files contain graphics that have been copied into the Frame files,
or are they imported by reference?
Art Campbell
art.campb...@gmail.com
... In my opinion, there's nothing
Just askin. ;- )
If it were me, I'd include a special trigger para tag in the text inset and
in the TOC that only appears at the beginning nad end of the text inset ..
something like TextInsetMarker.
They either delete everything between the beginning and ending entries in
the TOC manually or
Hi, Joseph:
Is there a compelling reason NOT to tag non-feature H1s with a name
like H1NonF, and extract only regular H1s for the TOC?
You can create a book file for all the non-feature documents and use
find/replace to replace all H1 with H1NonF in one pass, by:
* Make secure backups of all
Frame 7.0p576; Windows XP Pro
I have several small graphics that I need to send to a client. However, I
imported them directly into the FM document instead of importing by reference
(a mistake made way back when). Now I need to send copies of these graphics to
the client. Most are in TIFF
Btw, something like this also happens when I do Gmail in IE7 on my T30
laptop (1.8GHz but 7 years old),
but with Chrome it's fine.
Buy a new computer?Is there really much faster out there than a ~3GHz.
Add some RAM?
For point actions like jumping from one word to another, I don't really
think
Howard Rauch wrote:
I have several small graphics that I need to send to a client. However, I
imported them directly into the FM document instead of importing by
reference (a mistake made way back when). Now I need to send copies of
these graphics to the client. Most are in TIFF format.
Stephen you're a genius! I was l always working with the Designer dial boxes
open (definitely more professional that way... - like having side panels
open in Vis Studio, and HTML editors etc.), so I closed them, and la voila!
that did the trick!
Thanks!
- avi
On Mon, Jan 19, 2009 at 7:50 PM,
Howard,
You could also create a PDF, then export the PDF to HTML. The export will
create GIFs of all of the graphics.
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Howard Rauch
Sent: Monday, January 19, 2009 12:51
Makes sense to me. When the dialog windows are open they are required to report
their state. They are updated depending on where the cursor is placed. This is
like having multiple active windows open.
-Original Message-
From: framers-boun...@lists.frameusers.com
The designer boxes may have caused the problem, but you're going to run into
more problems with only 1G of RAM. That's a very minimal amount... 2G or
more is recommended if you work with long documents or want to have another
RAM-hungry application running at the same time (like photoshop).
ARt
Systec's Imported Graphic or Export Copied Graphics plugins should do
it. They are some of their Toolbox plugins. It looks like the first one
works on one graphic at a time. The latter plugin can process all at once.:
https://www.systec-gmbh.com/os/index.php?language=en
Mike Wickham
-
You can also use MIF2Go (even the demo version) to export graphics from
a Frame document.
Micheal O'Laoghaire
Comverse Inc,
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Mike Wickham
Sent: Monday, January 19, 2009
Lucie,
You wrote:
I've run into a very frustrating situation in creating index entries
where, if I'm using Emphasis Default Para Font combination
to italicize certain entries or portions of entries, it plays havoc
with the next entries in the list, the regenerated index combines the
next
My company sent out a press release today, which I wanted to share. Our new
service gives FrameMaker users the opportunity to have their doc templates
analyzed to be optimized for Globalization and Localization. We will also
have some upcoming webinars that will include best L10N practices for
Avi Makeler wrote:
Thanks for the responses.
You could choose Special Page Break. The problem with that method is
that FrameMaker removes the page break anytime you remove overrides.
What?! Really?! In Word this is style independent and is a hard break , as
real as typing avi or any
Hi FrameUsers
It's here:
http://www.adobe.com/products/framemaker/
http://www.adobe.com/products/technicalcommunicationsuite/
Cheers
--
Yves Barbion • Managing Director • Adobe-Certified FrameMaker Instructor
www.scripto.nu • skype: yves.barbion • T: +32 494 12 01 89
Hi all,
I have a table *immediately* followed by a heading, the latter being almost
at the end of the page. So I would like to insert a page break before the
heading. How do I do that?
Maybe connected to the above (in Word it would be), I would also like to
know how to convert just one row of a
Thanks for the responses.
>> You could choose Special> Page Break. The problem with that method is
that FrameMaker removes the page break anytime you remove overrides.
What?! Really?! In Word this is style independent and is a hard break , as
real as typing "avi" or any ASCII character(s). No
Hi all,
How can I split a table in the middle?
I have a table followed immediately by a heading. How do I add a new text
paragraph between the table and the heading?
TIA
- avi
The table is anchored to something. Go to the anchor and press enter.
Then you can have a new paragraph.
However, if it much better if you make a "place holder" for the tables.
The table should have its own tag and not be attached to the previous paragraph.
The font size can be very small, I have
If anyone needed to add a couple of lines somewhere in the document
before this table, resulting in moving the table (a small one I
suppose) to the next page, or had to delete some contents resulting in
the opposite direction of move, would you still want this page brake
where you put it
Think about this again from a different direction.
My headings are following obviously by text. I fixed the text style so that if
there is a small amount of text following a heading, it will force the heading
to be at the top of anew page.
The text after the headings is called BodyAfterHeading,
Typically, you do one of the following:
1. Decide in your book design all Heading1s, for example, will always start
at the top of the page. In that case, build it into the paragraph style
using instructions others have posted to the list.
2. When the content is complete, do copy-fitting to make
Avi Makeler wrote:
> How can I split a table in the middle?
Tables should automatically split across pages as necessary.
But note that they will only split on row boundaries; they will
*never* break in the middle of a row. And also note that if
you create any cells that straddle multiple rows,
Sharon Burton wrote:
> Inserting page breaks for copy-fitting while you are crating content
results
> in a large amount of rework in the future, as added content will move
page
> breaks around and must manually be managed.
Very, very true!
I am an old school writer and was taught to get the
Looking at Sharon's, Caroline's, and my earlier post on this subject:
?
Setting the Heading1 para format to start at top of page is a smart idea. In
the Heading1 format, set Keep with Next. The following item, typically a Para,
should have the Widow/Orphan value set to a minimum of 3?which
Joseph, your understanding is incorrect.
Because the text in a text inset is in the document, it's indexed, TOCed,
and otherwise treated as typed text.
***
Just as a usability thing, why wouldn't you want content from the insets to
be tracked?
Or put another way, what are you trying to do?
Art
Hi Avi,
I'm hearing you wish for a command similar to Table > Convert > Table to
Text in MS Word, wanting to create two separate tables regardless of page
breaks. I don't think there's a clean way to do that in FM. There's a
Convert command on the Table menu, but rather than breaking a row into a
Responding to Avi Makeler, Lea Rush wrote:
> I'm hearing you wish for a command similar to Table > Convert > Table to
> Text in MS Word, wanting to create two separate tables regardless of page
> breaks. I don't think there's a clean way to do that in FM. There's a
> Convert command on the Table
And in addition to this, make sure that your View Options include turning on
all text symbols, or you won't be able to see the anchor points or
paragraphs.
If you want to split a table... just define and cut the tail of the existing
table.
Add a couple of carriage returns, go the the last empty
Hi all,
FM8 seems to be sluggish on my PC. I mean trivial cursor tasks like jumping
the cursor from one word to another or selecting text. My PC is a 2.8 GHz
Pentium IV (full architecture) and it is really fast and great for
everything else.
FM7.2 is much more snappy on my PC.
Has anybody else
Hi All,
Seasons greetings!!
I am looking at getting certified on FrameMaker. Is ACE the best possible
and universally accepted certification? I am sure many readers in this
community are ACE certified. Would be grateful if you could provide me with
some details reg this certification.
Thanks &
Hi,
Same thing happens to me with FM 8..when the Hypertext dialog box is open...
Have a nice day!
At 12:31 PM 19/01/2009, Avraham Makeler wrote:
>Hi all,
>FM8 seems to be sluggish on my PC. I mean trivial cursor tasks like jumping
>the cursor from one word to another or selecting text. My PC is
How much RAM do you have?How much free disk space on the C drive? What
operating system are you running?
Do your files contain graphics that have been copied into the Frame files,
or are they imported by reference?
Art Campbell
art.campbell at gmail.com
"... In my opinion, there's
Just askin. ;- )
If it were me, I'd include a special trigger para tag in the text inset and
in the TOC that only appears at the beginning nad end of the text inset ..
something like TextInsetMarker.
They either delete everything between the beginning and ending entries in
the TOC manually or
Hi, Joseph:
Is there a compelling reason NOT to tag non-feature H1s with a name
like H1NonF, and extract only regular H1s for the TOC?
You can create a book file for all the non-feature documents and use
find/replace to replace all H1 with H1NonF in one pass, by:
* Make secure backups of all
Frame 7.0p576; Windows XP Pro
I have several small graphics that I need to send to a client. However, I
imported them directly into the FM document instead of importing by reference
(a mistake made way back when). Now I need to send copies of these graphics to
the client. Most are in TIFF
Btw, something like this also happens when I do Gmail in IE7 on my T30
laptop (1.8GHz but 7 years old),
but with Chrome it's fine.
>> Buy a new computer?Is there really much faster out there than a ~3GHz.
>> Add some RAM?
For point actions like jumping from one word to another, I don't really
Howard Rauch wrote:
> I have several small graphics that I need to send to a client. However, I
> imported them directly into the FM document instead of importing by
> reference (a mistake made way back when). Now I need to send copies of
> these graphics to the client. Most are in TIFF format.
>
Stephen you're a genius! I was l always working with the Designer dial boxes
open (definitely more professional that way... - like having side panels
open in Vis Studio, and HTML editors etc.), so I closed them, and la voila!
that did the trick!
Thanks!
- avi
On Mon, Jan 19, 2009 at 7:50 PM,
Howard,
You could also create a PDF, then export the PDF to HTML. The export will
create GIFs of all of the graphics.
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Howard Rauch
Sent: Monday, January 19, 2009
Makes sense to me. When the dialog windows are open they are required to report
their state. They are updated depending on where the cursor is placed. This is
like having multiple active windows open.
-Original Message-
From: framers-bounces at lists.frameusers.com
The designer boxes may have caused the problem, but you're going to run into
more problems with only 1G of RAM. That's a very minimal amount... 2G or
more is recommended if you work with long documents or want to have another
RAM-hungry application running at the same time (like photoshop).
ARt
Systec's "Imported Graphic" or "Export Copied Graphics" plugins should do
it. They are some of their "Toolbox" plugins. It looks like the first one
works on one graphic at a time. The latter plugin can process all at once.:
https://www.systec-gmbh.com/os/index.php?language=en
Mike Wickham
You can also use MIF2Go (even the demo version) to export graphics from
a Frame document.
Micheal O'Laoghaire
Comverse Inc,
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Mike Wickham
Sent: Monday, January 19,
Lucie,
You wrote:
>I've run into a very frustrating situation in creating index entries
>where, if I'm using combination
>to italicize certain entries or portions of entries, it plays havoc
>with the next entries in the list, the regenerated index combines the
>next entry into the one I
My company sent out a press release today, which I wanted to share. Our new
service gives FrameMaker users the opportunity to have their doc templates
analyzed to be optimized for Globalization and Localization. We will also
have some upcoming webinars that will include best L10N practices for
Avi Makeler wrote:
> Thanks for the responses.
>
> >> You could choose Special> Page Break. The problem with that method is
> >> that FrameMaker removes the page break anytime you remove overrides.
>
> What?! Really?! In Word this is style independent and is a hard break , as
> real as typing
Shlomo,
You hit the nail on the head! I was at release 266. I thought I had
updated to the latest release but obviously I hadn't.
I just downloaded the latest patch (I'm now at 273) and regenerated my
index after applying the patch. All the missing entries now displayed!
The problem has been
68 matches
Mail list logo